Spare parts for navigation lights PB 410 | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	description	version	for	colour	angle (°)	Price (unit)	Delivery time	Note list	Buy

Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

Questions about the product?

Accessories

3230-024 Topp Laterne PB 410 Edelstahl

Navigation light PB 410 stainless steel

The PB 410 navigation light series is manufactured by the Hamburg based company PETERS & BEY, with a sturdy housing made of matte stainless steel and lenses made of polycarbonate plastic. Intended for stern mounting on the supplied slip-on hook.MED approval for vessels up to 20m length. Supplied without bulb. Light source socket BaY15d. Accessories such as various mounting plates, interchangeable angles and spare parts such as lenses, sockets are available.

€269.00 *

Last seen products

More articles from this category

Navigation light control gaff rigged cutter

Navigation light control gaff rigged cutter

With the electronic position light monitoring - an exclusive TOPLICHT design for traditional ships - the failure of a bulb or LED in a navigation light or a wiring break is shown. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which may be acknowledged by pushing a key. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly. Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics:(B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control sailing yacht

Navigation light control sailing yacht

The electronic position light monitoring indicates the failure of a bulb or LED in a navigation light or a wiring failure. Up to 6 lights can be monitored (starboard / port, steaming, stern, anchor and tricolour masttop light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Additionally, an alarm LED is lit and an acoustic signal rung, which can be acknowledged by pushing a key, until the problem is fixed. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection is mounted behind the aluminium display-plate. Measurements of the display: (B x H) 110 x 145 mm. Measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control ketch

Navigation light control ketch

With the electronic position light monitoring the failure of a bulb or LED in a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 110 x 145 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Navigation light control motor yacht

Navigation light control motor yacht

With the electronic position light monitoring the failure of a bulb or LEDin a navigation light or a wiring break is indicated. Up to 5 lights can be monitored (starboard / port, steaming, stern, anchor light). The failure of a light is sent over the electronics, and the matching LED on the display goes off. Intended for 12 V or 24 V systems, maximum power per signal 3 A. The electronic connection can be mounted separatly.Measurements of the display: (B x H) 145 x 115 mm, measurements of the electronics: (B x H x T) 90 x 125 x 35 mm. Existing lighting systems can easily be upgraded with this alert panel.

€198.00 *

Lamp boards teak (pairs)

Lamp boards teak (pairs)

Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.Suitable for protecting the lamp and as a glare shield.Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40. The boards are shipped in pairs (1 x port, 1 x starboard!

€89.00 *

3230-024 Topp Laterne PB 410 Edelstahl

Navigation light PB 410 stainless steel

The PB 410 navigation light series is manufactured by the Hamburg based company PETERS & BEY, with a sturdy housing made of matte stainless steel and lenses made of polycarbonate plastic. Intended for stern mounting on the supplied slip-on hook.MED approval for vessels up to 20m length. Supplied without bulb. Light source socket BaY15d. Accessories such as various mounting plates, interchangeable angles and spare parts such as lenses, sockets are available.

€269.00 *

BSH certificate

3230-100 Ersatz-Elektroeinsatz für PB410

Spare parts for navigation lights PB 410

Lenses and seals are available as replacement parts for our sturdy and durable PETERS & BEY navigation lights, so these lanterns can remain functional for decades. Poycarbonate lenses of navigationlights can become brittle and dull after years of UV exposure, so replacing the lenses may be advisable. The lenses come with four pop rivets, and the seal kit includes two soft rubber seals. The electrical insert with bayonet socket is also replaceable.

From €5.00 *

3232-004 Topplicht Navigationslichter mit Kupfergehäuse PB422 Cu

Copper Navigation Lights PB422Cu

The navigation lights of the PB CLASSIC series were developed exclusively for TOPLICHT.The housing is manufactured at the PETERS & BEY lamp factory in Hamburg from matte copper sheet, the traditional material for position lanterns. It can be polished on board or left to weather naturally. The lens is made of impact resistant polycarbonate.Mounting options: The lantern can be permanently mounted with four screws over the black plastic backplate or removably mounted with the optional stainless steel mounting kit (Art.No. 3233-100) .Lamp socket BaY 15 d. Supplied without bulb.MED approval for ships up to 20 m in length.

