Stainless Steel Wind Indicator Holder for 4 mm Diameter Rod

Practical wind indicator for the VHF antenna, suitable for all 2,5mm stainless steel rod antennae.Easy to mount, with adjustable angular arms, 380 mm pointer length.Delivery without VHF antenna.

As it was common on yachts in earlier times: Pennant stick of varnished pine with stainless steel wind indicator epoxied on top.The pennant pole is raised upright on a separate halyard. That way the wind indicator reaches well above the top of the mast. When cruising the club pennant will naturally be attached to the pole, when racing it will be replaced by the square race pennant.Measurements:Total length, including wind indicator: 190 cm. Pennant size: 150 x 190 mm.

Mast fly for Optimist rigg (OPTIMAX, OPTIPARTS).Red plastic wind indicator. Indicator pole of anodised aluminium (5 mm shaft), which fits all common top pins (pennant holders).

Replacement bulb for the older WINDEX 12V lighting unit. 

Tell tales help with the optimal sail trim - a must-have for every ambitious sailor.Supplied in a set of wool threads or of spinnaker cloth stripes made from super-light ripstop Nylon, each in two different colours.Simple fitting with self adhesive pads, suitable for main and foresails.

Can be easily fitted on either the shrouds or the backstay on eye level.For shroud diameter of 3 - 5 mm, UV resistant wind vane made from plastic, top-quality bearing, adjustable counter weight.Shipping in the colours red or green.

Mast fly for Optimist rigg (OPTIMAX, OPTIPARTS).Red PVC flag. Indicator pole of anodised aluminium (5 mm shaft), which fits all common top pins (pennant holders).Optional mast fitting of stainless steel is available.

Standard mast fly with red nylon cloth flag. Indicator pole and locking mechanism made of stainless steel. The large windindicator version is also available with a small corrector weight, for better display accuracy when heeling.Spare flags and mast fittings are available.

The original from NIRO-PETERSEN, made of stainless steel built in Flensburg, Germany. Ball-bearing wind indicator, arrow with reflective film.Reflective tacking tabsIndicator arrow length 370 mm, mounting bar length 330 mm. Mounts with threads (M8). Measurements of angular base: 46 x 20 x 27 mm.

Original spare parts for the WINDEX 10 wind indicator.

The original from Sweden: Wind direction indicator WINDEX 10 C is used for the precise display of the apparent wind direction on board and is designed for sailboats between 3–6 meters (10–20 feet) in length. The construction consists of a UV-resistant plastic needle with a smooth-running vane and two adjustable tacking tabs for optimal trim assistance. The high-quality sapphire bearing ensures low-friction movement even in light wind conditions. Thanks to the reflector tape on the underside of the vane and the tacking tabs, the WINDEX 10 is easy to read both during the day and at night. It is mounted using the included bracket, which allows the wind indicator to be attached on top of or to the side of the mast.WINDEX vanes are robust due to their high-quality construction and can be used for several years if installed correctly. They have been tested in a wind tunnel at wind speeds of 40 m/s and remain among the internationally leading wind indicators in the cruising and racing sectors.Technical DataModel: WINDEX 10 CApplication range: Sailboats from 3-6 m in lengthMaterial: UV-resistant plastic, aluminumVane length: approx. 250 mmFeatures: Adjustable tacking tabs, mounting bracket for top or side mounting

The WINDEX 15 / 15 MK2 is used to precisely display the apparent wind direction on board and is designed for sailboats from 5-12 meters (14-40 feet) in length. The construction consists of a needle made of UV-resistant plastic with a smooth-running wind vane and two adjustable tabs for optimum trimming assistance. The included BirdSpike extends the Windex by 190 mm above the vane and prevents birds from perching on it.The high-quality sapphire bearing ensures low-friction movement of the needle, even in light wind conditions. Thanks to the reflective tape on the underside of the wind vane and the small plates, the WINDEX 15 is easy to read during the day and at night. The wind indicator is mounted using the bracket supplied, which allows it to be attached to the top or side of the mast.WINDEX wind vanes are characterized by their high-quality construction and can be used for several years if installed correctly. They have been tested in the wind tunnel at wind speeds of 40 m/s and are still among the leading international wind indicators in the cruising and regatta sector.WINDEX 15 MK2 model: Super-light carbon mast with UNIFIX holder for top or side mounting, comes with BIRDSPIKE (prevents birds from landing).Model WINDEX 15 B: similar to the previous model WINDEX 15, with black painted aluminum mast and mounting base with Ø 8mm thread for top mounting.

