SIKAFLEX 292 high strength adhesive

Special cleaner to remove residual SIKAFLEX sealer and adhesive.

SIKA Multiprimer Marine is used to improve the adhesion between Sikaflex adhesives and the various substrates such as woods like teak (for teak deck application), mahogany, oregon pine and cork, metals like aluminium and galvanized steel, paint-primed substrates, GRP and other plastics.

Sika Primer 209D is a black, moisture-curing low viscous primer specifically formulated for the treatment of painted surfaces, plastics or acrylic glass. Product Safety: For this product the hazard pictograms and signal words shown above apply, as well as the following hazard statements: H225, H317, H319, H334, H336/a>.

Cleaner for preparation of a surface for the application of a primer. To improve the adhesion properties we recommend the application of a special SIKA primer.

For an ideal adhesion when jointing wooden decks with SIKAFLEX-290 DC PRO it is highly advised to undercoat the joint flanks with SIKA-Primer 290 DC.This transparent, low viscosity primer is applied masking and has to be allowed to evaporate for at least one hour before the jointing, which has to be done in the time frame of 24 hours. SIKA-Primer 290 DC is suitable for the preconditioning of the following surfaces: - teak, - mahogany, - Oregon pine, - cork, - GRP on the basis of non-saturated polyester.

Universal sealing compound for sealing, caulking, isolate. SIKAFLEX products are high-quality, 1-part adhesives and sealants in a polyurethane base. Through the absorbtion of moisture the plastic sealing compound becomes a high-quality elastomer.Product features:seawater-proof,high strength (40í Shore A hardness, 1.8 N/mm.sq. tensile strength),weather-resistant,permanently elastic,resistant to aging,sandable,UV-resistant, not corrosive.Colors: black, brown, grey or white.Available in a small pouch tube (70 ml), in a cartridge for cartridge guns (300 ml) or packs for use in a pack gun (600 ml).We exclusively carry the products of the SIKAFLEX Blue MarineLine, which have been specially developed for marine use. They stand out for their wide range of adhesiveness and can be applied to all boatbuilding materials.All products are wheelmark certified (by Lloyds Register, DetNorske Veritas, RINA, Germanischer Lloyd, American Bureau of Shipping).SIKA's i-Cure technology allows to produce without MDI.

High-strength construction glue for watertight adhesion. SIKAFLEX products are high quality, 1-part bonding and sealing agents in a polyurethane base. Through the absorbtion of moisture the plastic sealing compound becomes a high-quality elastomer. Product features: - seawater-proof, - high strength (55í Shore A hardness, 4 N/mm.sq. tensile strength), - weather-resistant, - permanently elastic, - resistant to aging, - sandable, - UV-resistant, not corrosive. - Color: white. - Available as a cartridge (for cartridge guns - 300 ml). We exclusively carry the products of the SIKAFLEX Blue Marine Line, which have been specially developed for marine use. They stand out for their wide range of adhesiveness and can be applied to all boatbuilding materials.

SIKAFLEX-295 UV is a one-component, moisture-curing polyurethane adhesive and sealant for plastic glass (PC, PMMA) and visible joints in the marine sector. It is weather and UV-resistant, can be painted over and meets IMO requirements. Suitable for indoor and outdoor applications.Area of application: Bonding and sealing of plastic glass/glass in the marine sectorSubstrate: Aluminium (bare/anodized), GRP, stainless steel, wood, 2-component coatings, plastic glass (PC, PMMA)Application method: Cartridge or bag gun, application as a triangular beadPrimer: Sika-209 D, black pigmented (Art.No.2713-209)Further information on processing can be found in the technical data sheet under 'Downloads'.

Spreadable adhesive, for example, for watertight caulking of deck seams or teak decks.SIKAFLEX products are high quality 1-part bonding and sealants in a polyurethane base.Through the absorbtion of moisture the plastic sealing compound becomes a high-quality elastomer. Product features:seawater-proof,high strength (30° Shore A hardness, 1.2 N/mm.sq. tensile strength),weather-resistant,permanently elastic,resistant to aging,sandable,UV-resistant, not corrosive,Colour black,Available as a pack (for pack guns - 600 ml).Consumption: 600 to 1200 ml/m². The rule of thumb for laying bar decks in boatbuilding is approx. 1 l/m².We exclusively carry products of the SIKAFLEX Blue Marine Line, which have been specially developed for marine use. They stand out for their wide range of adhesiveness and can be applied to all boatbuilding materials.

Exceptionally robust and user-friendly universal marine sealant hybrid, which combines the best of different chemical fields with its STP technology (silane-terminated polymer technology). Made for especially elastic and vibration resistant sealing, easily to be over-coated and with a very wide adhesion spectrum also on non-precious metals (i.e. bronze), whereby for most tasks primers are not necessary.Extremly weather-resistant, developed for the tough marine conditions of the outdoors. SIKAFLEX 591 sets new environmental standards for the safety and the health of the user. SIKAFLEX 591 is the maritime sealant with the lowest emissions available at the time . 45° shore A hardness.1,8 N /mm² tensile strength.600 % ultimate elongation. SIKAFLEX 591 is wheelmark certified and fulfills the requirements of the International Maritime Organisation (IMO). All SIKAFLEX products of the BlueMarineLine are of high quality, one component glues and sealants on the basis of polyurethane. Through the absorption of moisture the plastic sealing compound becomes a high-quality elastomer. We exclusively carry the products of the SIKAFLEX BlueMarineLine, which have been specially developed for marine use. They are suitable for a wide range of boat building materials. You will be able to find further reading in the SIKAFLEX marine hand book or in the various product specification sheets, which can be downloaded under www.deu.sika.com/en/.

Black UV protectant tape for window sealing. Attaches from the outside of the window so that the sealant is covered and not exposed to UV rays. Available as a 10 m rolls with 10 corner pieces.

The deck joint sealant for professionals in yacht and shipbuilding. Particularly UV and seawater resistant one-component product based on polyurethane, specially developed for grouting teak decks.Easy to apply due to optimum flow properties and long smoothing time. SIKAFLEX-290 DC PRO is characterized by a good curing speed and can be sanded very well after curing.Further product features: - high strength (40° Shore A hardness, 3 N/mm tensile strength), - permanently elastic, - elongation at break approx. 600%, - silicone-free, - very good weather resistance, - non-corrosive, - can be painted over with 2-component paints. - Color: black. Available as a 300 ml cartridge or 600 ml bag for application in a bag gun, consumption example: 300 ml is sufficient for 10 linear meters for a 5x5 mm joint. SIKAFLEX-290 DC PRO is Wheel-Mark certified and meets the requirements of the International Maritime Organization (IMO) All SIKAFLEX products are high-quality, one-component adhesives and sealants based on polyurethane. By absorbing moisture from the air, the plastic sealant becomes a high-quality elastomer. We only supply products from the blue SIKAFLEX Marine line, which were specially developed by SIKA-Chemie for the maritime sector. They are characterized by a broad adhesion spectrum and can be used on all boat building materials. For wooden substrates, a suitable primer must be used, e.g. Sika Primer-290 DC or Sika MultiPrimer Marine. Attention: SIKAFLEX-290 DC PRO contains 4,4'-methylenediphenyl diisocyanate, therefore protective gloves are enclosed with the product. Please observe the hazard warnings on the product. The safety data sheets can be found at www.sika.de.