PB 570 LED signal/flashlight | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	Flashrate	colour	power (W)	range (nm)	Unit price	Delivery time	Note list	Buy

Description

The Type 570 signal/flashlight was developed by the Hamburg-based manufacturer Peters + Bey.

The Type 570 flashing light was developed for ships with special purposes. It has a robust, silver anodized aluminium housing that offers excellent mechanical strength and optimum heat dissipation. It is impact-resistant, corrosion-resistant, non-magnetic and seawater-resistant.

It is connected via 12/24 V DC (direct current) or 115/230 V AC (alternating current). Both connections are located in the housing on the underside.
The signal/flashlight type 570 is supplied without cable.

The flash rate of the white signal light (3346-205) is individual and is programmed on customer request. Please send us the desired flash rate as a comment in the last step of the ordering process.

Lens: Borosilicate glass
Protection class: IP67

Downloads

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

DHR73 LED-Signal-/ Blitzleuchte weiß 3359-736

DHR73 LED signal/flashlight

LED signal lamp developed by DEN HAAN ROTTERDAM for use in commercial shipping, e.g. for the transport of dangerous goods or on work ships.The robust housing is made of chromated, seawater-resistant aluminum and has a white powder coating. The lens is made of UV-resistant borosilicate glass. POM insulating sleeves protect against galvanic corrosion. The LED driver is encapsulated with epoxy and thus particularly well protected against seawater. The use of high-quality LEDs and components guarantees a long service life of 50.000 hours.The special feature of this signal light is the possibility of setting different light frequencies: Continuous light or flash frequencies of 30, 60, 120 or 180 flashes per minute.Power supply: 24 V on-board power supply or 230 V. Operating temperature: -25°C to 55°C. Protection class: IP67. Cable connection: 2x M25x1.5, cable diameter 7-12 mm.

From €529.00 *

More Products from Category PETERS & BEY

3234-121 Vollkreislaterne PB 426 Festeinbau - Ankerlicht, weiß

Allround light PB 426 fixed mounting

All-round light for fixed mounting, manufactured by PETERS & BEY in Hamburg. Available as an anchor light, a red signal light, a green signal light, and a yellow signal light.MED approval for vessels up to 20 m in length.The housing is made of black plastic with a lens made of impact-resistant polycarbonate.Practical for winter storage: the lantern head can be easily unscrewed.Base diameter: 87 mm.Technical specifications:Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.

From €125.00 *

3234*01 Vollkreislaternen PB 427 Kunststoff aufheißbar - Bild 1

Allround light PB 427 hoistable

All-round light PB 427 made of plastic with two mounting lugs. Manufactured by the Hamburg-based lamp maker PETERS & BEY. MED-approved for vessels up to 20 m in length. Available as a white anchor light, a red signal light, or a green signal light.The housing is made of black plastic with a lens made of impact-resistant polycarbonate.Socket: BaY15d.Bulb not included.

From €134.01 *

Volkreislaterne PB 500 zur Festmontage

Allround light PB500 fixed mounting

All-round light for fixed mounting (e.g. on deck or a light mast) with MED approval for vessels up to 50 m in length, as well as for all inland vessels up to the boundary of seagoing navigation.Waterproof housing (black) and lenses (with stainless steel covers) made of plastic; internal components made of stainless steel with a pre-installed 1.2 m cable.Available as an anchor light, a red signal light, or a green signal light.The bulb can be easily replaced from above by opening the housing lid.Technical specifications:Each light is individually numberedProtection class IP56Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.BSH-approved lights for vessels over 50 m in length are available on request.

From €199.50 *

Vollkreislaternen PB 500 aufheißbar

Allround light PB500 hoistable

All-round lights PB 500 with MED approval for vessels up to 50 m in length, as well as for all inland vessels up to the boundary of seagoing navigation.Housing made of plastic; internal components made of stainless steel with a pre-installed 1.2 m cable.Hoistable lights with stainless steel bracket.Available as an anchor light, a green signal light, or a red signal light.Technical specifications:Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.BSH-approved lights for vessels over 50 m in length are available on request.

