Skip to main content


MED/SOLAS approval for vessels up to 20m in length. High quality navigation lights from the Hamburg manufacturer PETERS & BEY.

The housing is made of black plastic, the lenses are made of impact resistant polycarbonate with stainless steel bezels. The lantern can be permanently mounted on the back wall with four screws or removably mounted with the mounting kit (item no. 3233-100).

Socket: BaY15d, delivery without light bulb.

Suitable for 12/24 V on-board power supply, 25W (rear lantern 10W).

Accessories

Bulb for navigation light BaY15d 12 v / 24 v
Bulb for navigation light / postion lantern with bayonet socket BaY15d. Optionally for 12 or 24 volts.For vessels under 20 m: stern and anchor light require 10 W, all other lanterns 25 W.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Bundesamt für Seeschifffahrt und Hydrographie).

From €12.00 *
LED BaY15d 10-30 v
This LED modul is equipped with 30 bright LEDs.It fits in the BaY15d socket of navigation lights. It can replace the classic navigation bulbs.Consumption is only 3 W, 350 lm, 3000K. This LED lamp is not approved for the use in navigation lights!Bulb socket BaY15d.For 10 - 30 volt.

€20.90 *
Bulb BaY15d tube form 28 v
Marine bulb with 28 Volt, suitable for the socket BaY15d of navigation lights. This bulb has no approval for navigation lights!

€14.50 *
Mounting bracket for PB420 / PB410 lamps
Stainless steel mounting kit for Peters & Bey navigation lanterns type PB420 and PB410. The bracket is mounted on the rear wall of the lantern and can be firmly locked with the slip-on hook mounted on the boat.Supplied without lantern.

€39.00 *

Similar products

Allround light PB 427 hoistable
SOLAS/MED approval for ships up to 20 m in length. All-round lanterns from the Hamburg lamp manufacturer PETERS & BEY that can be heated up with two fastening eyelets.The housing is made of black plastic with an impact-resistant polycarbonate lens.Socket: BaY15d. Supplied without light bulb.

From €118.00 *
Allround light PB 426 fixed mounting
MED/SOLAS approval for ships up to 20 m in length.All-round lanterns for fixed mounting, manufactured by PETERS & BEY.The housing is made of black plastic with a lens of impact-resistant polycarbonate. Base diameter: 87 mm.Practical for winter storage: the lantern head can be easily unscrewed.Socket: BaY15d. Supplied without bulb.

From €110.00 *
Copper Navigation Lights PB422Cu
MED/SOLAS approval for ships up to 20 m in length.The navigation lights of the PB CLASSIC series were developed exclusively for TOPLICHT:The housing is manufactured at the PETERS & BEY lamp factory in Hamburg from matte copper sheet, the traditional material for position lanterns. It can be polished on board or left to weather naturally. The lens is made of impact resistant polycarbonate.Mounting options: The lantern can be permanently mounted with four screws over the black plastic backplate or removably mounted with the optional stainless steel mounting kit (Art.No. 3233-100) .Lamp socket BaY 15 d. Supplied without bulb.

From €199.00 *
Navigation Light PB 422 Stainless Steel
MED/SOLAS approval for ships up to 20m in length.Classic navigation lights from the Hamburg-based company PETERS & BEY. The 422 series has the same design as the 420 series, except that the cover and base of the housing are made of matt stainless steel. The lens is made of impact-resistant polycarbonate. The cable outlet and four holes for mounting are located on the rear panel, which is made of white plastic.Bulb holder BaY15d, supplied without bulb.

From €199.00 *

Last seen products