HEMPEL SILIC ONE Propeller-Kit

Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.

HEMPEL SILIC ONE Propeller-Kit

€59.90*

Content: 0.7519 (€79.66* / 1 Liter)

€59.90*

Content: 0.7519 Liter (€79.66* / 1 Liter)

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

colour

black

contents

2 x 0,375 l

Important: Please note that the propeller must be free of any old paint/antifouling. We recommend that you adhere very closely to the processing instructions and recoating intervals in the application data sheet.

For first time coating it is recommended to use HEMPEL Light Primer, which you have to order seperately.

Technical Data

Area of use: all waters
Boat type: For sailing and motorboats; specifically suited for propellers and underwater fittings
Substrate: Applicable only over HEMPEL Silic One Tiecoat; suitable for GRP and steel
Primer: HEMPEL SILIC ONE TIECOAT
Coverage: 10 m²/l
Thinner: Do not thin
Application method: Brush, roller
Pot life: 60 mins at 20°C
Overcoating intervall: recoatable with SILIC ONE TIECOAT or itself after 16 hrs at 10°C
Refloating time (time between painting and launching): 24 hrs to 1 month at 20 °C

more information

Show article

📖 View article in the TOPLICHT catalogue

Art. No.	colour	contents	Price (can)	Delivery time	Note list	Buy

Downloads

For first time coating it is recommended to use HEMPEL Light Primer, which you have to order seperately.

Technical Data

Area of use: all waters
Boat type: For sailing and motorboats; specifically suited for propellers and underwater fittings
Substrate: Applicable only over HEMPEL Silic One Tiecoat; suitable for GRP and steel
Primer: HEMPEL SILIC ONE TIECOAT
Coverage: 10 m²/l
Thinner: Do not thin
Application method: Brush, roller
Pot life: 60 mins at 20°C
Overcoating intervall: recoatable with SILIC ONE TIECOAT or itself after 16 hrs at 10°C
Refloating time (time between painting and launching): 24 hrs to 1 month at 20 °C

Legal information about the product

CLP Regulation
Symbols
H phrases	H226, H412
P phrases	P210, P273

Questions about the product?

Accessories

HEMPEL LIGHT PRIMER

HEMPEL LIGHT PRIMER is a high-quality two-part epoxy primer for below and above the waterline.It acts as a good protection against water penetration on rigid surfaces, to prevent and repair osmosis damage in GRP and as a rust-protectant on metals. It can also be used on plywood and hard woods.LIGHT PRIMER is a very good bonding agent for deck paint and antifouling.A high-quality two-part primer for above and below the waterline for boats of GRP, steel, wood and aluminum.According to german legislation the 5 litre bucket 2577-057 may only be sold to professional users. If this applies to you, please order here to your company adress. You may also buy this product personally in our showroom in Hamburg.Coverage: 5.2 m.sq./l when sprayed on, approx. 8 m.sq./l when rolled or brushed.Thinner: HEMPEL THINNER 845.

From €24.89 *

Details

Last seen products

More articles from this category

EPIFANES FOUL AWAY Biocide Free Bottom Paint

EPIFANES FOUL-AWAY is a self-polishing, biocide-free underwater ship paint. Suitable for freshwater, brackish water and occasional saltwater areas. Suitable for all boat building materials. Adheres to all hard antifoulings and self-polishing antifoulings. Three coats are recommended for the first application.Technical DataArea of use: Freshwater areas and temporary exposure in brackish and saltwaterBoat type: Sailing and motorboats Substrate(with suitable primer): Wood, steel, GRP, aluminium, existing hard or self-polishing antifoulingsPrimer: EPIFANES Interimcoat or EPIFANES Underwater PrimerCoverage: 10 m²/l at 50 µm dry film thicknessThinner: EPIFANES Thinner D-100Application method: Brush, roller, sprayDrying times: Dust dry after 1 hr at 20 °C; recoatable after 6 hrsRefloating time (time between painting and launching): 24 hrs to 6 monthsFurther information on processing can be found in the technical data sheet under "Downloads".