Original spare parts for the WINDEX 15 wind indicator. With the exception of the aluminum rod Art. no. 1088-122 (suitable for WINDEX 15, 15B), the spare parts fit all variants of type 15.

Birds like to settle on the larger WINDEX in particular, which can impair the function of the wind indicator. To counteract this problem, there is the WINDEX BirdSpike. It is easy to screw on and effectively prevents birds from landing on the wind indicator. Only suitable for the WINDEX 15 model &nbsp

The WINDEX DINGHY 6 is a compact wind direction indicator for smaller dinghies, dinghies and multihulls. With its small size and lightweight design, it is particularly suitable for boats where there is little space for masthead mounting. The wind indicator is equipped with a precisely balanced wind vane and a low-friction sapphire bearing, which enables a clear display even in light winds.It can be mounted at any height on masts or bowsprits with a diameter of 45-70 mm using a rubber cable bracket. It can be mounted horizontally or vertically and the WINDEX 6 can be removed again very quickly after use.

The WINDEX LED light is a lighting unit designed to be combined with the WINDEX 10, WINDEX 15, and WINDEX XL wind direction indicators. It enables safe readability of the wind direction even at night or in poor visibility conditions. The compact module is mounted below the wind indicator and illuminates the wind vane and the tabs from below with a wide, even beam of light.Technical DataCompatibility: WINDEX 10, 15, XLVoltage: 12-24 V DCMaterial: seawater-resistant plasticLighting: LEDPower consumption: 23 mACable length: approx. 1 m

The WINDEX XL is suitable for cruising yachts from a length of 12 meters (40 feet) and provides precise indication of the apparent wind direction on board. The construction consists of a needle made of UV-resistant plastic with a smoothly rotating wind vane and two adjustable riders for optimal trim assistance. The high-quality sapphire bearing ensures low-friction movement of the needle, even in light wind conditions. Thanks to the reflector tape on the underside of the wind vane and the plates, the WINDEX XL is easy to read both during the day and at night. WINDEX wind vanes are characterized by their high-quality construction and can be used for several years if installed correctly. They have been tested in wind tunnels at wind speeds of 40 m/s and remain among the leading wind indicators worldwide in both cruising and racing sectors.Installation: The mount features a 5/16" thread. Alternatively, the Windex can be attached via an 8 mm drilled hole using a nut and washer. Technical DataModel: WINDEX XLApplication area: Sailing yachts from 12 m lengthMaterial: UV-resistant plastic, aluminumWind vane length: approx. 584 mmHeight: 570 mmWeight: 150 g 

The drogue is made from sturdy Nylon with good tensile strength. A solid plastic ring is incorporated at the end of the air sleeve, mostly preventing it from getting caught and prolonging the life span. It is in use at air ports, bridges, yacht harbours, cable railways, etc. The windsock is envisaged for use with an air sleeve cage, which must be ordered separately. Colour: red white.

Support frame for windsocks with a diameter of 30 cm or 40 cm. They allow a free flow and reliable alignment of the windsock to the wind direction thanks to an integrated rotating mechanism. The construction is designed for permanent outdoor use and is suitable for airfields as well as for technical applications, for example in industrial plants or at fire department and disaster control sites.The baskets are made of galvanized steel components and are therefore permanently protected against corrosion. An integrated bearing with ball and plain bearings ensures smooth and quiet rotation. The windsock frame is firmly welded and ready to install. The windsock pole has a diameter of 16 mm and has holes for attachment to a windsock pole.This is not included in the scope of delivery and must therefore be procured on site.