Yacht cowl vent PVC
Classic yacht cowl vent made from soft PVC. White on the outside, red on the inside. Clearance 100mm. Height above deck 230mm.
Supplied with a simple deck flange (outer diameter 150mm) made of white plastic with sealing cap. The lower end of vent is pressed into the deck flange and snaps into place.
€39.95*
€39.95
Prices incl. VAT plus shipping costs
Description
Classic yacht cowl vent made from soft PVC. White on the outside, red on the inside. Clearance 100mm. Height above deck 230mm.
Supplied with a simple deck flange (outer diameter 150mm) made of white plastic with sealing cap. The lower end of vent is pressed into the deck flange and snaps into place.
Classic wide-oval cowl vent made of soft PVC. White on the outside, red on the inside. Available in two sizes: with 76 mm (3") or 102 mm (4") air outlet.Supplied with a simple deck flange (outer diameter 125mm/150mm) made of white plastic with sealing cap. The lower end of the vent is pressed into the deck flange and snaps into place.
Dorade box kit made from solid teak, for self-mounting. Avaialble cut to fit, sanded, with drilled holes, brass fasteners and bungs.Designed for ventilators with flange diameters up to 150 mm. Base 405 x 175 mm, height 135 mm.Cover 335 x 165 mm. For the inside flat vent of this kit we recommend the size 1 of the mushroom ventilator 1835-001 under "suitable items" down below. The ventilators shown in the photos are only an installation sample. The ventilators are not supplied with the dorade box and must ne ordered separately.
Popular and proven ventilation scoops made of durable white silicone rubber with red painted on the inside. The deck flanges and the screw rings are made of white hard plastic.The hoods can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.Product history:The LIBEC (Silikon) model replaces the older JERRY2 (PVC) model.The CHINOOk (Silikon) model replaces the older TOM2 (PVC) model.The SAMOEN (Silikon) model replaces the older YOGI2 (PVC) model.
Popular and proven ventilation scoop made of durable white silicone rubber with red painted on the inside. The deck flange and the screw ring are made of white hard plastic.The hood can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.The TRAMON (silicone) model replaces the DONALD2 (PVC) model.Supplied without closure cap.
The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.
Adapter deck flange made of 6 mm thick, high-gloss polished stainless steel (AISI 316) with four Ø 5.2 mm holes.For deck thicknesses over 25 mm, such as with classic wooden decks, multilayer decks or existing larger deck openings, the adapter flange offers a practical solution for mounting VETUS stainless steel dorade boxes.The VETUS dorade boxes of type BOX and BOXS are designed for deck thicknesses up to 25 mm and for a matching cut-out. Fixation is done using a white plastic flange with an external thread, which is screwed from the inside into an internal thread on the air duct of the box. Since this thread is only about 30 mm long, this mounting method is not suitable for thicker decks.In such cases, the adapter flange is required:It is placed from below against the seating surface of the dorade box and fixed using the plastic flange. Its screw-on contact surface is wider than the dorade box and allows direct fastening from above onto the deck. The actual deck thickness is irrelevant – as long as the control knob of the mushroom vent remains accessible through the opening
Exceptionally heavy and thick-walled vent, made in a small casting workshop in northern Italy.Traditional nautical piece in a round or oval design with matte-polished finish.The sand-casting process by hand creates a finish that, with the production structure, leaves no visible holes, dents, or cavities.Included is a round deck flange (diameter = D3) onto which the vent can be screwed and which can be mounted with three strong knurled thumb screws.A vent that can outlive many a ship!
Made of polished brass. Ring with 6 countersunk holes. Lid closes with a wide contact surface without a seal.
Low-profile hood vent, made from polished or chromed brass, for mounting on the hull.Available in two sizes.Mounting using three M6 threaded blind holes.
Flat vent made from polished, cast brass.There are two M6 screw bolts and nuts supplied for mounting.Available surfaces are: highly polished brass and chrome.
Beautiful, heavy clam-shell vent. Traditionally sand-cast brass, with a high-gloss polish. Intended for horizontal or vertical mounting on deck or on superstructure. A straight cross piece in this design keeps all wetness from flowing under the hood.
Ventilation fan with oval opening made of cast bronze. The surface has a fine satin tumbled finish. Particularly small, compact design for ventilating anchor boxes, yacht overhangs and for small dinghies and coastal cruisers.Supplied complete with screw-in deck flange (outer diameter 100 mm) and sealing cap.
Strong, thick walled, very robust gooseneck. May be used as cable fairlead or as ventilation.Made from cast sturdy bronze,tumbled with matte finish.
Robust classic deck vent.Strong bronze design, tumbled matte finish, self-sealing.For the constant ventilation of the engine room, anchor locker, bilge etc.The wooden valve ball automatically closes the vent, when the deck gets flooded. A hose can be connected below.
Polished bronze half-cowl vent to be screwed onto the sides of superstructure or wheel houses.Height 140 mm, opening 60 mm.
This vent, fashioned like a shell and made of polished bronze, screws into the deck.Can be mounted horizontally or vertically on deck or on the superstructure.A cross piece in the opening keeps spray and rainwater from flowing under the hood.
Cover that matches our sheet-copper cowl vent (Art-Nr.1847-...).To cover the flange when the vent is removed.
Cap zu close the flange ob the cowl vent 1835-...Available with polished or chromed surface.
Solid stainless-steel vent cowl with a round cowl head, polished on the outside and white-painted inside. Supplied complete with a matching heavy stainless-steel deck fitting and cap, both with polished surfaces. The cap is fitted with an O-ring seal. A key for screwing in the cap is included.
Cowl vent with a round opening. Made from polished cast brass, with polished or chromed surface.The cowl vent is placed on the deck flange and secured with a screw knurl. The deck flange has a diameter of 112 mm.
With round opening, made from chromed cast bronze.Comes complete with deck flange that can be screwed to the deck (D = 127 mm), as well as deck plate.Painted inside.
Elegant, very robust wind scoop from the British manufacturer DAVEY. The vent is made of heavy cast bronze, cleanly hand-polished. Supplied complete with deck fitting, cover and bronze key.
Long-oval "big-mouth" cowl vent made from sheet stainless steel. Polished on the outside, painted white on the inside.Comes complete with stainless steel deck fitting (D = 160 mm) and screw-on cover.Deck fittings are also available separately.
Cowl vent made of stainless steel A4 precision casting.Supplied with cover flange and screw cap, watertight thanks to O-ring seal. The vent is extremely stable and particularly corrosion-resistant. The inside is powder-coated white. Round shape made of stainless steel, bronze-coloured (Bz) coated using the TITANTUFF process. No polishing required.
Flange and cover with O-ring seal.Polished A4 stainless steel finish.A spring clip key for opening and closing is available as an accessory.
The dorade boxes made of polished stainless steel (AISI 316) drain off penetrating water via the cowl vents and can be sealed completely watertight using the internal mushroom ventilator. Suitable for a maximum deck thickness of 25 mm. VETUS adapter flanges are available on request for greater thicknesses.
Cowl vent made from precision stainless steel A4 with a long oval opening. Shipping with deck flange and screwable deck plate, water-proof with O ring gasket. The very sturdy cowl vent has a high gloss finish and is lacquered in white in the inside.
This elegant vent is made from A4 stainless steel precision casting, polished on the outside, painted white inside.A threaded flange is screwed to the deck. The vent is able to rotate and is detachable.
The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.
