Go to homepage
€0.00*
Categories
Jobs
Catalogue
Quick order
Filter products now
from 19 € to 2499 €
from 0.5 L to 5 L
from 22 mm to 195 mm
from 326 mm to 326 mm
from 2630 g to 2630 g
from 1.3 kg to 9 kg
from 40.5 mm to 51.5 mm
Filter products now

Manufacturer Navigation

Our brands from A-Z

Show all

Products from Marco

MARCO S.p.A. is an Italian company based in Castenedolo, Brescia, founded in 1970 by Giovanni Marco Franceschini. The company specializes in the development and manufacturing of signal horns and electric pumps for the automotive and marine sectors.

With a production area exceeding 8,000 square meters, MARCO manufactures electric and air horns for cars, trucks, and boats, as well as electric pumps for transferring various liquids. Production utilizes advanced technologies, including spectrum analyzers, vibration test benches, and anechoic chambers for product development and testing.

Through the use of cutting-edge technologies, MARCO achieves the highest international quality standards. Its products are exported daily to over 80 countries and are recognized for their competitiveness. The company's extensive experience, continuous innovation, and expansion into international markets have established MARCO as a leading manufacturer in its field.

44 products
MARCO float switch AS3
MARCO float switch AS3
Robust bilge switch with high switching capacity for powerful pumps.  Very reliable switching due to a spring-loaded microswitch. Suitable for 12 volts and 24 volts. The switching capacity is maximum 168 VA (14A at 12V, 7A at 24V).The switch turns the pump on at a water level of 51mm and off at a water level of 19mm.

€36.50 *
Details
MARCO float switch AS3
MARCO float switch AS3
MARCO TA1-H Air hand held signal horn
MARCO TA1-H Air hand held signal horn
Compressed-air horn made from plastic.With a very loud approx. 122 dB(A) sound of 400 Hz. Comes with a compressed-aerosole bottle of 200 ml (non-flammable tetrafluoropropene HFO-1234ze, compliant to EU directive No.517 / 2014).Sufficient for approx. 200 signals of 2 seconds.200ml spare bottle replacement available.

€29.95 *
Details
MARCO TA1-H Air hand held signal horn
MARCO TA1-H Air hand held signal horn
MARCO MT1 Electronmagnetic signal horn
MARCO MT1 Electronmagnetic signal horn
Simple electromagnetic horn made of chrome-plated brass.The electromagnetic sound group is carefully protected, made of anti-corrosive material and the chrome plating is resistant to salt. Complete with mounting bracket.Volume 114 dB(A).Optionally with low tone (bass, MT1-L), frequency 410 Hz, orwith high tone (treble, MT1-H), frequency 490 Hz.Can be used as a single horn.Alternatively, the high-frequency horn and the low-frequency horn can be combined to form a double horn.Available for 12 V or 24 V.  Listen to the bass sound here.

From €43.90 *
Details
MARCO MT1 Electronmagnetic signal horn
MARCO MT1 Electronmagnetic signal horn
MARCO MT1 Electronmagnetic signal horn
Bilge pump MARCO
Bilge pump MARCO
High-performance bilge pump, available in various sizes for 12V or 24V systems. Discharge head up to 3 m.The snap-off plastic housing can be opened easily for maintenance and cleaning. Low power requirements.Stainless-steel shaft with a high-quality seal.Built in Italy by MARCO.

From €37.95 *
Details
Bilge pump MARCO
Bilge pump MARCO
Bilge pump MARCO
Bilge pump MARCO
MARCO AT Accumulator Tanks
MARCO AT Accumulator Tanks
Pressure tanks MARCO AT, made from steel, white coated. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER valve to control the pressure.These accumulator tanks generate constant flow to the pressure-water system with limited pumping intervals and power draw.MARCO AT1: Volume 2,0 l. Connection 1/2" BSP.MARCO AT2: Volume 5,0 l. Connection 3/4" BSP.Max. pressure 10 bar.

