Scupper Plugs

Art. No.	Size (mm)	size (Zoll)	Range	Price (unit)	Delivery time	Note list	Buy

Description

Scupper plugs are used to temporarily seal open scuppers in order to prevent the uncontrolled outflow or ingress of liquids. They are particularly useful in situations where fluids - such as oil - need to be contained and collected during operations or in the event of leaks on board. Designed for a tight fit, scupper plugs can be quickly and securely inserted into scupper openings and easily removed when needed. In addition to their use on tankers, they are also suitable for maintenance work, emergency response, or for temporarily sealing pipes and drains.

Plugs with adjustable width, made of NBR rubber and galvanised steel.
Large wing nut for adjusting the diameter, with flow-through option thanks to unscrewable cover. Exception: The smallest plug 6330-025 has no passage.

Properties of the NBR rubber

Maximum temperature: -30°C +120°C

Resistant to:
- Mineral oil products with an aromatic content of up to 50
- Aromatic and chlorinated hydrocarbons and solvents
- Oil and grease-resistant foodstuffs

Not resistant to:
- Solar radiation

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Rubber sealing plug with brass lever

Brass sealing plug for use as a bail plug. The stopper closes very tightly due to the lever and the sturdy rubber expansion ring.The expansion ring has a diameter of 22 or 25 mm.

From €13.95 *

Details

Wood plugs

One common reason for water intrusion onboard are broken hose connections at the sea cocks.Our soft-wood plugs can be easily tumbled in and stop the water. The set is made up of plugs in graded diameters. Lengths between 40 and 110 mm.

From €9.90 *

Details

Oil absorbent cloth ÖCUSORB

These OECUSORB oil-absorbant cloths are made from polypropylene and can absorb up to 25 times their weight in oil and other organic liquids.Simple to handle, hydrophobic, floating, reusable and easy to dispose of. The cloths are ideal for soaking up oil from the bilges of small boats, but are also useful for many other tasks: protection of areas where oil or fuel could spill (for example, deck fills when fueling), water-polution control, cleaning motors and winches, etc.Comes as a cloth, dimensions 33 x 33 cm, weight approx. 30 g.

€1.80 *

Details

Oil sorbent cloth ÖCUSORB

OECUSORB polypropylene oil-absorbant pads.The filling of these pads can absorb up to 25 times its weight in oil and other organic liquids.Simple to handle, hydrophobic, floating, reusable and easy to dispose of.This material is ideal for soaking up oil from the bilge, but also for many other tasks: protection of areas where oil or fuel could spill (for example, deck fills when fueling), water-polution control, cleaning machines, etc.The braided absorbent material is a plastic net bound on both sides with attachment loops; multiple pads can be connected to create an oil barrier.Dimensions: Length, approx. 60 cm; diameter, approx. 20 cm; weight, approx. 400 g.

€28.00 *

Details

More Products from Category Leakage and scupper plugs

LEAK HERO mastic leak sealant YACHTCARE

LEAK HERO is a mastic sealant for closing leaks in case of emergency.The wax-like material comes in a plastic container and is ready for use. It is easily applied to or stuffed into the leak directly from the container.Sticks strongly to most surfaces, also in wet surrounding and under water.Perfect material to stop water leaking into holes in the hull, plank seams, faulty through-hulls ...Should be carried in each emergency toolbox on board.Only for emergencies! Later the leak must be repaired professionally. - Closes a leakage in seconds - Cures leaks in case of emergency - Easy to use - ready for use - Sticks to wet surfaces.For each container sold 1 Euro is donated to German Lifeboat Association (DGzRS).Container with 625 ml.

€35.50 *

Details

Scupper Plugs

Scupper plugs are used to temporarily seal open scuppers in order to prevent the uncontrolled outflow or ingress of liquids. They are particularly useful in situations where fluids - such as oil - need to be contained and collected during operations or in the event of leaks on board. Designed for a tight fit, scupper plugs can be quickly and securely inserted into scupper openings and easily removed when needed. In addition to their use on tankers, they are also suitable for maintenance work, emergency response, or for temporarily sealing pipes and drains.Plugs with adjustable width, made of NBR rubber and galvanised steel.Large wing nut for adjusting the diameter, with flow-through option thanks to unscrewable cover. Exception: The smallest plug 6330-025 has no passage.Properties of the NBR rubberMaximum temperature: -30°C +120°CResistant to:- Mineral oil products with an aromatic content of up to 50- Aromatic and chlorinated hydrocarbons and solvents- Oil and grease-resistant foodstuffsNot resistant to:- Solar radiation

From €34.00 *

Details

SEACURITY Leak protection disc

With the red silicone disk, leaks between 6 and 20 cm in size can be sealed quickly and easily.The silicone disk with a diameter of 26 cm is inserted through the leak from the inside to the outside with its soft grip-coated stainless steel handle. The water pressure presses the disk into place.The five-meter-long tensioning strap can be used to lash the leak protection washer inside the yacht so that it is securely fixed in position. Alternatively / additionally, a piece of wood can be passed through the U-nut at the end of the handle and clamped.The bow nut at the end of the handle is also made of stainless steel.

€74.90 *

Details

STA-PLUG Emergency plug

The STA-PLUG is a timely solution for such emergencies as leaks and water breaches in a variety of boat types. The plug, from the manufacturer FORESPAR, is specially developed of soft flexible material in the shape of a cone, so that it can fit in the most unusual hull breaches after the motto "insert, push & twist". Whether it's a round hole due to a mechanical failure or a crack in the hull, the STA-PLUG fits the shape of the leak. Unlike classic wooden plugs, the soft cone can be squeezed together by hand or cut into a shape that fits the hole to stop the water flow.Dimensions: height 230 mm, largest diameter 120 mm.STA-PLUG does not guarantee to stop all leaks. It is meant to be one of the safety means on board besides others (like a bilge pump of sufficient dimension). Not to be used for leaks in the fuel system.

From €23.90 *

Details

Wood plugs

One common reason for water intrusion onboard are broken hose connections at the sea cocks.Our soft-wood plugs can be easily tumbled in and stop the water. The set is made up of plugs in graded diameters. Lengths between 40 and 110 mm.

From €9.90 *

Details

Description

More Products from Category Leakage and scupper plugs

Last seen products

Customer Reviews