To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Teak dorade box kit

Sonstige Hersteller

1845*02 Doradekasten

1845*02 Doradekasten

1845*02 Doradekasten

1845*02 Doradekasten

1845*02 Doradekasten

1845*02 Doradekasten

Teak dorade box kit

Dorade box kit made from solid teak, for self-mounting.
Avaialble cut to fit, sanded, with drilled holes, brass fasteners and bungs.
Designed for ventilators with flange diameters up to 150 mm.
Base 405 x 175 mm, height 135 mm.
Cover 335 x 165 mm.

For the inside flat vent of this kit we recommend the size 1 of the mushroom ventilator 1835-001 under "suitable items" down below.

The ventilators shown in the photos are only an installation sample. The ventilators are not supplied with the dorade box and must ne ordered separately.

more information

€124.00*

€124.00*

Prices incl. VAT plus shipping costs

description

Dorade ventilator kit

Stk

View article in the TOPLICHT catalogue

Art. No.	description	Price (unit)	Delivery time	Note list	Buy

Description

Dorade box kit made from solid teak, for self-mounting.
Avaialble cut to fit, sanded, with drilled holes, brass fasteners and bungs.
Designed for ventilators with flange diameters up to 150 mm.
Base 405 x 175 mm, height 135 mm.
Cover 335 x 165 mm.

For the inside flat vent of this kit we recommend the size 1 of the mushroom ventilator 1835-001 under "suitable items" down below.

The ventilators shown in the photos are only an installation sample. The ventilators are not supplied with the dorade box and must ne ordered separately.

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Stainless steel mushroom vent

Stainless steel mushroom vent

Functional, flat stainless steel vent with strong bell-shaped cover and glued-in rubber seal. The deck part is made of 0.8 mm thick stainless steel sheet. A stainless steel mosquito net is integrated into the bottom part.A plastic cover conceals the deck opening from the inside (installation height 25 mm) and is also available as a spare part.The fan can be closed watertight from the outside by turning the cover or from the inside by turning the hand wheel.This vent is well suited for installation in a Dorade box.

From €52.96 *

Doradebox stainless steel for VETUS cowl vents

Doradebox stainless steel for VETUS cowl vents

The dorade boxes made of polished stainless steel (AISI 316) drain off penetrating water via the cowl vents and can be sealed completely watertight using the internal mushroom ventilator. Suitable for a maximum deck thickness of 25 mm. VETUS adapter flanges are available on request for greater thicknesses.

From €305.00 *

Plastic dorade box for VETUS cowl vents

Plastic dorade box for VETUS cowl vents

The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.

From €101.99 *

More Products from Category Cowl vents

Adapter for stainless steel VETUS Dorade Box

Adapter for stainless steel VETUS Dorade Box

Adapter deck flange made of 6 mm thick, high-gloss polished stainless steel (AISI 316) with four Ø 5.2 mm holes.For deck thicknesses over 25 mm, such as with classic wooden decks, multilayer decks or existing larger deck openings, the adapter flange offers a practical solution for mounting VETUS stainless steel dorade boxes.The VETUS dorade boxes of type BOX and BOXS are designed for deck thicknesses up to 25 mm and for a matching cut-out. Fixation is done using a white plastic flange with an external thread, which is screwed from the inside into an internal thread on the air duct of the box. Since this thread is only about 30 mm long, this mounting method is not suitable for thicker decks.In such cases, the adapter flange is required:It is placed from below against the seating surface of the dorade box and fixed using the plastic flange. Its screw-on contact surface is wider than the dorade box and allows direct fastening from above onto the deck. The actual deck thickness is irrelevant – as long as the control knob of the mushroom vent remains accessible through the opening

From €149.00 *

Brass cowl vent heavy sand cast

Brass cowl vent heavy sand cast

Exceptionally heavy and thick-walled vent, made in a small casting workshop in northern Italy.Traditional nautical piece in a round or oval design with matte-polished finish.The sand-casting process by hand creates a finish that, with the production structure, leaves no visible holes, dents, or cavities.Included is a round deck flange (diameter = D3) onto which the vent can be screwed and which can be mounted with three strong knurled thumb screws.A vent that can outlive many a ship!

From €314.01 *

Brass deck plate

Brass deck plate

Flange and cover with O-ring seal.Brass or bronze, polished or chromed.

From €59.50 *

Brass shell vent AMERIKA polished or chromed

Brass shell vent AMERIKA polished or chromed

Low-profile hood vent, made from polished or chromed brass, for mounting on the hull.Available in two sizes.Mounting using three M6 threaded blind holes.

From €49.90 *

Brass shell vent BERGAMO

Brass shell vent BERGAMO

Flat vent made from polished, cast brass.There are two M6 screw bolts and nuts supplied for mounting.Available surfaces are: highly polished brass and chrome.

From €44.90 *

Brass shell vent ISERLOHN

Brass shell vent ISERLOHN

Beautiful, heavy clam-shell vent. Traditionally sand-cast brass, with a high-gloss polish. Intended for horizontal or vertical mounting on deck or on superstructure. A straight cross piece in this design keeps all wetness from flowing under the hood.

