According to german legislation this product may only be sold to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.Current delivery notification: The container size 3l (2091-003) is currently not available. Please switch to the small containers. BENAR-Oil is a special product for the conservation of woods, for the interior and outside. Originally developed for tropical hard woods, BENAR-Oil stood the test of time for the treatment of all woods on board. BENAR-ÖL means moisture release, long oil and high gloss wood treatment. It provides a varnish finish effect with very high penetration and breathing properties, allowing humidity to be released without peeling off and to move together with breathable wood without cracking. Substrate to be dry and free of contamination. To be applied over newly sanded surface or on old surfaces previously coated with BENAR MARINE in good condition.BENAR-Oil GLOSSY is a slow-hardening wood-protectant (without fungicide) with breathable finish, similar to varnish.It provides for an exceptionally long lasting interval before reconditioning. Sanding before repeating coats is not necessary. For a new conserving protection, 4 coats are recommended.Yield: 14-16 m.sq./l.If a matt finish is desired when preserving wood with BENAR-OIL, apply BENAR-OIL MATTE as the final coat.For soft and light-sensitive timbers and horizontal surfaces outdoors, that are directly exposed to the sun, we recommend BENAR-ÖL UVR or BENAR-ÖL MARINE.Wood susceptible to fungi should be pretreated with our fungicidal impregnating oil IMP.

According to german legislation this product may only be sent to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.BENAR-Oil UVR is a slow-hardening wood protectant (without fungicide) with a breathable surface similar to varnish, but with a reddish UV-filter, which filters up to 90% of the damaging UV-light and protects from weathering and greying of the wood. The wood darkens with each application. Absolutely recommended for light-sensitive woods.If a matt finish is desired when preserving wood with BENAR-OIL, apply BENAR-OIL MATTE as the final coat.BENAR-Oil is a successful specialist product for the conservation of woods, for the interior and outside. Originally developed for tropical hard woods, BENAR-Oil stood the test of time for the treatment of all woods on board. BENAR-ÖL means moisture release, long oil and high gloss wood treatment. It provides a tranparent varnish finish effect with very high elasticity and good penetration and breathing properties, allowing humidity to be released without forming black rottenness spots or peeling off and to blend together with breathable wood without cracking.Yield: 14-16 m.sq./l.

According to german legislation this product may only be sent to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.Matte oil of the BENAR brand.If you wish a satin surface on BENAR treated wood, you should apply BENAR matte oil as final finish.10-12 sqm/litre.

Deeply penetrating natural oil, boiled from linseed oil, wood oil and hard spruce resin. Isoparaffinic serves as a solvent. BIO PIN boat oil dries to a high gloss and because of its composition is very long lasting, as well as water-, UV- and weather-resistant. It possesses a long-lasting elasticity, won't crack and no water can creep under. It is recommended as a base for BIO PIN.Coverage: approx. 12 m.sq./l.

A great alternative for classic wood oil systems suited especially for resinous tropical wood types and American pine. This high-gloss, one-component clear varnish with UV filter adheres very well to sanded, oil-containing wood types such as teak or iroco.With a layer build of less than five coats, the varnish oil still remains breathable. With more layers of varnish, the wood closes completely. Applicable for coating solid and plywood indoors and outdoors above the waterline, as well as for reworking existing one- and two-component varnish systems.Thinner: EPIFANES Paint Thinner, EPIFANES 1K Spray ThinnerYield approx. 12m²/l.

Clear varnish oil with satin finish and UV filter especially suitable for teak and other oily woods. A one-component, breathable finish for interior and exterior use based on urethane/alkyd resin and tung oil.The varnish oil has excellent flow properties and is suitable as a matte finish over EPIFANES Woodfinish Gloss  as well as other clear varnish systems. Suitable thinner: EPIFANES Paint ThinnerYield: approx. 13 m²/l.

Glossy, quick-drying, clear oil for wood and metal.Made using a special process from pure linseed oil and Chinese wood oil, contains no solvents.Good UV- and weather-resistance, durable and highly impact resistant.This varnish oil, used as ship varnish by the French navy, is intended for all woods and defatted metals.Coverage: approx. 20 m.sq/l.

Glossy, quick-drying, clear oil for wood and metal with exceptionally high UV protection for sunny areas.Made using a special process from pure linseed oil and Chinese wood oil, it contains no solvents.Good weather-resistance, durable and highly impact resistant.This varnish oil, used as ship varnish by the French navy, is intended for all woods and defatted metals.Coverage: approx. 20 m.sq/l.

