Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Waste water pump JABSCO 50890

4610*07 Fäkalienpumpe JABSCO 50890

from €339.00*

€339.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 - 0 Tage

In stock

model
voltage (V)
current (A)
capacity
for tube-Ø (mm)
Stk

Robust diaphragm pump for extracting sewage from the pump specialist JABSCO. Dry self-priming up to 3.0 m. Full passage due to the use of lip valves. Universal and flexible installation, as both the pump head and the hose direction can be adjusted as required.

Dimensions L x W x H: 278 x 161 x 132 mm. Available for 12 V or 24 V.

more information
Show 2 articles
📖 View article in the TOPLICHT catalogue


Downloads

Robust diaphragm pump for extracting sewage from the pump specialist JABSCO. Dry self-priming up to 3.0 m. Full passage due to the use of lip valves. Universal and flexible installation, as both the pump head and the hose direction can be adjusted as required.

Dimensions L x W x H: 278 x 161 x 132 mm. Available for 12 V or 24 V.

Questions about the product?

Accessories

Waste hose
Waste hose
Thick-walled, white waste-water hose of PVC with integrated plastic spiral.Formulated for exceptional odor containment, made in Germany, very flexible, does not kink.

From €6.40 *
Details
Waste hose SPECIAL
Waste hose SPECIAL
Absolutely odor-tight wastewater hose with incorporated steel coil.Three-layer construction: White CR rubber outside, textile fabric intermediate layer with spiral, black smooth EPDM rubber inside. The hose is designed for a working pressure of 6 bar and is temperdature resistand from -35°C to +135°C.

From €24.90 *
Details
Hose clamp stainless steel
Hose clamp stainless steel
Solid A2 design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.Wide 12.5 mm (US 8 mm).

From €1.80 *
Details
T-bolt clamp
T-bolt clamp
Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY. Band width 22mm.

From €5.90 *
Details

Similar products

RHEINSTROM waste water pump type M
RHEINSTROM waste water pump type M
The sewage pump RHEINSTROM M is a self-priming diaphragm pump with bronze housing. Even bigger solids can be conveyed without damaging the pump because of the lip valves which have been installed. The self-locking valves make the pump non-reactive, i.e. it can be mounted to the side standing, hanging or sideways.Technical data:Output: 20 l / minHead: 8 mSuction height: 5 mSuction and pressure connection: 1 ½"Connection: 38 mm hoseWeight: 12 kg.

From €1,089.00 *
Details
Waste pump WHALE GULPER
Waste pump WHALE GULPER
Membrane pump for emptying holding tanks.^ Protected against dry-running, self-priming to 3 m, discharge height max. 4 m. Low power draw; 2.5 A (at 12 V)Inlet hose attachments on both sides 38 mm. Dimensions: 340 x 300 x 120 mm. Weight 2.2 kg.

From €499.00 *
Details
Waste mercerator pump
Waste mercerator pump
High performance mercerator pump especially for sanitation waste.Pump head of black plastic or bronze.Self-priming up to 1,5 m.Attachments:Inlet for hose 38 mm,Pressure-side for hose 25 mm.Dimensions: 240 x 130 x 90 mm.

From €139.00 *
Details
Macerator pump JABSCO
Macerator pump JABSCO
The perfect solution, for example, for emptying a waste water tank.Dry self-priming impeller pump with nitrile impeller and built-in stainless steel cutting wheel as chopper.Suction lift to 1.2 m, pump power max. 2700 l/h.Special feature: The pump works with a patented dry-running protection: when it runs dry, it immediately switches off, thereby hindering damage to the impeller.New activation of the pump through switching it off and on. Attachments:Inlet-1-1/2" (38 mm) Hose Barb and1-1/2" N.P.T. (Male). Outlet-1" (25 mm) Hose Barb. Dimensions: 286 x 106 x 92 mm.

From €359.00 *
Details
Grey water and bilge diaphragm pump JABSCO 50880
Grey water and bilge diaphragm pump JABSCO 50880
A new generation of diaphragm pump in the one compartment design by pump specialist JABSCO.Ideal for the draining of shallow bilges and shower drains.Maintanance is simplified by the filterless design and the pump is indeed free of clogging.Characteristics:Flow rate: Nominal 16 Litres/min. Self-priming from dry up to 3m (10ft) Flexible installation Dry running capability

From €209.90 *
Details
Fresh and waste water tank
Fresh and waste water tank
Solid wastewater tanks of thick-walled PE plastic (polyethylene). Dark blue colour.The tanks have multiple connection possibilities for filling, emptying and venting. There exist numerous blind stub pipes with inner threads. Please find those in the PDF data sheets under "Downloads & Information".A non-projecting inspection cover is placed on the top enabling a space-saving installation.

From €89.00 *
Details
Diverter valve WHALE
Diverter valve WHALE
Very sturdy plastic T-valve from the manufacturer WHALE. Intented for blackwater, waste water and bilge water systems. (Bilge pump distribution, tank switching, etc.)Possible lever positions:- left outlet open- right outlet open- both outlets closed

From €119.90 *
Details

Last seen products