Skip to main content


The PB 410 navigation light series is manufactured by the Hamburg based company PETERS & BEY, with a sturdy housing made of matte stainless steel and lenses made of polycarbonate plastic. Intended for stern mounting on the supplied slip-on hook.

MED approval for vessels up to 20m length.

Supplied without bulb. Light source socket BaY15d.

Accessories such as various mounting plates, interchangeable angles and spare parts such as lenses, sockets are available.

Accessories

LED BaY15d 10-30 v
This LED modul is equipped with 30 bright LEDs.It fits in the BaY15d socket of navigation lights. It can replace the classic navigation bulbs.Consumption is only 3 W, 350 lm, 3000K. This LED lamp is not approved for the use in navigation lights!Bulb socket BaY15d.For 10 - 30 volt.

€20.90 *
Bulb for navigation light BaY15d 12 v / 24 v
Bulb for navigation light / postion lantern with bayonet socket BaY15d. Optionally for 12 or 24 volts.For vessels under 20 m: stern and anchor light require 10 W, all other lanterns 25 W.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Bundesamt für Seeschifffahrt und Hydrographie).

From €12.00 *
Bulb BaY15d tube form 28 v
Marine bulb with 28 Volt, suitable for the socket BaY15d of navigation lights. This bulb has no approval for navigation lights!

€14.50 *

Similar products

Anchor / Signal lantern PB 400 hoistable
Allround lights from the Hamburg lamp manufacturer PETERS & BEY that can be heated up with two fastening eyelets. The housing is made of frosted stainless steel with a lens of impact-resistant polycarbonate.MED approval for ships up to 20 m length.Socket: BaY15d.Supplied without bulbs.

From €233.00 *
Signal lantern PB 431 fixed mounting
360° lantern from PETERS & BEY, for fixed mounting (diameter of mounting plate at bottom = 50 mm) for example in the masthead.The housing is made of matt stainless steel, the lenses are plastic. The signal lanterns (all-round 360°) are available in various colors and can be combined as desired, for example, two red all-round lights make up the trip lights.Spare parts such as lenses, sockets are available.MED approval for ships up to 20 m length.Socket: BaY15d.Supplied without bulbs.

From €214.00 *
Spare parts for navigation lights PB 410
Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *
Navigation Light PB 422 Stainless Steel
Classic position lanterns from the Hamburg-based company PETERS & BEY. The 422 series has the same design as the 420 series, except that the cover and base of the housing are made of matt stainless steel. The lens is made of impact-resistant polycarbonate. The cable outlet and four holes for mounting are located on the rear panel, which is made of white plastic. MED approval for vessels up to 20m in length.Bulb holder BaY15d, supplied without bulb.

From €199.00 *

Last seen products