"TONKI" - the classic! Glossy, clear varnish oil for wood and metal. The formulation of LE TONKINOIS varnish oil is based on a special formula in which high-quality linseed oil and Chinese wood oil (tung oil) are cooked together. This creates a natural product without chemical additives. The varnish oil is suitable for indoor and outdoor use as well as for application under extreme weather conditions. It forms a resistant, elastic protective film with high UV resistance and highlights the natural grain of the wood.Application: LE TONKINOIS VARNISH is applied to untreated or cleanly sanded wood. Application is done with a brush or roller; for spray application, it can be diluted up to max. 10% with the appropriate LE TONKINOIS thinner. Only one thin coat should be applied per day. Stir well before use, do not apply below 12 °C.Technical DataArea of application: Wood and degreased metals indoors and outdoors, also under extreme weather conditionsSubstrate: Untreated wood, wood-based materials, limited use on corkCoverage: 20 m²/l Thinning: Max. 5–10% with LE TONKINOIS thinnerApplication method: Brush, flat brush, sprayingDrying times (at 20 °C): Dust dry after 6–8 h, reworkable after approx. 24 h, walkable after 3 days (with 2–3 coats)Further information on application can be found in the technical data sheet under 'Downloads'.

"TONKI No.1" - the classic for sunny sailing areas. LE TONKINOIS MARINE NO.1 is a glossy, clear oil varnish specially developed for wooden surfaces in maritime environments. It is approved by the French Navy as a ship varnish and is suitable for both interior and exterior use. When applied properly, the product offers high weather and UV resistance, and is abrasion and impact resistant. Made from TONKINOIS varnish oil, but slightly thinner and faster-drying. The formulation is free from chemical additives, considered child-safe (according to DIN EN 71-3), and enables long-lasting surface protection with multiple applications.ApplicationMarine No. 1 is applied to untreated or appropriately pretreated wood. Application is done using a brush, flat brush, or by spraying. The coats are applied thinly, with only one layer per day. For exterior areas, six to ten coats are recommended; for interior areas, half is sufficient. A primer with Bio Impression is recommended for untreated or highly absorbent wood. The application temperature should be at least 12 °C.Technical DataApplication area: Wooden surfaces indoors and outdoors, seawater and UV resistantSubstrate: Untreated wood, wood-based materials, conditionally corkPrimer: Bio ImpressionCoverage: 20 m²/l per coatThinning: Use undiluted; when spraying max. 10% Le Tonkinois thinnerApplication method: Brushing, rolling, sprayingDrying times (at 20 °C): Dust-dry after 5–8 h, recoatable after at least 24 hFurther information on application can be found in the Technical Data Sheet under 'Downloads'.