From €69.90 *
Details
MARCO M1 Compressor
MARCO M1 Compressor
Compact M1 compressor from the Italian manufacturer MARCO. With its 2 bar pressure, the compressor without oiler is suitable for intermittent operation on sound signalling systems.Available for 12 V or 24 V voltage.Delivery rate (volume flow): 60 l/minMotor power: 180 WThreaded connection: BSP 1/4", 6x8 mm air tubeSplash-proof: in accordance with IP67

From €169.00 *
Details
MARCO EW2 Replacement Loudspeaker
MARCO EW2 Replacement Loudspeaker
Acoustic horn / horn loudspeaker for the electronic horn MARCO EW2 (EW2M) and for the identical horn from AQUA SIGNAL.Output: 60 W at 12 V. 8 Ohms.

€548.99 *
Details
MARCO EW2 Replacement Loudspeaker
MARCO EW2 Replacement Loudspeaker
MARCO EW2 Electronic Horn
MARCO EW2 Electronic Horn
Electronic sound signaling system with pressure chamber loudspeaker. The system has an approval for ships up to 20 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.The EW3 sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm) and the control panel.The sound frequency is 675 Hz, the loudness 122 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.  Listen to the sound here.Available for an on-board voltage of 12 volt or 24 volt.Operation:either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),or via a pressure switch (not included).

From €695.00 *
Details
MARCO EW2 Electronic Horn
MARCO EW2 Electronic Horn
MARCO EW2 Electronic Horn
MARCO EW2 Electronic Horn
MARCO EW2 Electronic Horn
Suction pipe for oil change pump
Suction pipe for oil change pump
Accessory for MARCO oil-change gear pumps:The plastic oil-change suction tubes allow a simple vacuum for sucking old oil through the dipstick opening in the engine block.Included: set with two tubes, L = 80cm.Diameter D = 6mm and 8mm.

€19.90 *
Details
Transfer pump set MARCO CK
Transfer pump set MARCO CK
Portable transfer pump set type MARCO CK for mobile use.Complete with metal carrying case with plastic handle.Integrated "on-off" switch, cables with fuse and battery clamps.Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose. Self priming 1,5 m.Comes with transparent plastic filter.

From €199.90 *
Details
MARCO UPE Electronic Pressure Pump
MARCO UPE Electronic Pressure Pump
Gear pump for drinking water with electronic speed control and stepless smooth start-up. Due to the electronic speed control, which adapts to the withdrawal quantity, no pressure fluctuations and pulsation occur in the on-board system.The pump body is made of nickel-plated brass, and the shaft is made of stainless steel.Features:electronic speed control,self-priming, non-dry self-priming,PEEK gears are durable, guarantee high pressure, quiet running and are very temperature resistant,integrated check valve.Multi-voltage capable: Suitable for 12V and 24V.A pressure compensation tank is only required for stiff or short pipes or if electrovalves are used.Connection: BSP female thread, supplied complete with matching stainless steel hose nozzles.Several versions are available:Type UP2/E: 2 taps.Type UP3/E, UP6/E, UP12/E: 3 taps, with pre-filter.Type UP14/E: 3 taps with pre-filter, including control panel PCS .

From €159.00 *
Details
MARCO UPE Electronic Pressure Pump
MARCO UPE Electronic Pressure Pump
MARCO UPE Electronic Pressure Pump
MARCO UPE Electronic Pressure Pump
MARCO UPE Electronic Pressure Pump
MARCO UPE Electronic Pressure Pump
Impeller Pump MARCO UP1
Impeller Pump MARCO UP1
Self-priming electric water pump with with nitrile rubber impeller. The pump body is made of nickel-plated brass. The pump is dry self-priming up to 1.5 m height.The connections have a BSP female thread. A direct hose connection to the connection pieces is also possible.Available in two power ratings for 12 or 24 volts.Also available for 220 volts, see matching items. See similar articles.

