Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
LED bulb for G4 socket.Voltage range 10-30V DC.Light colour warm white (3000 K).For many reasons modern LED light units are extremely practical for various deployments on board: because of the low consumption of the LEDs scarce battery capacities can be effectively employed. The extremely long life span and their vibration resistance guaranty reliable long term usage without the need to replace them. Low heat emission. Most lamps used on board can easily be converted with the various LED bulbs.We state the brightness in Lumen (lm).
LED reflector lamp type MR16 for 230 V AC voltage.Consumption 5.5 W (Article-No. 4519-103: 4 W).Light colour warm white 2,700 K.Available with different beam angles.The lamp 4519-103 fits into the wall lamp of the traditional English company DAVEY London.
High-quality brass lamp socket with porcelain inset.Matches the HNA lights.
Brass wall bracket for HNA lights. The wiring of the light can be done from behind.
Small, watertight HNA standard light originally used in the commercial shipping industry. Made of heavy cast brass with a glass globe. Avaiable with one or two cable glands.Protection class IP56Weight: approx. 750-800g
Half round anti-dazzle screen made from brass sheet metal, compatible with the HNA engine room light (4520-163) and the HNA wall mounted light (4520-631).Simple fastening with a gripper clamp,clamping range: 105 - 115 mm,Hight of the shade: 150 mm,Diameter: 105 mm.
Heavy, waterproof luminaire for wall or ceiling mounting.Made of cast brass, sandblasted. The basic housing has two strong base lugs for mounting.Cable entry(s) to DIN 89280 for shielded, earthed cables. Version without protective grille.4520-163 with one cable entry.4520-164 with two adjacent cable entries.Socket E27, max. 100 W. Protection class IP56.
Small watertight brass light for wall or ceiling mounting.Cast brass, sand-blasted. The base of the housing has two strong bottom flaps for attachment.Cable gland meets the DIN 89280 requirements for shielded, grounded cables. With protection cage of heavy cast brass.E27 socket. Max. 100 W. Protection class IP56.Avaiable with one or two cable glands.
Small watertight brass light for wall or ceiling mounting.Cast brass, sand-blasted. The base of the housing has two strong bottom flaps for attachment.Cable gland meets the DIN 89280 requirements for shielded, grounded cables. With protection cage of 5 mm brass wire, soldered and riveted.E27 socket. Max. 100 W. Protection class IP56.Standard version comes with one cable gland, two cable glands side by side or opposite are also possible on request.
Heavy, waterproof wall light made of solid cast brass with screwed-in ribbed polycarbonate dome glass. The cable gland is hidden in the wall bracket, which makes the lamp also suitable as a home entrance light. The elongated shape of the protection glass also allows the use of an energy-saving lamp. Wall distance 140 mm. Weight 1.85 kg. Brass bipod socket E27, max. 75 W. Protection class IP56. Supplied without bulb.
Spare TL8 tubes for fluorescent lamps.Can be used in 12V and 24V lamps.
Classic heavy light, as was used in the past on merchant ships as chart and reading lights.Made of polished brass with solid fittings. For wall mounting.Attachment-ready. Cord approx. 150 cm, with cord switch and plug.E27 socket, max: 60W. Light bulb sold separately.The screw-in shade and the swivel arm with large radius and swivel joint allows individual light installation.
Heavy, classic brass light for chart tables and reading areas.Swivelling and telescoping (min. 180/ max. 780mm). Weight 2.35 kg.Attachment-ready, Cord approx. 150 cm, with cord switch and plug.E27 socket, max: 60W. Light bulb sold separately.
This heavy and stable ceiling light is made of cast brass and has a protective brass guard. The cable entry complies to the DIN 89280 regulation. The lamp is painted white on the inside. The bulb is easy to replace, as the protective grid ring can be easily opened via the hinges secured with knurled screws.Lamp holder E27 in brass with porcelain inserts, max 100W. Supplied without bulb. Protection class IP56, weight 5.4kg.
Stainless-steel handle with spring-loaded folding ring. Smooth surface. Brushed finish.
Polished or chromed brass handle for opening ports.The cover snaps in place.Comes with backing plate for 4 mm threaded screws.With deep adjustable bar.
Polished or chromed brass handle for opening ports. The cover snaps in place. Comes with backing plate for 4 mm threaded screws. With deep adjustable bar, as well as a lock and two keys for locking the folding handle.
Polished or chromed brass handle for opening ports. The cover snaps in place. Comes with backing plate for 4 mm threaded screws. With a bar on a threaded shaft for smooth tightening of the lock, as well as a lock and two keys for locking the folding handle.
With retractable knob.The rubber gasket hinders rattling.Polished or chromed brass.
With retracable knob. The rubber gasket hinders rattling. With M4 threads in the housing for invisible mounting from underneath. Available in polished or chromed brass.
Heavy countersunk hook of cast brass with two brass bolts and threaded counterplates. The extracted hook is vertical, so that nothing can fall from the hook when heeling. Available finishes: matt and chromed brass.
