Go to homepage
€0.00*
Jobs
Catalogue
Quick order
4330*09 Verschlusstopfen mit Hebel 4330*09 Verschlusstopfen mit Hebel
4330-222 Verschlusstopfen mit Hebel 4330-222 Verschlusstopfen mit Hebel
4330-222 Verschlusstopfen mit Hebel 4330-222 Verschlusstopfen mit Hebel
4330-722 und 4330-725 Verschlusstopfen mit Hebel 4330-722 und 4330-725 Verschlusstopfen mit Hebel
4330*09 Verschlusstopfen mit Hebel
4330-222 Verschlusstopfen mit Hebel
4330-222 Verschlusstopfen mit Hebel
4330-722 und 4330-725 Verschlusstopfen mit Hebel

Brass sealing plug for use as a bail plug. The stopper closes very tightly due to the lever and the sturdy rubber expansion ring.

The expansion ring has a diameter of 22 or 25 mm.

from €13.95*

€13.95*

Prices incl. VAT plus shipping costs

version
D (mm)
D (Zoll)
pcs
View article in the TOPLICHT catalogue

Description

Brass sealing plug for use as a bail plug. The stopper closes very tightly due to the lever and the sturdy rubber expansion ring.

The expansion ring has a diameter of 22 or 25 mm.

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
4330*08 Gummi-Verschlussstopfen mit Drehachse aus A4-Edelstahl - Bild 1
Rubber sealing plug with swivel pin from stainless steel
Rubber plug with ring handle. Ring and pivot made from A4 stainless steel (AISI 316), suitable for use as a drain plug or pipe plug.With a black rubber expansion ring.

From €21.90 *
Details
6330*01 Speigattstopfen
Scupper Plugs
Plugs with adjustable width, made of NBR rubber and galvanised steel.Large wing nut for adjusting the diameter, with flow-through option thanks to unscrewable cover. Exception: The smallest plug 6330-025 has no passage.Properties of the NBR rubberMaximum temperature: -30°C +120°CResistant to:- Mineral oil products with an aromatic content of up to 50- Aromatic and chlorinated hydrocarbons and solvents- Oil and grease-resistant foodstuffsNot resistant to:- Solar radiationScupper plugs are used to temporarily seal open scuppers in order to prevent the uncontrolled outflow or ingress of liquids. They are particularly useful in situations where fluids - such as oil - need to be contained and collected during operations or in the event of leaks on board. Designed for a tight fit, scupper plugs can be quickly and securely inserted into scupper openings and easily removed when needed. In addition to their use on tankers, they are also suitable for maintenance work, emergency response, or for temporarily sealing pipes and drains.

From €34.00 *
Details

More Products from Category Draining plugs & cockpit drains

1901*01 Cockpitabfluss Messing - Bild 1
Brass cockpit drain
Cockpit drain with hose attachment.Made from brass, with flat abutting face.Inox spiral strainer is easy to remove, also available as spare part.

From €19.50 *
Details
1901*02 Backskistenabfluss aus Messing - Bild 1
Brass locker seat drain
Lead-through to countersink made from brass. With 10 mm hose nipple. Perfectly suited to drain off small amounts of remaining water, for instance from locker seats, anchor locker, cockpit seats, etc. For wall thickness of up to 20 mm, a bore hole of 13 mm is needed. Surface brass or chromed.

From €10.90 *
Details
4331*01 Lenzstopfen DAVEY Bronze
Bronze drain plug DAVEY
Very robust, thick-walled drain plug made of cast bronze with a large base plate and a leather sealing washer.The screw plug has a sturdy handle and an extra-long threaded piece with a hollow hole as a drain hole. The drain hole allows water to drain without having to unscrew the screw completely.

From €44.90 *
Details
6288*01 Cockpitlenzer aus Bronze mit Schwimmerkugel - Bild 1
Cockpit drain made from bronze
Massive cockpit scupper with return stop made from bronze: the floating ball inside the casting prevents the water from the outside to enter.The size of the drain nevertheless provides a speedy drainage of the cockpit.The sieve is only screwed in, thereby allowing easy cleaning access.A taper pipe thread of 1 1/4" provides for an individual hookup.

€258.00 *
Details
4330*06 Lenzstopfen sechseckig - Bild 1
Drain plug
Strong screw-in plug for mounting in the transom (from the outside) or from the inside. Brass, rolled or chromed finish. Hexagonal flange with backing flange and seal. The plug is secured against loss.

From €46.90 *
Details
4330*07 Lenzstopfen/Borddurchführung aus Messing - Bild 1
Drain plug / through-hull
Very robust, thick-walled, polished-brass drain plug.This drain plug is screwed through the outer wall with a long flange and nut and can also be used as a through-hull fitting.Screw plug with strong handle and long threaded piece.

From €16.90 *
Details
4330*01 Lenzstopfen Messing rund
Drain plug brass
Brass drain plugs with flat flanges and even nozzle.These plugs can be mounted in the transom or outer hull, in order to allow bilgewater to run out (when pulled).Other installations are possible.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €18.50 *
Details
4330*03 Lenzstopfen Messing rund mit langem Flansch - Bild 1
Drain plug brass long flange
Polished brass drain plug. These drain plugs have long flanges and locknuts for screwing them through the outer hull.

€18.90 *
Details
4330*10 Lenzstopfen aus Edelstahl-Guss - Bild 1
Drain plug from stainless steel
Drain plug of oval shape made completely from stainless steel with O-ring sealing.

€20.90 *
Details
4330*04 Lenzstopfen aus Nylon
Drain plug nylon
Functional screw-in plug. Flange and drain plug of white nylon. The screw is most commonly mounted in the transom from the outside, to drain bilge or cockpit water.

€9.90 *
Details
ELVSTRÖM Lenzer
ELVSTRÖM bailer
Andersen bailers are recognised by sailors around the world as the most efficient and reliable self-draining valves on the market. When closed, they seal flush with the outside of the hull and keep the boat watertight, as soon as they are opened while sailing, they create a venturi effect that quickly and automatically draws the accumulated water out of the boat.Andersen bailers are made from high quality stainless steel and are designed to give years of trouble-free service.The origins of the Andersen bailer go back to the legendary Danish regatta sailor Paul Elvström, who won four Olympic gold medals and made a lasting impact on the sport as an innovator.The bailers are available in various sizes for indoor or outdoor installation.An installation template is included as well as the fixing screws and a rubber seal for the internal installation models.

From €69.00 *
Details
4330*05 Lenzstopfen Nylon mit Messingflansch - Bild 1
Nylon drain plug with brass flange
Drain plug with flat brass flange, rolled or chromed finish, with plug of black nylon.

From €8.40 *
Details
4330*09 Verschlusstopfen mit Hebel
Rubber sealing plug with brass lever
Brass sealing plug for use as a bail plug. The stopper closes very tightly due to the lever and the sturdy rubber expansion ring.The expansion ring has a diameter of 22 or 25 mm.

From €13.95 *
Details
4330*08 Gummi-Verschlussstopfen mit Drehachse aus A4-Edelstahl - Bild 1
Rubber sealing plug with swivel pin from stainless steel
Rubber plug with ring handle. Ring and pivot made from A4 stainless steel (AISI 316), suitable for use as a drain plug or pipe plug.With a black rubber expansion ring.

From €21.90 *
Details

Last seen products