From €68.90 *

Details

HEMPEL ECOPOWER Racing biocide free

HEMPEL'S Ecopower Racing is a biocide-free, hard underwater hull paint with Teccel anti-adhesion technology (PTFe) for a particularly smooth and low-friction surface.Recommended for all waters with medium fouling pressure and for all waters with high environmental requirements. Suitable for all boat building materials.Technical dataArea of use: For waters with medium fouling pressureBoat type: For fast sailing and motorboatsSubstrate (with suitable primer): GRP, wood, plywood, aluminium, steel; existing hard antifoulings in good condition Primer: HEMPEL Light Primer, HEMPEL Underwater PrimerCoverage: 12 m²/lThinner: Hempel's Thinner 808Application method: Brush, roller, paintDrying times: Touch dry after 30 min at 10 °C; recoatable after 8 hrs at 10 °CRefloating time (time between painting and launching): 24 hrs to 9 monthsFurther information on application can be found in the technical data sheet under “Downloads”.

From €35.90 *

Details

HEMPEL ECOPOWER Cruise biocide free

HEMPEL Ecopower Cruise is a biocide-free, self-polishing underwater hull paint for all materials, including aluminum. The innovative binder technology enables controlled self-renewal of the surface, seasonal fouling can be easily removed by mechanical cleaning.&nbsp

From €39.90 *

Details

HEMPEL HEMPASPEED TF Thin-Film Bottom Coating

HEMPEL'S Hempaspeed TF is a hard, biocide-free thin-layer coating for all sports boats with GRP, steel or aluminum hulls, including regatta and trailer boats. Thanks to the special hydrogel technology, it forms an ultra-smooth surface that minimizes fouling and also reduces friction. Suitable for fresh, salt and brackish water as well as inland areas. Particularly recommended in areas where the use of biocides is prohibited or restricted (also in the Netherlands). Application on existing antifouling layer: It is possible to switch from a conventional antifouling to Hempaspeed TF. The old coating (if still intact) does not need to be removed. A coat of HEMPEL Conversion Primer should be applied as an adhesion primer, followed by two coats of Hempaspeed TF.Application as a new coating: When applying a new coating, the substrate must first be sealed with HEMPEL Light Primer before applying HEMPEL Conversion Primer and two coats of Hempaspeed TF.Technical DataArea of use: For fresh and saltwater with medium fouling; mechanical cleaning may be necessary in high fouling areasBoat type: For sport and racing boats, suitable for high-speed vesselsSubstrate: GRP, steel, aluminium; suitable over existing antifouling in good conditionPrimer: HEMPEL Conversion PrimerCoverage: 11 m²/lThinner: HEMPEL'S Thinner 808Application method: Brush, roller, airless spray (professional use)Drying times: Touch dry after 30 min at 10 °C; recoatable after 8 hrs at 10 °CRefloating time (time between painting and launching): 24 hrs to 3 monthsFurther information on processing can be found in the technical data sheet under “Downloads”.

From €44.90 *

Details

LEFANT T-COAT 2K Bottom Coating

LeFANT T-COAT is a biocide-free coating for underwater hulls based on epoxy resin. It forms a hard, smooth surface that makes it difficult for growth such as algae to adhere and also protects the hull from moisture penetration. LeFANT T-COAT is free of silicones and metals and is suitable for all waters. If fouling adheres to the surface, it can be easily removed mechanically using cleaning sponges, brushes or hull cleaning systems.Technical dataArea of application: Waters with light to medium foulingBoat type: fast motor and sailing boats, trailer boatsMaterials (with primer): GRP/plastic, steel, aluminumCoverage: 4-6m²/lDilution: NonePre-treatment: Existing antifouling and one-component paints must be completely removed. Existing epoxy systems in good condition can be retained. For better adhesion and sealing of porous, sandblasted or rough surfaces and for recoating, an epoxy-based primer, such as LEFANT Epoxy Primer, is recommended (first coat diluted with 20-30% LEFANT Multi-Thinner).Application method: Brush or rollerApplication temperature: Minimum 7 °C, an ideal application temperature is 15-25 °C. To improve conditions for application at lower temperatures, use for example a heating element that can be placed close to the surface and then place the paint can in a bath of heated water.Application: Mix the primer with the desired color additive, add hardener and stir thoroughly. One paint pot contains 55 ml of paint and is sufficient for a 750 ml can. 2-3 coats (approx. 100 microns/coat) are recommended for a new structure, 3-4 coats for the color white. For a particularly smooth “racing surface”, the hardened surface can be sanded smooth with wet sandpaper. Further information on processing can be found in the technical data sheet under “Downloads”

