Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Corrosion-resistant brand product GOK type EN61.Characteristics:EG prototype release approved after DGR,for connecting directly to a liquefied gas bottle up to 14 kg,PS 16 bar, flow rate: 0,8 kg/h / 1,5 kg/h,inlet KLF, outlet G¼"LH-KN, with PRV,optionally shipping with manometer.
Very nifty, foldable grill made from stainless steel in the design of the famous ESBIT cooker.The cooking grate (29 x 22cm) is threefold adjustable in height, the lid also serves as base plate and protects the ground.Storage of the charcoal in a practical, water-proof coal bag, that can also be stored in the folded grill.Shipping in a robust, high end Nylon carrying case with a shoulder strap.Pack size: 305 x 230 x 90 mm. Weight: 2,4 kg.
Simple oval drawer handle for sliding doors, polished or chromed deep-drawn brass plate.
Carbon monoxide detectors from KIDDE, the world's leading manufacturer of smoke and CO detectors for the home. With state-of-the-art, certified sensor technology in accordance with EN 50291:2010, an integrated 10-year power supply and a 10-year manufacturer's guarantee, KIDDE offers maximum safety in the event of carbon monoxide leaks.In the case of heating appliances that run on wood, coal, heating oil or gas, CO can escape into the room air if they are insufficiently maintained, improperly installed or if the flue is blocked. The life-threatening gas cannot be seen, smelled or tasted!The CO detector from KIDDE warns you with a loud alarm signal if carbon monoxide escapes. The alarm is triggered in relation to the measured CO concentration in the room air (in accordance with EN50291). This means: timely warning of CO concentrations that can lead to unconsciousness and death within a short time. Additional safety is provided by the X10-D model, which shows a CO concentration in the room air from 30 ppm on a digital display. A peak value memory ensures that a CO leak is reliably displayed even after a long period of absence
Round ventilation rosette to embed.Made from plate brass (thickness 1mm), pressed.Polished or chromed brass finish.
Square ventilation panels. Made of stainless steel sheet or of brass with a nickel-plated finish. Polished.
Four part table bracket set made from stainless steel A2, consisting of two wall sheets 85 x 53 x 2mm and two angle pieces 75 x 45 x 27 x 2mm, with 6 mm countersunk holes.
Plain functional cubbyhole for fitting in the locker, under cupboards or on the planking.White nylon netting, mesh size approx. 35 x 35 mm, bordered by a rubber lining of 4 mm.The net is mounted with four black plastic hooks.
Solid design with oval screw-in plate and adjustable handle. Polished brass.Plate size 50 x 30 mm.
Trapezoidal step plates for companionways or bathing ladders. The frame is made of brass. The white rubber pad prevents slipping on a step.
Heavy stainless steel flush ring with ergonomic, fully countersunk handle. With spring lock functionality. Polished finish. Comes with striking plate.
Strong flush handle made from polished, precision cast stainless steel.Very easy to mount flush, because of only small installation depth.
Shapely round latch for a hatch or a drawer made from precision casting innox with concealed screw holes.No clatter due to the spring-loaded handle!Mounting on plastic or ply wood is easily possible since the fitting is not trimmed in, a mounting hole of 25mm is required.
Shapely square latch for a hatch or a drawer made from precision casting innox with concealed screw holes.No clatter due to the spring-loaded handle!Mounting on plastic or ply wood is easily possible since the fitting is not trimmed in, a mounting hole of 25mm is required.
The matching mahogany profile for the flexible MiniSleeve LED strip from BÃ¥tsystems.Made for the concealed, indirect mounting of the version side light.Made from real mahogany wood, sanded, unvarnished, undrilled.Measurements: 35 x 25 x 25mm, groove width 4mm.Comes without the light strip Mini Sleeve (which must be ordered separately, see "Suitable Items").
A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.
Sturdy door handle made from polished stainless steel with a folding handle.Weight: 130g.
Sliding door lock, made entirely of stainless steel with the very low lock case installed depth of 43 mm.For profile cylinder!The hooking latch ensures a secure door lock.Can be used for left or right installation. Square V = 8 mm.Comes with profile cylinder (PZ) and striking plate.Shield and push piece sold separately.
Profile cylinder for sliding door lock stainless steel (4803-010).Shipping with 3 keys.
Small wall hook made from 2 mm thick A2 stainless steel flat stock.
Traditional fiddle fitting for the insertion of 12mm wood ledges. During swell, they are attached around the table to keep objects from falling off. Cast brass, polished finish. Weight: 35 g.
