A high quality thinner for brushing or rolling most one-component primers, paints and varnishes. High solving power providing easy thinning. The double destillation of this thinner provides maximum purity.

Solvent-based prep cleaner to clean and degrease raw steel and wood surfaces before painting.Not suitable for GRP surfaces. We recommend EPIFANES Polyester Degreaser for this.

EPIFANES EASY FLOW penetrating oil is a multi-purpose additive made of natural oils to improve the impregnating ability of one-component primers or undercoats.This product can be added to all conventional and semi-synthetic paints, even under difficult conditions, a favorable result is achieved. By adding 5-10% to the paint, visible brush strokes are avoided, thus creating a closed and smooth surface. Can also be used as an impregnating oil for wood and as a preservative oil for rusted steel surfaces freed from loose rust.This product can be reworked with conventional paints.

Epifanes Polyester Degreaser for cleaning all plastic surfaces. Removes wax and oily components on polyester and is therefore recommended for cleaning before the application of paint systems. During application, make sure that the cloth is always clean and, if necessary, turn or change it more often so that the dirt is really removed from the surface.

When applied in the interior, EPIFANES hardener can admixed to all half syntectic single component boat varnishes and coloured lacquer.By adding 5 - 7 % max. the curing time is shortened substantially, without the lacquers loosing their significant qualities.By adding of up to 50 % the lacquers are becoming much harder and abrasion-resistant, but loose their elasticity.

A slow evaporating thinner for brushing and rolling EPIFANES POLY-URETHANE Yacht coatings. Also suited as slow evaporating thinner for EPIFANES PP Varnish Extra.

A fast evaporating thinner for spray applications of EPIFANES POLY-URETHANE Yacht paints and varnishes.

Thinner for spray applications of PU-SPEEDCOAT by EPIFANES.Container: 1l can.

Thinner for spray application of one-component primers, paints and varnishes. Also suitable for degreasing wood and lacquer surfaces.

Pure stand oil. When adding 2 % maximum it can prolong the initial drying period and the process time of all half syntectic single component boat varnishes and coloured lacquer.

Thinner specifically for antifouling products such as EPIFANES FOUL-AWAY, COPPER CRUISE, or CR Antifouling Primer.

Thinner for all Epifanes epoxybased products, like EPIFANES EPOXY PRIMER or EPIFANES INTERIMCOAT. Also suited for soften existing epoxy to allow better bonding for fresh layers.

A fast evaporating thinner for Epifanes PP Varnish Extra. Also suited for degreasing teak wood.

Thinner No. 808 for HEMPEL antifoulings.

Thinner No. 845 for HEMPEL Epoxy-Primer.

PU-thinner no. 811 for one-component HEMPEL-varnish.

International thinner Nr. 9.For 2 component clear varnish.1 litre bottle.

GELOMAT is a dulling agent that can be given a satin finish with varnish or paint.Add, based on material grade: 10% to 50%.

Color additive for the underwater coating LeFANT T-COAT. Mix the color additive with the primer, then add the hardener and stir thoroughly. One paint pot is sufficient for a 750 ml can.

LeFant Multi-Thinner is recommended as a thinner for LeFant Epoxy Primer and as a tool and surface cleaner.

OWATROL MARINE STRIP (also sold under the name DILUNETT) is a highly effective, water-based paint and antifouling remover for outdoor use on boats and yachts. It removes up to eight coats of paint in a single operation - completely without solvents and without aggressive vapors. Thanks to its gel-like consistency, it also adheres to vertical surfaces such as hulls or mirrors, making it ideal for use on decks, hulls or superstructures.Enables the efficient removal of varnishes, oil-based paints, stains and antifoulings with little effort. MARINE STRIP is simply applied in a thick layer, works for several hours and can then be removed with water and a brush with synthetic bristles or a high-pressure cleaner. For the after-treatment of wooden surfaces, the combination with OWATROL DECK CLEANER is recommended to neutralize the wood and restore the natural color.Technical DataApplication area: Removal of one-component coatings, antifoulings, wood oils, stains, grey weatheringSubstrate: wood, GRP, gelcoat, metal, plastic – not suitable for aluminiumApplication: brush, spatulaCoverage: approx. 4 m²/lThinner: noneApplication temperature: +5 °C to +35 °C (avoid direct sunlight)Drying (20 °C): exposure time 5–60 min, rinse thoroughly, allow surface to dry at least 48 hrsFurther information on application can be found in the Technical Data Sheet under "Downloads".

Type A thinner can be used for many SEAJET products, such as antifoulings and the primer SEAJET Type 015. 5% thinner is usually sufficient as an additive for paint. Can also be used for cleaning painting tools.&nbsp

Thinner 21-06 for SIGMA paints VIKOTE 18 CR-primer and ECOFLEET 290s.

LE TONKINOIS Thinner is a universal thinner with first-class solvent properties. Range of application: Ideally suited for thinning all solvent-based LE TONKINOIS products as well as for linseed oil varnish (e.g. Art. No. 2691-001). Also suitable for quick brush and tool cleaning, degreasing and for removing resin and wax contamination. Storage: Store tightly closed, cool but frost-free. Ingredients: Isoliphates.

>According to german legislation this product may only be sent to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.Thinner 20-05 for SIGMARINE single component varnish and primers No. 24, 40, 42, 48, 49.

Orange terpene thinner/solvent.Especially intended for use with BIO PIN varnishes and oils.

SEAJET Thinner E is suitable for epoxy-based primers and coatings such as SEAJET Epoxy Primer 117. Stir the components well before use. The thinner can also be used to clean used tools such as brushes and rollers &nbsp

Thinner 91-92 for SIGMA COVER 280 and SIGMA PRIME 200.

Thinner for YACHTCARE ANTIFOULING ECO, also usable for cleaning tools and brushes. It should only be used when the YACHTCARE ANTIFOULING ECO is too viscous, for instance at low temperatures.

International thinner No. 1.For conventional single-part clear varnish.

Pure balsa turpentine, without chemical additives.Distilled from pine resin.Intended as a thinner and solvent.

PU special thinner for G4/G8 polyurethane resin.

Thinner for YACHTCARE Epoxy primer, also usable for cleaning tools and brushes. It should only be used when the YACHTCARE Epoxy primer is too viscous, for instance at low temperatures.

Coating thinner for YACHTCARE antifouling primer, also usable for cleaning tools and brushes.It should only be used when the YACHTCARE antifouling primer is too viscous, for instance at low temperatures.