EPIFANES PU-SPEEDCOAT thinner

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	packaging	Price (can)	Delivery time	Note list	Buy

Description

Special thinner for spraying PU-SPEEDCOAT from EPIFANES. Attention: This product is no longer manufactured, the stock is remaining stock.

Downloads

PDF EPIFANES Anstrichfibel DE

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Legal information about the product

CLP Regulation
Symbols
Signalword	Danger!
H phrases	H226, H302, H304, H335+H336, H411
P phrases	P102, P210, P260, P271, P280, P301+P310, P403+P233, P501

More Products from Category Thinner & additives

EPIFANES Brushthinner for Paint & Varnish

EPIFANES Brushthinner for Paint & Varnish

Aromatic-free brush thinner with high dilution power for most single-component primers, paints, and varnishes; very pure due to double distillation.Application: only stir the paint thinner into the varnish or paint in small amounts if necessary and mix thoroughly. Do not dilute more than necessary; excessive addition can cause runs and reduce the dry film thickness. Use only the thinners recommended by the manufacturer. Read the label/product information or safety data sheet before use.Technical DataApplication area: Dilution of 1K primers, paints, and varnishes; designed for brush/roller applicationApplication method: Add to the respective 1K coating, designed for brush/roller processing

From €14.95 *

EPIFANES Cleaning Solvent

EPIFANES Cleaning Solvent

Solvent-based cleaner for cleaning tools and equipment after using Epifanes 1-component varnishes, primers, and paints. Reliably removes fresh varnish and paint residues.Application: Rinse brushes, rollers, or spray equipment with Epifanes cleaning thinner immediately after use. Use only outdoors or in well-ventilated areas. Do not use for thinning varnishes. Observe safety instructions on the container and in the safety data sheet.Important: Not suitable for GRP surfaces; for this purpose, EPIFANES Polyester Degreaser (Art.No. 2059-401) is recommended.Technical DataArea of application: Cleaning of work equipment after processing Epifanes 1-C productsApplication method: Dip or rinse tools in thinner

€18.90 *

EPIFANES EASY-FLOW Paint Conditioner

EPIFANES EASY-FLOW Paint Conditioner

Penetrating oil based on natural oils, which is used as an additive to improve the flow properties of conventional and semi-synthetic paints. It reduces visible brush strokes, impregnates wood and has a rust-inhibiting effect on steel by penetrating deep into the substrate. This means that a favorable result can be achieved even under difficult conditions.

From €17.90 *

EPIFANES Fiberglass Prep Cleaner

EPIFANES Fiberglass Prep Cleaner

Special cleaner for degreasing polyester and gelcoat surfaces before sanding and painting. EPIFANES Polyester Degreaser removes oil, grease, wax, silicone, and other contaminants that can affect the adhesion of subsequent coatings.Application: Thoroughly wipe the surface with Epifanes Polyester Degreaser. Use a clean, lint-free cloth and change it regularly during use. Apply only to dry surfaces. Observe safety and handling instructions on the container and safety data sheet.Technical DataApplication area: Cleaning and degreasing of polyester and gelcoat surfaces before further treatmentApplication method: Apply with a lint-free cloth and wipe thoroughly

€28.91 *

EPIFANES Hardener for 1K Varnish and Paint

EPIFANES Hardener for 1K Varnish and Paint

The EPIFANES hardener is suitable for all semi-synthetic single-component varnishes and paints from EPIFANES. Especially in interior areas (e.g. on furniture, work surfaces), where an abrasion-resistant coating system is desired, the hardener can be mixed into the varnish.By adding a maximum of 5 - 7%, the curing time of the varnishes is already significantly reduced without the varnishes losing their essential qualities. By adding up to 50% of the hardener, the varnishes become significantly harder and more abrasion-resistant, but also lose their elasticity.