From €279.30 *

3235*02 Vollkreislaternen PB 400 Edelstahl aufheißbar - Bild 1

Anchor / Signal lantern PB 400 hoistable

Hoistable all-round lights with two mounting lugs from the Hamburg-based lamp manufacturer PETERS & BEY. The housing is made of matt stainless steel with a lens made of impact-resistant polycarbonate.Available as an anchor light, a red signal light, or a green signal light.MED approval for vessels up to 20 m in length.Technical specifications:Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.

From €233.00 *

3232-004 Topplicht Navigationslichter mit Kupfergehäuse PB422 Cu

Copper Navigation Lights PB422Cu

The navigation lights of the PB CLASSIC series were developed exclusively for TOPLICHT.The housing is manufactured at the PETERS & BEY lamp factory in Hamburg from matte copper sheet, the traditional material for position lanterns. It can be polished on board or left to weather naturally. The lens is made of impact resistant polycarbonate.Mounting options: The lantern can be permanently mounted with four screws over the black plastic backplate or removably mounted with the optional stainless steel mounting kit (Art.No. 3233-100) .Lamp socket BaY 15 d. Supplied without bulb.MED approval for ships up to 20 m in length.

From €215.00 *

LED-Seitenlaterne PB 780 3227-001

LED navigation lantern PB 780 24V

The 780 series is the LED lantern for ships over 50 meters in length. Made in Hamburg by the manufacturer PETERS & BEY.The housing is made of black, glass fiber-reinforced polyamide with stainless steel covers and is corrosion-free, shock-proof and seawater-resistant.Thanks to the LED technology, the navigation light is maintenance-free and has a service life of 50,000 operating hours. It is also suitable for converting older type 760 navigation lights to LED, as the dimensions of the housing are identical. Weight: 950 g. Protection class IP56, suitable for 24 V on-board power supply, also available on request in 115 V or 230 V versions and as a double lantern with internally installed reserve unit.The LED lantern 780 has the following approvals: BSH, GL, UL 1104, MEDThis makes it suitable for commercial shipping.Hole spacing in the mounting plate: 155.5 x 155.5 mm.

From €541.00 *

3346*04 Montagebügel für PB 580 LED-Positionslaternen - Bild 1

Mounting Brackets for PB 580 Navigation Lights

Various mounting brackets for the PB 580 LED position lantern series (item no. 3346-...) from PETERS & BEY.The mounting brackets are made of stainless steel and are suitable for the following installation:for side mounting, pole and top mounting as well as an offset version.A heating set for the rotating beacon is also available.Each PETERS & BEY lantern is supplied with a standard mounting bracket.

From €15.01 *

3236-005 Positionslichter PB 422 Edelstahl - Heck

Navigation Light PB 422 Stainless Steel

Stainless steel position lanterns from the 422 series by Peters & Bey - now available again.Classic position lanterns from the Hamburg-based company PETERS & BEY. The 422 series has the same design as the 420 series, except that the cover and base of the housing are made of matt stainless steel. The lens is made of impact-resistant polycarbonate. The cable outlet and four holes for mounting are located on the rear panel, which is made of white plastic.With these lamps, the light source is suspended in the lamp so that the lamp base does not corrode so easily should salt water get into the lamp housing.MED approval for ships up to 20m in length.Bulb holder BaY15d, supplied without bulb.

From €199.00 *

3233*01 Positionslaternen PB 420 Kunststoff - Bild 1

Navigation lights PB420

High-quality navigation lights from the Hamburg-based manufacturer PETERS & BEY with MED approval for vessels up to 20m in length.The housing is made of black plastic, the lenses are made of impact resistant polycarbonate with stainless steel bezels. The lantern can be permanently mounted on the back wall with four screws or removably mounted with the mounting kit (item no. 3233-100).Socket: BaY15d, delivery without light bulb.Suitable for 12/24 V on-board power supply, 25W (rear lantern 10W).

From €130.00 *

3240*01 Positionslaternen PB 500 - Bild 1

Navigation lights PB500

The Series 500 is a navigation light manufactured by PETERS & BEY in Hamburg for vessels under 50 meters in length (unlimited length for inland navigation). The waterproof, black housing and lenses are made of fiberglass-reinforced polyamide, while internal components and covers are stainless steel.This position lantern is corrosion-free, shockproof, seawater-resistant, anti-magnetic, and splash-proof according to IP 56.Lamp replacement is straightforward and performed from above by opening the housing lid.The LED lantern 780 holds the following certifications: BSH, GL, UL 1104, MEDTherefore, it is suitable for commercial shipping.Technical Specifications:Hole spacing on the mounting plate: 120 x 120mm.Socket: BaY15dCompatible with 12V or 24V bulbsDelivered without bulb.Supplied with 1.2m installed cable.