From €134.01 *
Details
Impeller Pump MARCO UP1
Impeller Pump MARCO UP1
MARCO ATX Accumulator Tanks
MARCO ATX Accumulator Tanks
Stainless pressure tanks MARCO ATX. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER valve to create the pressure.These accumulator tanks generate constant flow to the pressure-water system with limited pumping intervals and power draw.MARCO ATX1:Volume 0,5 l, Connection 3/8" BSP with stainless  T-connection.MARCO ATX2:Volume 2,0 l, Connection 1/2" BSP with stainless T-connection. Max. pressure of the tanks: 10 bar.

From €76.90 *
Details
MARCO ATX Accumulator Tanks
MARCO ATX Accumulator Tanks
MARCO TCE Electromagnetic Horn
MARCO TCE Electromagnetic Horn
MARCO TCE electromagnetic horn with reduced dimensions but with high sound output. Runs with an acoustic pressure of 114 dB(A) and a frequency of 350 Hz.  Listen to the sound here.A robust construction of trumpet - made of white enamel brass - and body - made of stainless steel.Little energy consumption. Available in 12 Volt or 24 Volt.Dimensions L x D: 250 x 100 mm.

From €89.90 *
Details
MARCO TCE Electromagnetic Horn
MARCO TCE Electromagnetic Horn
MARCO HURRICANE Compressor horn
MARCO HURRICANE Compressor horn
MARCO HR1 HURRICANE built-in electropneumatic horn for boats. Complete system with integrated compressor, with immediate sound output when pressing the push button. Suitable for yachts under 12 meters and as secondary system . The compressor is integrated in the housing, no air tubing is required, the installation is very easy. Plastic housing, bracket of stainless steel, visible grid of plastic.Colour of grid: white or chrome colour.Comes complete with relais, but no switch included.For 12 V or 24 V.Typical marine low frequence sound of 300 Hz, acoustic pressure 120 db(A).NMMA approved. Dimensions: Grid: 185 x 125 corpus 130 mm behind bulkward.

From €64.90 *
Details
MARCO HURRICANE Compressor horn
MARCO HURRICANE Compressor horn
MARCO EW2M Electronic Horn Micro/Amplifier
MARCO EW2M Electronic Horn Micro/Amplifier
Electronic sound signaling system with pressure chamber loudspeaker and microphone for audio announcements. The system has an approval for ships up to 20 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.The EW2M sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm), the control panel and a microphone with talk button.The sound frequency is 675 Hz, the loudness 122 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.  Listen to the sound here.Available for an on-board voltage of 12 volt or 24 volt.Operation:either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),or via a pressure switch (not included).

From €889.00 *
Details
MARCO EW2M Electronic Horn Micro/Amplifier
MARCO EW2M Electronic Horn Micro/Amplifier
MARCO EW2M Electronic Horn Micro/Amplifier
Self-priming gear pump for oil UP3/OIL MARCO
Self-priming gear pump for oil UP3/OIL MARCO
Self-priming (up to 1 m) gear pump for pumping oil and other liquids.Brass pump body with bronze gears.Supplied with two hose nozzles (12 mm), hose clamps and an adapter for plastic pipe (for suctioning used oil through the opening of the dipstick).With the suction pipe set, available separately as an accessory, used oil can be conveniently extracted through the dipstick opening on the engine block when changing the oil.Dimensions: D = 65, L = 140 mm, weight 1.4 kg.Capacity (with suction pipe 6/8/14mm): 20/60/330l/hType UP3/OIL-R is equipped with an integrated changeover switch that enables switching from emptying to filling.Also available as mobile complete kit OCK1 for oil pumping - see similar articles.