From €139.00 *

Bronze cowl vent

Bronze cowl vent

Ventilation fan with oval opening made of cast bronze. The surface has a fine satin tumbled finish. Particularly small, compact design for ventilating anchor boxes, yacht overhangs and for small dinghies and coastal cruisers.Supplied complete with screw-in deck flange (outer diameter 100 mm) and sealing cap.

€294.00 *

Bronze goose neck

Bronze goose neck

Strong, thick walled, very robust gooseneck. May be used as cable fairlead or as ventilation.Made from cast sturdy bronze,tumbled with matte finish.

€299.00 *

Bronze gooseneck vent

Bronze gooseneck vent

Robust classic deck vent.Strong bronze design, tumbled matte finish, self-sealing.For the constant ventilation of the engine room, anchor locker, bilge etc.The wooden valve ball automatically closes the vent, when the deck gets flooded. A hose can be connected below.

€599.00 *

Bronze half cowl vent DAVEY

Bronze half cowl vent DAVEY

Polished bronze half-cowl vent to be screwed onto the sides of superstructure or wheel houses.Height 140 mm, opening 60 mm.

From €119.00 *

Bronze shell ventilator DAVEY 2467

Bronze shell ventilator DAVEY 2467

This vent, fashioned like a shell and made of polished bronze, screws into the deck.Can be mounted horizontally or vertically on deck or on the superstructure.A cross piece in the opening keeps spray and rainwater from flowing under the hood.

From €91.00 *

Cover for cooper cowl vent

Cover for cooper cowl vent

Cover that matches our sheet-copper cowl vent (Art-Nr.1847-...).To cover the flange when the vent is removed.

From €41.50 *

Cover for cowl vent flange

Cover for cowl vent flange

Cap zu close the flange ob the cowl vent 1835-...Available with polished or chromed surface.

From €27.00 *

Cowl vent

Solid stainless-steel vent cowl with a round cowl head, polished on the outside and white-painted inside. Supplied complete with a matching heavy stainless-steel deck fitting and cap, both with polished surfaces. The cap is fitted with an O-ring seal. A key for screwing in the cap is included.

€239.00 *

Cowl Vent brass

Cowl Vent brass

Cowl vent with a round opening. Made from polished cast brass, with polished or chromed surface.The cowl vent is placed on the deck flange and secured with a screw knurl. The deck flange has a diameter of 112 mm.

From €109.94 *

Cowl vent bronze chromed

Cowl vent bronze chromed

With round opening, made from chromed cast bronze.Comes complete with deck flange that can be screwed to the deck (D = 127 mm), as well as deck plate.Painted inside.

€329.00 *

Cowl vent bronze DAVEY DL2470

Cowl vent bronze DAVEY DL2470

Elegant, very robust wind scoop from the British manufacturer DAVEY. The vent is made of heavy cast bronze, cleanly hand-polished. Supplied complete with deck fitting, cover and bronze key.

From €798.00 *

Cowl vent stainless steel long oval

Cowl vent stainless steel long oval

Long-oval "big-mouth" cowl vent made from sheet stainless steel. Polished on the outside, painted white on the inside.Comes complete with stainless steel deck fitting (D = 160 mm) and screw-on cover.Deck fittings are also available separately.

From €499.00 *

Cowl vent stainless steel, bronze finish

Cowl vent stainless steel, bronze finish

Wind scoop (deck vent) made of stainless steel A4 precision casting.Supplied with cover flange and screw cap, watertight thanks to O-ring seal. The wind scoop is extremely stable and particularly corrosion-resistant. The inside is powder-coated white. Round shape made of stainless steel, bronze-coloured (Bz) coated using the TITANTUFF process. No polishing required!

€355.00 *

Deck plate

Flange and cover with O-ring seal.Polished A4 stainless steel finish.A spring clip key for opening and closing is available as an accessory.

From €59.50 *

Doradebox stainless steel for VETUS cowl vents

Doradebox stainless steel for VETUS cowl vents

The dorade boxes made of polished stainless steel (AISI 316) drain off penetrating water via the cowl vents and can be sealed completely watertight using the internal mushroom ventilator. Suitable for a maximum deck thickness of 25 mm. VETUS adapter flanges are available on request for greater thicknesses.

From €305.00 *

Heavy-duty stainless steel cowl vent

Heavy-duty stainless steel cowl vent

Cowl vent made from precision stainless steel A4 with a long oval opening. Shipping with deck flange and screwable deck plate, water-proof with O ring gasket. The very sturdy cowl vent has a high gloss finish and is lacquered in white in the inside.

€499.00 *

Innox cowl vent

Innox cowl vent

This elegant vent is made from A4 stainless steel precision casting, polished on the outside, painted white inside.A threaded flange is screwed to the deck. The vent is able to rotate and is detachable.

€209.00 *

Plastic dorade box for VETUS cowl vents

Plastic dorade box for VETUS cowl vents

The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.

From €101.99 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.