€72.80 *

Details

LeFANT NAUTICA HARD ECO biocide free antifouling

NAUTICA HARD ECO is a biocide-free underwater hull coating from the Swedish company LEFANT, which is suitable for sailing and motor boats of all speed ranges. It forms a hard, polishing surface that protects the boat from fouling and is easy to clean.NAUTICA HARD ECO is suitable for use on aluminium hulls and is compatible with most self-polishing and hard antifouling. Two coats are sufficient for seasonal protection, additional coats may be required in areas of higher friction and wear such as the rudder, stern and waterline.ATTENTION: The colour black is currently not available. Alternatively, choose a biocide-free hard antifouling (e.g. YACHTCARE PROTECTOR HARD )Technical DataArea of use: Suitable for waters with low to medium fouling pressureBoat type: For sailing and motorboats of all speed rangesSubstrate: Suitable for GRP, aluminium and most hard or semi-soft solvent-based antifoulingsPrimer: LEFANT EPOXY PRIMERCoverage: 13 m²/lThinner: NoneApplication method: Brush, rollerDrying times: recoatable after 12 hrs at 10 °CRefloating time (time between painting and launching): 24 hrs to 2 months at 20 °CFurther application information can be found in the technical data sheet under "Downloads".

From €59.00 *

Details

HEMPEL ECOPOWER PROP Propeller-Spray

HEMPEL'S ECOPOWER PROP Spray is a biocide-free spray paint for coating propellers, Z-drives and stern drives. Protects against fouling and facilitates cleaning. An advanced binder technology controls the self-renewing effect over the entire season.For use on uncoated surfaces, priming with HEMPEL'S Prop Primer is recommended.For existing, old or traditional antifouling, remove loose material and fouling beforehand. On surfaces with existing, old hard matrix or unknown antifouling, the surface should also be wet-sanded (180 grit). Then clean and dry the surface. If the condition of the previous antifouling layer is poor, seal with a layer of primer (e.g. HEMPELS Prop Primer).Technical dataArea of application: Waters with light to medium fouling conditionsBoat type: motor and sailing boats Surface: all materials, including aluminumSuitable primer: HEMPEL'S Underwater Primer or HEMPEL'S Prop PrimerCoverage: approx. 11 m²/lDilution: noneApplication method: SprayingDrying times at 10°C: Hand dry: 30 minutes, recoatable: n.a.Refloation time (time between painting and launching) at 10°C: min. 24 hours to 1 monthFurther application information can be found in the technical data sheet under “Downloads”.

Content: 0.5 Liter (€0.00* / 1 Liter)

From €28.91 *

Details

HEMPEL SILIC ONE Propeller-Kit

HEMPEL's SILIC ONE propeller kit is an innovative, biocide-free coating for propellers with technological properties that ensure less frictional resistance and the best possible fouling protection.SILIC ONE is a copper- and biocide-free fouling release coating system based on silicone and hydrogel. Polymers in the coating react with water on the surface and form an invisible protective layer, a so-called hydrogel, between the hull surface and the water. For microorganisms, this layer is perceived as a liquid, so that they do not attach themselves to the hull in the first place. On the other hand, the micro-rough structure and the smooth surface tension prevent fouling organisms from becoming firmly anchored, so that they fall off again through manual cleaning or when moving quickly through the water.Suitable for fresh, salt and brackish water as well as inland areas. Particularly recommended in areas where biocides may not be used or only to a limited extent (also in the Netherlands).The Propller-Kit consists of:1x 375 ml SilicOne TieCoat,1x 375 ml SilicOne in blackImportant: Please note that the propeller must be free of any old paint/antifouling. We recommend that you adhere very closely to the processing instructions and recoating intervals in the application data sheet.For first time coating it is recommended to use HEMPEL Light Primer, which you have to order seperately.Technical DataArea of use: all watersBoat type: For sailing and motorboats; specifically suited for propellers and underwater fittingsSubstrate: Applicable only over HEMPEL Silic One Tiecoat; suitable for GRP and steelPrimer: HEMPEL SILIC ONE TIECOATCoverage: 10 m²/lThinner: Do not thinApplication method: Brush, rollerPot life: 60 mins at 20°COvercoating intervall: recoatable with SILIC ONE TIECOAT or itself after 16 hrs at 10°CRefloating time (time between painting and launching): 24 hrs to 1 month at 20 °C

