Rubber sealing plug with swivel pin from stainless steel
Rubber plug with ring handle. Ring and pivot made from A4 stainless steel (AISI 316), suitable for use as a drain plug or pipe plug.
With a black rubber expansion ring.
from €21.90*
€21.90
Prices incl. VAT plus shipping costs
| Art. No. | model | Size (mm) | size (Zoll) | Range | Unit price | Delivery time | Note list | Buy |
|---|
Description
Rubber plug with ring handle. Ring and pivot made from A4 stainless steel (AISI 316), suitable for use as a drain plug or pipe plug.
With a black rubber expansion ring.
Brass sealing plug for use as a bail plug. The stopper closes very tightly due to the lever and the sturdy rubber expansion ring.The expansion ring has a diameter of 22 or 25 mm.
Plug with enlargeable diameter, made of NBR rubber and galvanized steel.The diameter can be adjusted using the large wing nut. The threaded rod provides a flow or drainage option - the cover is unscrewed for this purpose. Exception: The smallest plug 6330-025 has no passage for draining.Technical featuresApplication range of the NBR rubber: -30 to +120 °CResistant to mineral oil products with an aromatic content of up to 50%Resistant to aromatic and chlorinated hydrocarbons and solventsResistant to oil and grease-resistant foodstuffsNot permanently resistant to solar radiationScupper plugs are used to temporarily seal open scuppers to prevent the uncontrolled flow or ingress of liquids. They are used in particular when liquids - such as oil - need to be retained and collected during work on board or in the event of leaks. Thanks to their precisely fitting design, scupper plugs can be inserted quickly and tightly into the openings and removed just as easily. As well as being used on tankers, they can also be used for maintenance work, accidents or for shutting off pipes and drains.
The STA-PLUG is a timely solution for such emergencies as leaks and water breaches in a variety of boat types. The plug, from the manufacturer FORESPAR, is specially developed of soft flexible material in the shape of a cone, so that it can fit in the most unusual hull breaches after the motto "insert, push & twist". Whether it's a round hole due to a mechanical failure or a crack in the hull, the STA-PLUG fits the shape of the leak. Unlike classic wooden plugs, the soft cone can be squeezed together by hand or cut into a shape that fits the hole to stop the water flow.Dimensions: height 230 mm, largest diameter 120 mm.STA-PLUG does not guarantee to stop all leaks. It is meant to be one of the safety means on board besides others (like a bilge pump of sufficient dimension). Not to be used for leaks in the fuel system.
Cockpit drain with hose attachment.Made from brass, with flat abutting face.Inox spiral strainer is easy to remove, also available as spare part.
Lead-through to countersink made from brass. With 10 mm hose nipple. Perfectly suited to drain off small amounts of remaining water, for instance from locker seats, anchor locker, cockpit seats, etc. For wall thickness of up to 20 mm, a bore hole of 13 mm is needed. Surface brass or chromed.
Very robust, thick-walled drain plug made of cast bronze with a large base plate and a leather sealing washer.The screw plug has a sturdy handle and an extra-long threaded piece with a hollow hole as a drain hole. The drain hole allows water to drain without having to unscrew the screw completely.
Massive cockpit scupper with return stop made from bronze: the floating ball inside the casting prevents the water from the outside to enter.The size of the drain nevertheless provides a speedy drainage of the cockpit.The sieve is only screwed in, thereby allowing easy cleaning access.A taper pipe thread of 1 1/4" provides for an individual hookup.
Strong screw-in plug for mounting in the transom (from the outside) or from the inside. Brass, rolled or chromed finish. Hexagonal flange with backing flange and seal. The plug is secured against loss.
Very robust, thick-walled, polished-brass drain plug.This drain plug is screwed through the outer wall with a long flange and nut and can also be used as a through-hull fitting.Screw plug with strong handle and long threaded piece.
Brass drain plugs with flat flanges and even nozzle.These plugs can be mounted in the transom or outer hull, in order to allow bilgewater to run out (when pulled).Other installations are possible.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Polished brass drain plug. These drain plugs have long flanges and locknuts for screwing them through the outer hull.
Drain plug of oval shape made completely from stainless steel with O-ring sealing.
Functional screw-in plug. Flange and drain plug of white nylon. The screw is most commonly mounted in the transom from the outside, to drain bilge or cockpit water.
Andersen bailers are recognised by sailors around the world as the most efficient and reliable self-draining valves on the market. When closed, they seal flush with the outside of the hull and keep the boat watertight, as soon as they are opened while sailing, they create a venturi effect that quickly and automatically draws the accumulated water out of the boat.Andersen bailers are made from high quality stainless steel and are designed to give years of trouble-free service.The origins of the Andersen bailer go back to the legendary Danish regatta sailor Paul Elvström, who won four Olympic gold medals and made a lasting impact on the sport as an innovator.The bailers are available in various sizes for indoor or outdoor installation.An installation template is included as well as the fixing screws and a rubber seal for the internal installation models.
Drain plug with flat brass flange, rolled or chromed finish, with plug of black nylon.
Brass sealing plug for use as a bail plug. The stopper closes very tightly due to the lever and the sturdy rubber expansion ring.The expansion ring has a diameter of 22 or 25 mm.
Rubber plug with ring handle. Ring and pivot made from A4 stainless steel (AISI 316), suitable for use as a drain plug or pipe plug.With a black rubber expansion ring.
