Products from Rule

Rule is a U.S.-based manufacturer of electric bilge pumps and accessories for marine applications. Since the 1950s, the company has been developing pump solutions for recreational and commercial boating. Rule's products are known for their reliability, durability, and performance, and are used worldwide by boat owners and shipyards.

The product range includes:

Automatic bilge pumps: These pumps activate automatically when the bilge water reaches a certain level. They are equipped with integrated float switches and offer flow rates ranging from 500 to 3700 gallons per hour (GPH).
Manual bilge pumps: These pumps are manually activated or operated via an external switch. They are easy to install and suitable for various types of boats. Flow rates vary by model, between 360 and 4000 GPH.
LoPro series: Low-profile bilge pumps designed specifically for tight spaces. They offer flexible installation options and are ideal for boats with limited space.

Float switch RULE-A-MATIC SWITCH 35A

RULE Model No. 35A: This proven and robust floating switch has a high switching power (240 VA) and works for pumps with high initial current. The plastic housing is sonic welded and thus the switch offers a high working security. For 12 - 32 V. Switching capacity: 168 VA.

€59.00 *

Details

RULE LO-PRO Submersible Bilge Pump LP900D / LP900S

Flat, powerful bilge pump for tight spaces with freely adjustable hose outlet (vertical/horizontal) for 3 different hose diameters (19, 25 and 28 mm). All hose nozzles have lip check valves, the motor unit is removable for cleaning, maximum pumping height is 3.4 m.Pumping capacity: 3373 l/h at the same level.2400 l/h at 1 m height difference (1 mWS).Available as standard pump (type LP900D) or as automatic pump (type LP900S) with integrated sensor switch.The sensor has 3 switching modes: in mode "L" the pump switches on at a water height of 33 mm, in mode "H" at 50 mm, in mode "Time" the pump checks every 150 seconds by a short start if water is present and then pumps until the bilge is empty.

From €69.00 *

Details

Submergible bilge pump RULE

Powerful submersible pump from RULE. The pump is made of sturdy plastic and is ideal for smaller boats due to its light and compact nature.The motor is fully enclosed and runs very quietly. The shafts can not rust and are specially sealed against water penetration.The inlet strainer of the pump can be easily removed to clean the pump. The check valve prevents water from flowing back into the bilge, and the ventilated housing optimally prevents air pockets.A thermal shutdown prevents overheating and protects the pump.Also available as RULE AUTOMATIC (RA) automatic pumps. See under similar products.

From €35.90 *

Details

Bilge pump RULE AUTOMATIC

The proven bilgepump from the US manufacturer RULE. Plastic housing with easily removable sieve baseplate. Quiet-running and fully encapsulated motor. Also made as an automatic pump: Type: RULE-AUTOMATIC (RA) works through an automatic microprocessor that checks if there is water in the bilge by briefly running the pump every 150 seconds (without a mechanical switch). Limited power requirements for the test runs: Only approx. 0.2-0.5 Ah per day.

From €135.01 *

Details

Float switch RULE-A-MATIC-PLUS 40A

The floating switch RULE-A-MATIC PLUS 40 allows the automatic switching of a bilgepump.The switch is encapsulated securely in a plastic housing and protected against damage and dirt.Housing L x W x H: 120 x 65 x 70 mm.For 12 - 32 V.Switching capacity: 240 VA max. 20 amps with 12 V.Also available with acoustic alert (please check "Suitable items" below).

€68.50 *

Details

Float switch RULE SUPERSWITCH 37A

RULE Model No. 37A: This proven and robust floating switch has a high switching power (240 VA) and works for pumps with high initial current. The plastic housing is ultrasonic welded and thus the switch offers a high working security. For 12 - 32 V. Switching capacity: 240 VA.

€89.00 *

Details

Bilge pump RULE MATE

The proven automatic bilge pump, from US manufacturer RULE.Plastic housing with easily removable sieve baseplate.Quiet and fully encapsulated motor, stainless axis.Can be used as an automatic pump:Type RULE-MATE (RM) is controlled with an integrated electronic switch. Supplied with straight hose nozzles for 25 and 28 mm.

From €129.00 *

Details

Float switch RULE-A-MATIC-PLUS with alert

The floating switch RULE-A-MATIC-PLUS allows the automatic switching of a bilgepump and the release of the optical/auditory (85 dbA) signal. The switch is encapsulated securely in a plastic housing and protected against damage and dirt. The floating axis is lead out of the housing and allows the simple functioning of the switch. Housing: L x W x H: 120 x 65 x 70 mm. Signal 47 mm.Switching capacity: 240 VA (max. 20 amps with 12 V).

From €139.00 *

Details

3-way panel switch RULE

Brand name three-way switch for bilge pumps with high switching capacity but without a fuse holder. Black coloured stainless steel panel.For on-board voltage of 12 Volt and 24 Volt. For manual pumping the switch has to be pressed from the OFF position to the right (push-button function).

€46.90 *

Details

RULE shower sump

Small plastic tank for collecting waste water from showers or sinks, as part of a waste-water lifting system with floating switch and RULE 500 submersible pump for automatic emptying.The tank holds approx. 7l of waste water, thus it's only intended for small sinks with moderate inflow.Transparent cover for visual inspection, screws off for cleaning .Data:Intake: 38 mmOutlet: 19 mmCurrent: 2.5 A at 12 voltsDimensions: 210 x 240 x 140 mm.

€249.00 *

Details

Manufacturer Navigation

Our brands from A-Z

Products from Rule

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm