OWATROL MARINE STRIP / DILUNETT Paint Remover
OWATROL MARINE STRIP / DILUNETT Paint Remover
OWATROL MARINE STRIP (also sold under the name DILUNETT) is a highly effective, water-based paint and antifouling remover for outdoor use on boats and yachts. It removes up to eight coats of paint in a single operation - completely without solvents and without aggressive vapors. Thanks to its gel-like consistency, it also adheres to vertical surfaces such as hulls or mirrors, making it ideal for use on decks, hulls or superstructures.
Enables the efficient removal of varnishes, oil-based paints, stains and antifoulings with little effort. MARINE STRIP is simply applied in a thick layer, works for several hours and can then be removed with water and a brush with synthetic bristles or a high-pressure cleaner. For the after-treatment of wooden surfaces, the combination with OWATROL DECK CLEANER is recommended to neutralize the wood and restore the natural color.
Technical Data
- Application area: Removal of one-component coatings, antifoulings, wood oils, stains, grey weathering
- Substrate: wood, GRP, gelcoat, metal, plastic – not suitable for aluminium
- Application: brush, spatula
- Coverage: approx. 4 m²/l
- Thinner: none
- Application temperature: +5 °C to +35 °C (avoid direct sunlight)
- Drying (20 °C): exposure time 5–60 min, rinse thoroughly, allow surface to dry at least 48 hrs
Further information on application can be found in the Technical Data Sheet under "Downloads".
from €28.91*
€28.91*
Prices incl. VAT plus shipping costs
Description
OWATROL MARINE STRIP (also sold under the name DILUNETT) is a highly effective, water-based paint and antifouling remover for outdoor use on boats and yachts. It removes up to eight coats of paint in a single operation - completely without solvents and without aggressive vapors. Thanks to its gel-like consistency, it also adheres to vertical surfaces such as hulls or mirrors, making it ideal for use on decks, hulls or superstructures.
Enables the efficient removal of varnishes, oil-based paints, stains and antifoulings with little effort. MARINE STRIP is simply applied in a thick layer, works for several hours and can then be removed with water and a brush with synthetic bristles or a high-pressure cleaner. For the after-treatment of wooden surfaces, the combination with OWATROL DECK CLEANER is recommended to neutralize the wood and restore the natural color.
Technical Data
- Application area: Removal of one-component coatings, antifoulings, wood oils, stains, grey weathering
- Substrate: wood, GRP, gelcoat, metal, plastic – not suitable for aluminium
- Application: brush, spatula
- Coverage: approx. 4 m²/l
- Thinner: none
- Application temperature: +5 °C to +35 °C (avoid direct sunlight)
- Drying (20 °C): exposure time 5–60 min, rinse thoroughly, allow surface to dry at least 48 hrs
Further information on application can be found in the Technical Data Sheet under "Downloads".
Downloads
| CLP Regulation | |
|---|---|
| Symbols | 
|
| Signalword | Danger! |
| H phrases | H290, H314 |
| P phrases | P101, P102, P234, P280, P301+P330+P331, P303+P361+353, P305+P351+P338, P501 |
Content: 1.2048 Liter (€0.00* / 1 Liter)