€29.50 *

EPIFANES POLY-URETHANE Brushthinner

EPIFANES POLY-URETHANE Brushthinner

Special thinner for Epifanes 2-component polyurethane paints. Developed for use at higher ambient temperatures to delay drying speed and ensure even flow of the coating.Application: Use only for Epifanes 2-C-PU products. Add to the paint in small amounts to achieve the desired viscosity. Especially suitable for high temperatures or large-area coatings. Observe safety and handling instructions on the container and safety data sheet.Technical DataApplication area: Thinning Epifanes 2-C polyurethane paints at high temperaturesApplication method: Add to the paint mixture in the dosage recommended by the manufacturer

From €19.90 *

EPIFANES POLY-URETHANE Spraythinner

EPIFANES POLY-URETHANE Spraythinner

A fast evaporating thinner for spray applications of EPIFANES POLY-URETHANE Yacht paints and varnishes.

€31.90 *

EPIFANES PU-SPEEDCOAT thinner

EPIFANES PU-SPEEDCOAT thinner

Special thinner for spraying PU-SPEEDCOAT from EPIFANES. Attention: This product is no longer manufactured, the stock is remaining stock.

€18.75 *

EPIFANES Spraythinner for Paint & Varnish

EPIFANES Spraythinner for Paint & Varnish

Colorless, aromatic-free special thinner for spray application of Epifanes 1-component varnishes, primers, and paints. Developed to achieve the correct spray viscosity.Application: Use only for spray application of Epifanes 1-C products. Add thinner in small amounts until the recommended spray viscosity is achieved. Do not overdose, as this can negatively affect drying and film thickness. Observe the safety and processing instructions on the product packaging.Technical DataApplication area: Thinner for spray application of Epifanes 1-C varnishes, primers, and paintsApplication method: Add to Epifanes 1-C products to adjust spray viscosity

€20.90 *

EPIFANES STAND OIL Retarder

EPIFANES STAND OIL Retarder

Pure stand oil. When adding 2 % maximum it can prolong the initial drying period and the process time of all half syntectic single component boat varnishes and coloured lacquer.

€43.90 *

EPIFANES Thinner D-100

EPIFANES Thinner D-100

Universal special thinner for various Epifanes products such as EPIFANES CR Antifouling Primer or antifoulings such as EPIFANES FOUL-AWAY. It is used to adjust the application viscosity and is also suitable for cleaning tools after application.Application: Add to the respective Epifanes product in small quantities until the desired viscosity is achieved. Do not dilute more than necessary to avoid impairing drying and layer build-up. Also suitable for cleaning brushes, rollers and spraying equipment after use. Observe the safety instructions on the container and safety data sheet.

From €15.51 *

EPIFANES Thinner D601

EPIFANES Thinner D601

Thinner for all Epifanes epoxybased products, like EPIFANES EPOXY PRIMER or EPIFANES INTERIMCOAT. Also suited for soften existing epoxy to allow better bonding for fresh layers.

From €17.95 *

EPIFANES Thinner for PP Varnish Extra

EPIFANES Thinner for PP Varnish Extra

Special thinner for Epifanes Poly-Propoxides (PP) 2-component products. Developed to adjust processing viscosity and to clean the tools used after working with these systems.Application: Use only for thinning Epifanes PP-2C products in the quantities specified by the manufacturer. Do not overdose, as this may negatively affect drying and layer formation. Also suitable for cleaning brushes, rollers, and spray equipment after processing PP systems. Observe safety and handling instructions on the container and safety data sheet.Technical DataApplication area: Thinning and cleaning with Epifanes Poly-Propoxides (PP) 2-component productsApplication method: Add to paint or primer mixture according to manufacturer's instructions; clean tools by rinsing

€32.90 *

HEMPEL Thinner No. 808

HEMPEL Thinner No. 808

HEMPEL Thinner No. 808 is suitable for thinning single-component HEMPEL antifoulings and for cleaning tools such as brushes or rollers.

€20.90 *

HEMPEL Thinner No. 811

HEMPEL Thinner No. 811

HEMPEL'S Thinner No. 811 is suitable for thinning and cleaning tools for one-component primers, top coats and lacquers from HEMPEL.

€20.90 *

HEMPEL Thinner No. 845

HEMPEL Thinner No. 845

The thinner HEMPEL Thinner No. 845 is suitable for thinning and cleaning the HEMPEL Light Primer (Art. No. 2577-055).

€20.90 *

INTERNATIONAL THINNER No. 9 for 2-component varnish

INTERNATIONAL THINNER No. 9 for 2-component varnish

International Thinner No.9.For two-component clear coats. 1 l container.