From €179.00 *
Details
Self-priming gear pump for oil UP3/OIL MARCO
Self-priming gear pump for oil UP3/OIL MARCO
Self-priming gear pump for oil UP3/OIL MARCO
Oil change kit MARCO OCK1
Oil change kit MARCO OCK1
Oil-change kit OCK1 for mobile use made by renowned pump manufacturer MARCO:Self-priming gear pump UP3/OIL for pumping oil and other liquids.Brass pump body with bronze gears.Comes with 2 hose nozzles (12mm), hose clamps, suction tubes, and an adaptor for the tube.Dimensions L x W x H: 138mm x 108mm x 89mmCapacity (suction pipe/hose diameter 6/8/13mm): 0.3/1/5.5 l/min.With the included suction tubing set, old oil can be removed comfortably through the dipstick hole in the engine block.Ready for attachment with cable and battery clamps, two tubes (6mm und 8mm) with fittings and matching hose nozzles.The pump kit is also available as model OCK1-R with an integrated switch. This reversible UP3/OIL-R pump may be used for filling and draining.Dimensions L x W x H: 180mm x 108mm x 89mm

From €169.00 *
Details
Oil change kit MARCO OCK1
Oil change kit MARCO OCK1
Oil change kit MARCO OCK1
Oil change kit MARCO OCK1
Bronze Gear transfer pump MARCO UP3
Bronze Gear transfer pump MARCO UP3
Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €164.90 *
Details
Bronze Gear transfer pump MARCO UP3
Bronze Gear transfer pump MARCO UP3
Impeller for impellerpump MARCO UP1
Impeller for impellerpump MARCO UP1
Impeller of special nitril rubber. Original spare part for UP1, UP1-M and UP1/AC MARCO Pumps.Dimensions hight x Ø: 22 x 51.5 mm.Bore Ø: 8 mm.

€32.90 *
Details
Impeller for impellerpump MARCO UP1-J
Impeller for impellerpump MARCO UP1-J
Impeller IMP2 of special nitril rubber. Original spare part for UP1-J and UP1-JR MARCO pumps.Dimensions hight x Ø: 22 x 40.5 mm.Bore Ø: 8 mm.

€32.90 *
Details
Impeller pump with reverse switch MARCO UP1-JR
Impeller pump with reverse switch MARCO UP1-JR
This universal feed pump for freshwater and seawater has a hard-wearing impeller made of nitrile rubber. The motor is equipped with an integrated waterproof switch with three positions (forward/off/reverse) so that the flow direction can be changed.This compact design makes the impeller pump ideal for transferring water or grey water, as well as for emptying bilges and grey water. The pump body is made of nickel-plated brass and the impeller is made of hard-wearing nitrile rubber. The pump is dry self-priming up to a height of 1.5 metres. The connecting pieces allow direct hose connection, but also have BSP internal threads, so that connection with appropriate fittings is also possible.Available in two performance levels for 12 over 24 volts.You can find other MARCO pumps in the UP1 series under the "Similar products" tab.

From €149.00 *
Details
Impeller pump with reverse switch MARCO UP1-JR
Impeller pump with reverse switch MARCO UP1-JR
MARCO TC1/P Electromagnetic horn
MARCO TC1/P Electromagnetic horn
MARCO TC1/P small electropneumatic horn (250 x 100 mm) with high sound output. Works with an acoustic pressure of 116 dB(A) and a frequency of 420 Hz.  Listen to the sound here.Body made of white ABS plastic.Comes complete with electric compressor, tubing (120 cm) and mounting kit.Available for 12 Volt or 24 Volt.

From €57.91 *
Details
MARCO TC1/P Electromagnetic horn
MARCO TC1/P Electromagnetic horn
MARCO EM2 Signal horn stainless steel
MARCO EM2 Signal horn stainless steel
Unpressurized electric horn with electromagnetic sound generation. Stainless steel horn.Volume 118 dB (A), frequency 370 Hz.  Listen to the sound here.

From €99.90 *
Details
MARCO EM2 Signal horn stainless steel
MARCO EM2 Signal horn stainless steel
MARCO EM2 Signal horn stainless steel