From €226.10 *

PB 570 LED Signal-/Blitzleuchte

PB 570 LED signal/flashlight

The Type 570 signal/flashlight was developed by the Hamburg-based manufacturer Peters + Bey.The Type 570 flashing light was developed for ships with special purposes. It has a robust, silver anodized aluminium housing that offers excellent mechanical strength and optimum heat dissipation. It is impact-resistant, corrosion-resistant, non-magnetic and seawater-resistant.It is connected via 12/24 V DC (direct current) or 115/230 V AC (alternating current). Both connections are located in the housing on the underside.The signal/flashlight type 570 is supplied without cable.The flash rate of the white signal light (3346-205) is individual and is programmed on customer request. Please send us the desired flash rate as a comment in the last step of the ordering process.Lens: Borosilicate glassProtection class: IP67

From €548.00 *

PB 580 LED combination lantern top light & deck spotligh

PB 580 LED combination lantern top light & deck spotligh

Combined LED navigation light from the PB 580 series by the Hamburg-based manufacturer Peters & Bey, consisting of a masthead light with MED approval for vessels up to 50m (or up to 20m respectively) and an LED deck spread light.Like the other lanterns in the PB 580 series, the masthead light features a compact and vibration-resistant housing made of seawater-resistant aluminum with a hard-coat anodized finish in graphite gray. The cylindrical lens is made of weather-resistant, clear borosilicate glass. Both the spread light and masthead lantern are multi-voltage capable (9-28V), with an IP67 protection rating.The deck spread light can be dimmed via an additional line (+ pole).The masthead light and deck spread light are connected via two separate cables. Wiring instructions are included.Technical specifications:Masthead light power: 17 WDeck spread light power: 3 WTotal height of the lamp: 14 cmMast base height: 8 cmMast base width: 9 cm

From €555.00 *

3346-001 Steuerbord Laterne PB 580 LED

PB 580 LED-Navigation Lights

The 580 series is an LED position light for ships under 50 meters in length. Made in Germany.Elegant, heavy and vibration-resistant housing made of seawater-resistant aluminum with hard-coat finish, graphite grey color. The cylindrical glass is a weather-resistant, clear borosilicate glass.The LED technology impresses with its low power consumption and extremely long, maintenance-free service life. MED, BSH, GL and UL 1104 approval for ships up to 50 m in length (Topp 3346-004 and combination lights up to 20 m).An internal operating hours counter causes the lantern to flash after 20,000 hours of guaranteed service life.Technical features:Multi-voltage capable 9-28 volts (Topp light item no. 3346-009: only 24 volts).Supplied ready for connection with 1.5 m cable and including corresponding holder.Dimensions diameter x height: armature 64 x 59 mm, top up to 5 sm 64 x 92 mm, all others 64 x 54 mm.Weight: approx. 350 g.Protection class IP67.Other models are available on request.

From €399.00 *

3235*01 Signallaternen PB 431 Edelstahl - Bild 1

Signal lantern PB 431 fixed mounting

All-round lights from PETERS & BEY for fixed mounting (diameter of the bottom mounting plate = 50 mm), for example on the masthead.The housing is made of matt stainless steel, the lenses are plastic. The signal lights (360° all-round) are available in various colors and can be combined as needed — for example, two red all-round lights form the restricted maneuverability signal.Available as an anchor light, a red signal light, a green signal light, or a yellow signal light.Spare parts such as lenses and sockets are available.MED approval for vessels up to 20 m in length.Socket: BaY15d.Bulb not included.

From €214.00 *

BSH certificate

3230*02 Ersatzteile für Navigationslichter PB410 - Bild 1

Spare parts for navigation lights PB 410

Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *

3236-110 V4A-Rohradapter für Typ 426 PB-Positionslaternen

V4A tube adapter for type 426 PB position lanterns

With this adapter, type 426 position lanterns from the Hamburg lamp manufacturer Peters & Bey can be mounted on a tube.The V4A tube adapter (made of CrNiMo steel) for type 426 PB position lanterns is supplied with a cover.

€35.00 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.