€31.95 *

INTERNATIONAL THINNER Nr.1 for one-component products

INTERNATIONAL THINNER Nr.1 for one-component products

INTERNATIONAL THINNER No.1. is a universal thinner for one-component products (except Primocon and antifoulings) and for varnishes.Technical dataArea of application: Thinning of INTERNATIONAL 1K productsCompatible with: INTERNATIONAL ORIGINAL Art.No. 2550-001), COMPASS (Art.No. 2550-076), SCHOONER (Art.No. 2550-073)

From €14.95 *

LE TONKINOIS GELOMAT

LE TONKINOIS GELOMAT

LE TONKINOIS GELOMAT is a matting agent for combination with all LE TONKINOIS lacquers. It is added to the last coat of lacquer to achieve a satin to matt surface. Depending on the mixing ratio, different gloss levels such as matt, silk matt or silk gloss can be achieved.Application For a matt surface, mix LE TONKINOIS GELOMAT and lacquer in a ratio of 1:1. For silk matt results, use a ratio of 1:2, for silk glossy surfaces, use a ratio of 1:3. Ensure good ventilation during application. The drying time corresponds to that of the paint product used.Further information can be found in the technical data sheet under 'Downloads'.

From €16.51 *

LE TONKINOIS Thinner

LE TONKINOIS Thinner

LE TONKINOIS Thinner is a universally applicable thinner for all solvent-based LE TONKINOIS products, linseed oil varnish (Art.No. 2691-001), as well as for cleaning brushes and tools, degreasing surfaces, and removing resin or wax contaminants. Application: Always ensure good ventilation during use. LE TONKINOIS Thinner can be used both for targeted thinning during application and for cleaning purposes. Ingredients: IsoaliphaticsFurther information on application can be found in the technical data sheet under 'Downloads'.

Content: 1.2048 Liter (€0.00* / 1 Liter)

€9.90 *

LEFANT Farbzusatz für T-COAT

LEFANT Farbzusatz für T-COAT

Color additive for the underwater coating LeFANT T-COAT. Mix the color additive with the primer, then add the hardener and stir thoroughly. One paint pot is sufficient for a 750 ml can.

€9.90 *

LEFANT MULTI Thinner

LEFANT MULTI Thinner

LeFant Multi-Thinner is recommended as a thinner for LeFant Epoxy Primer and as a tool and surface cleaner.

€29.90 *

OWATROL MARINE STRIP / DILUNETT Paint Remover

OWATROL MARINE STRIP / DILUNETT Paint Remover

OWATROL MARINE STRIP (also sold under the name DILUNETT) is a highly effective, water-based paint and antifouling remover for outdoor use on boats and yachts. It removes up to eight coats of paint in a single operation - completely without solvents and without aggressive vapors. Thanks to its gel-like consistency, it also adheres to vertical surfaces such as hulls or mirrors, making it ideal for use on decks, hulls or superstructures.Enables the efficient removal of varnishes, oil-based paints, stains and antifoulings with little effort. MARINE STRIP is simply applied in a thick layer, works for several hours and can then be removed with water and a brush with synthetic bristles or a high-pressure cleaner. For the after-treatment of wooden surfaces, the combination with OWATROL DECK CLEANER is recommended to neutralize the wood and restore the natural color.Technical DataApplication area: Removal of one-component coatings, antifoulings, wood oils, stains, grey weatheringSubstrate: wood, GRP, gelcoat, metal, plastic – not suitable for aluminiumApplication: brush, spatulaCoverage: approx. 4 m²/lThinner: noneApplication temperature: +5 °C to +35 °C (avoid direct sunlight)Drying (20 °C): exposure time 5–60 min, rinse thoroughly, allow surface to dry at least 48 hrsFurther information on application can be found in the Technical Data Sheet under "Downloads".

From €28.91 *

SEAJET THINNER A Thinner for Antifouling

SEAJET THINNER A Thinner for Antifouling

Type A thinner can be used for many SEAJET products, such as antifoulings and the primer SEAJET Type 015. 5% thinner is usually sufficient as an additive for paint. Can also be used for cleaning painting tools.&nbsp

€25.60 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.