€59.90 *

Details

SEAJET 021 EKO Biocide-free Underwater Coating

SEAJET 021 EKO is a biocide-free underwater coating that forms a hydrolysis-based, erodible layer that is constantly renewed, making it difficult for dirt and fouling to adhere. It is applied like a conventional antifouling, two coats last a season. Suitable for fresh and salt water areas with light to medium fouling pressure, regular cleaning of the surface is recommended during the year.SEAJET 021 EKO can be painted on primed wood, GRP, steel and aluminum. Suitable for boats with maximum speeds of up to 40 knots.Application: For a new coating of the underwater hull, 2 coats of SEAJET 117 Epoxy Primer are suitable for priming, for wooden hulls SEAJET 015 Underwater Primer. Then apply 2 coats of SEAJET 021 EKO. When applying to existing antifouling, compatibility should be checked beforehand, e.g. using the SEAJET compatibility table. Clean underwater coatings in good condition, apply 1 coat of SEAJET 015 Underwater Primer, then apply 2 coats of SEAJET 021 EKO.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials (with suitable primer)Coverage: approx. 10 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 7 hours.Time between painting and launching at 10°C: min. 12 hours.For information on processing, please refer to the technical data sheet under "Downloads".

Content: 0.7519 Liter (€0.00* / 1 Liter)

From €29.90 *

Details

YACHTCARE PROTECTOR HARD Bioicde Free Bottom Paint

YACHTCARE PROTECTOR HARD is a biocide-free, hard matrix bottom paint for sail and motor boats made of GRP, steel, wood or aluminum. Contains the LUBRICATOR FLUID developed by YACHTCARE, which makes it difficult for fouling to adhere to the surface.Application: For new boats, the hull should be primed accordingly, e.g. with YACHTCARE Antifouling Primer or YACHTCARE Epoxy Primer. On existing hard antifouling, the coating can be applied directly to conventional hard antifouling (not PTFE-containing) after light sanding; a conversion primer is not necessary.Technical DataArea of use: For fresh, salt, and brackish water with low to medium fouling pressureBoat type: For sailing and motorboatsSubstrate: GRP, steel, wood, aluminium; directly over hard antifouling or with primer for new buildPrimer: Epoxy Primer or Antifouling Primer (depending on substrate)Coverage: approx. 11 m²/lThinner: Not recommendedApplication method: Brush, short-pile mohair or foam rollerDrying times: Recoatable after 6 hrs at 20 °CRefloating time (time between painting and launching): 24 hrs to 6 monthsFurther information on application can be found in the technical data sheet under "Downloads".

From €42.90 *

Details

YACHTCARE SAFEGUARD SP Bioicde Free Bottom Paint

YACHTCARE SAFEGUARD SP is a self-polishing, biocide-free underwater coating for sailing areas with light to medium fouling. It is suitable for sail and motor boats made of GRP, steel, wood or aluminum. LUBRICATOR FLUID, a special additive specially developed by YACHTCARE, makes it more difficult for fouling to adhere to the surface and facilitates cleaning after the boat has been craned. SAFEGUARD SP can be applied to most sanded hard and self-polishing antifoulings, an adhesion primer is not required. Not suitable for painting on thin film antifouling.&nbsp

From €34.90 *

Details

VENEZIANI EUROSPRINT ECO Biocide Free UW-Paint

VENEZIANI EUROSPRINT ECO is a biocide-free, solvent-based paint for underwater hulls. Thanks to the hard matrix, it is also suitable for high sailing speeds. The paint can be applied to all substrates and is suitable for mixed and fresh waters.Technical dataArea of application: Waters with medium foulingBoat type: Motor and sailing boats of all speedsSubstrate (with appropriate primer): all materials, including aluminumCoverage: approx. 12.5 m²/lDilution: VENEZIANI Thinner 6470Application method: Brush, roller, spraying (professional use only)Drying times at 10°C: Recoatable: after approx. 18 hoursService life (time between painting and wetting) at 10°C: min. 24 hours to 6 monthsFurther information on processing can be found in the technical data sheet under "Downloads".

From €47.90 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm