SIKA 208 Remover

SIKA Multiprimer Marine is used to improve the adhesion between Sikaflex adhesives and the various substrates such as woods like teak (for teak deck application), mahogany, oregon pine and cork, metals like aluminium and galvanized steel, paint-primed substrates, GRP and other plastics.

Sika Primer 209D is a black, moisture-curing low viscous primer specifically formulated for the treatment of painted surfaces, plastics or acrylic glass. Product Safety: For this product the hazard pictograms and signal words shown above apply, as well as the following hazard statements: H225, H317, H319, H334, H336/a>.

Cleaner for preparation of a surface for the application of a primer. To improve the adhesion properties we recommend the application of a special SIKA primer.

Universal sealing compound for sealing, caulking, isolate. SIKAFLEX products are high-quality, 1-part adhesives and sealants in a polyurethane base. Through the absorbtion of moisture the plastic sealing compound becomes a high-quality elastomer.Product features:seawater-proof,high strength (40í Shore A hardness, 1.8 N/mm.sq. tensile strength),weather-resistant,permanently elastic,resistant to aging,sandable,UV-resistant, not corrosive.Colors: black, brown, grey or white.Available in a small pouch tube (70 ml), in a cartridge for cartridge guns (300 ml) or packs for use in a pack gun (600 ml).We exclusively carry the products of the SIKAFLEX Blue MarineLine, which have been specially developed for marine use. They stand out for their wide range of adhesiveness and can be applied to all boatbuilding materials.All products are wheelmark certified (by Lloyds Register, DetNorske Veritas, RINA, Germanischer Lloyd, American Bureau of Shipping).SIKA's i-Cure technology allows to produce without MDI.

The deck joint sealant for professionals in yacht and shipbuilding. Particularly UV and seawater resistant one-component product based on polyurethane, specially developed for grouting teak decks.Easy to apply due to optimum flow properties and long smoothing time. SIKAFLEX-290 DC PRO is characterized by a good curing speed and can be sanded very well after curing.Further product features: - high strength (40° Shore A hardness, 3 N/mm tensile strength), - permanently elastic, - elongation at break approx. 600%, - silicone-free, - very good weather resistance, - non-corrosive, - can be painted over with 2-component paints. - Color: black. Available as a 300 ml cartridge or 600 ml bag for application in a bag gun, consumption example: 300 ml is sufficient for 10 linear meters for a 5x5 mm joint. SIKAFLEX-290 DC PRO is Wheel-Mark certified and meets the requirements of the International Maritime Organization (IMO) All SIKAFLEX products are high-quality, one-component adhesives and sealants based on polyurethane. By absorbing moisture from the air, the plastic sealant becomes a high-quality elastomer. We only supply products from the blue SIKAFLEX Marine line, which were specially developed by SIKA-Chemie for the maritime sector. They are characterized by a broad adhesion spectrum and can be used on all boat building materials. For wooden substrates, a suitable primer must be used, e.g. Sika Primer-290 DC or Sika MultiPrimer Marine. Attention: SIKAFLEX-290 DC PRO contains 4,4'-methylenediphenyl diisocyanate, therefore protective gloves are enclosed with the product. Please observe the hazard warnings on the product. The safety data sheets can be found at www.sika.de.

Spreadable adhesive, for example, for watertight caulking of deck seams or teak decks.SIKAFLEX products are high quality 1-part bonding and sealants in a polyurethane base.Through the absorbtion of moisture the plastic sealing compound becomes a high-quality elastomer. Product features:seawater-proof,high strength (30° Shore A hardness, 1.2 N/mm.sq. tensile strength),weather-resistant,permanently elastic,resistant to aging,sandable,UV-resistant, not corrosive,Colour black,Available as a pack (for pack guns - 600 ml).Consumption: 600 to 1200 ml/m². The rule of thumb for laying bar decks in boatbuilding is approx. 1 l/m².We exclusively carry products of the SIKAFLEX Blue Marine Line, which have been specially developed for marine use. They stand out for their wide range of adhesiveness and can be applied to all boatbuilding materials.

High-strength construction glue for watertight adhesion. SIKAFLEX products are high quality, 1-part bonding and sealing agents in a polyurethane base. Through the absorbtion of moisture the plastic sealing compound becomes a high-quality elastomer. Product features: - seawater-proof, - high strength (55í Shore A hardness, 4 N/mm.sq. tensile strength), - weather-resistant, - permanently elastic, - resistant to aging, - sandable, - UV-resistant, not corrosive. - Color: white. - Available as a cartridge (for cartridge guns - 300 ml). We exclusively carry the products of the SIKAFLEX Blue Marine Line, which have been specially developed for marine use. They stand out for their wide range of adhesiveness and can be applied to all boatbuilding materials.