A ready-to-use oil-based stain for coloring untreated wood. Evens out color differences and stains deep into the pores without blocking the wood. Processing and drying like LeTonkinois impregnating oil. Colors: mahogany and teak.

Transparent protective and maintenance oil with UV protection for all exterior wood, particularly suitable for teak decks. OWATROL DECK SEALER is an air-drying natural oil with properties similar to OWATROL TEXTROL Transparent. Due to its excellent penetration properties, it penetrates deep into the wood and thus protects against weathering from the inside out. It is non-film-forming and open to diffusion, so that moisture exchange is guaranteed. The transparent oil does not change the original shade of the wood, but intensifies the shade as if the surface were wet.The product is leached out by weathering over time, so regular reworking in combination with DECK CLEANER is recommended, depending on the weather conditions.Technical dataArea of application: Exterior wood, e.g. decks, furniture, masts, walkwaysSurface: clean, dry, grease-free, sand if necessaryApplication: cloth, brush, fur roller, sprayerCoverage: approx. 5 m²/l (initial treatment), approx. 10 m²/l (maintenance)Dilution: noneApplication temperature: 5 °C to max. 35 °C (not in direct sunlight)Drying time (20 °C): 24-48 hoursFurther information on processing can be found in the technical data sheet under "Downloads".

Protective and maintenance oil with high penetration capacity for all interior wood. Stabilizes raw, untreated wood from the inside out and reduces swelling and shrinkage due to saturation. Protects physically (moisture cannot penetrate) and thus prevents the infestation of mold and fungal infestation, completely without chemical fungal protection or pesticides. OWATROL INTERIÖL is colourless and produces a silky matt surface that emphasizes the natural grain of the wood. A glossy finish can be achieved by applying a further coat 24 hours after the wood is saturated.Application: Apply the oil wet-on-wet without intermediate drying (interval approx. 30 to 60 minutes) until the wood is saturated. Do not allow to dry between coats. According to the manufacturer, 4-6 coats are recommended when treating wooden floors. One hour after the last coat, the surface should be wiped with a clean, lint-free cloth to distribute and absorb excess material. Otherwise the surface may remain sticky. If this interval is exceeded, excess product can be removed mechanically by sanding or with a suitable paint remover (OWATROL DILUNETT, Art. No. 2511-001). Very absorbent woods should be treated again after 12 hours at the earliest. To achieve a perfect finish, the surface can be sanded with 120 grit sandpaper and INTERIÖL as a sanding liquid.Technical DataApplication area: Interior wood, e.g. furniture, floors, panels, kitchen countertopsSubstrate: bare, clean, dry, grease-free, soundApplication: soft flat brush, mohair roller, fine spray deviceCoverage: approx. 8-12 m²/l Thinner: noneApplication temperature: +8 °C to max. +35 °CDrying (20 °C): dust dry after 4–5 hrs, fully dry after 12–72 hrs.Further information on application can be found in the Technical Data Sheet under "Downloads".

Transparent protective and maintenance oil with UV protection for all exterior wood.OWATROL TEXTROL is an air-drying wood oil that penetrates deep into the wood and protects it from the inside out. It does not form a layer on the surface of the wood and therefore cannot flake off. Provides long-lasting protection against moisture, weathering and UV radiation and can be used on both horizontal and vertical surfaces. The RUSTIC variant is colored transparent micropigmented in the shade reddish brown (rustic). This pigmentation provides additional UV and graying protection.Application: Waxed or varnished wood should be treated with OWATROL NET-TROL (2508-001) before application. Also wood containing tannic acid such as oak should be cleaned beforehand and treated with NET-TROL. Apply two coats wet-on-wet on the bare wood at intervals of 15-30 minutes. A third coat is recommended for particularly dry or porous wood surfaces. Wait 30-60 minutes after applying the last coat and then wipe off any excess material with a clean cotton cloth to prevent a film from forming. Otherwise the surface may remain sticky or stained. Technical DataApplication area: Exterior wood, e.g. decking, cladding, furniture, fencesSubstrate: bare, clean, grease-free, dryApplication: brush, rollerCoverage: approx. 10–12 m²/lThinner: noneApplication temperature: min. +5 °C to max. +25 °C (avoid direct sunlight)Drying (20 °C): 24–48 hrsFurther information on application can be found in the Technical Data Sheet under "Downloads".