From €199.00 *

Navigation lights PB420

Navigation lights PB420

High-quality navigation lights from the Hamburg-based manufacturer PETERS & BEY with MED approval for vessels up to 20m in length.The housing is made of black plastic, the lenses are made of impact resistant polycarbonate with stainless steel bezels. The lantern can be permanently mounted on the back wall with four screws or removably mounted with the mounting kit (item no. 3233-100).Socket: BaY15d, delivery without light bulb.Suitable for 12/24 V on-board power supply, 25W (rear lantern 10W).

From €130.00 *

Mounting bracket for PB420 / PB410 lamps

Mounting bracket for PB420 / PB410 lamps

Stainless steel mounting kit for Peters & Bey navigation lanterns type PB420 and PB410. The bracket is mounted on the rear wall of the lantern and can be firmly locked with the slip-on hook mounted on the boat.Supplied without lantern.

€41.00 *

Allround light PB 427 hoistable

Allround light PB 427 hoistable

All-round light PB 427 made of plastic with two mounting lugs. Manufactured by the Hamburg-based lamp maker PETERS & BEY. MED-approved for vessels up to 20 m in length. Available as a white anchor light, a red signal light, or a green signal light.The housing is made of black plastic with a lens made of impact-resistant polycarbonate.Socket: BaY15d.Bulb not included.

From €128.00 *

Allround light PB 426 fixed mounting

Allround light PB 426 fixed mounting

All-round light for fixed mounting, manufactured by PETERS & BEY in Hamburg. Available as an anchor light, a red signal light, a green signal light, and a yellow signal light.MED approval for vessels up to 20 m in length.The housing is made of black plastic with a lens made of impact-resistant polycarbonate.Practical for winter storage: the lantern head can be easily unscrewed.Base diameter: 87 mm.Technical specifications:Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.

From €120.00 *

Signal lantern PB 431 fixed mounting

Signal lantern PB 431 fixed mounting

All-round lights from PETERS & BEY for fixed mounting (diameter of the bottom mounting plate = 50 mm), for example on the masthead.The housing is made of matt stainless steel, the lenses are plastic. The signal lights (360° all-round) are available in various colors and can be combined as needed — for example, two red all-round lights form the restricted maneuverability signal.Available as an anchor light, a red signal light, a green signal light, or a yellow signal light.Spare parts such as lenses and sockets are available.MED approval for vessels up to 20 m in length.Socket: BaY15d.Bulb not included.

From €214.00 *

Anchor / Signal lantern PB 400 hoistable

Anchor / Signal lantern PB 400 hoistable

Hoistable all-round lights with two mounting lugs from the Hamburg-based lamp manufacturer PETERS & BEY. The housing is made of matt stainless steel with a lens made of impact-resistant polycarbonate.Available as an anchor light, a red signal light, or a green signal light.MED approval for vessels up to 20 m in length.Technical specifications:Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.

From €233.00 *

Mounting for PB 410

Mounting for PB 410

Mounting bracket for PB 410 navigation lights.Inox.Short or long version available.

From €14.95 *

Mounting plate upright for navigation lights PB

Mounting plate upright for navigation lights PB

Mounting accessory and spare parts for PB lights:

€48.00 *

Socket BaY15d for navigation lights PB 400

Socket BaY15d for navigation lights PB 400

Mounting accessory and spare parts for PB lights:

€15.90 *

Positionslaternen PB 500

Navigation lights PB500

The Series 500 is a navigation light manufactured by PETERS & BEY in Hamburg for vessels under 50 meters in length (unlimited length for inland navigation). The waterproof, black housing and lenses are made of fiberglass-reinforced polyamide, while internal components and covers are stainless steel.This position lantern is corrosion-free, shockproof, seawater-resistant, anti-magnetic, and splash-proof according to IP 56.Lamp replacement is straightforward and performed from above by opening the housing lid.The LED lantern 780 holds the following certifications: BSH, GL, UL 1104, MEDTherefore, it is suitable for commercial shipping.Technical Specifications:Hole spacing on the mounting plate: 120 x 120mm.Socket: BaY15dCompatible with 12V or 24V bulbsDelivered without bulb.Supplied with 1.2m installed cable.

From €226.10 *

Vollkreislaternen PB 500 aufheißbar

Allround light PB500 hoistable

All-round lights PB 500 with MED approval for vessels up to 50 m in length, as well as for all inland vessels up to the boundary of seagoing navigation.Housing made of plastic; internal components made of stainless steel with a pre-installed 1.2 m cable.Hoistable lights with stainless steel bracket.Available as an anchor light, a green signal light, or a red signal light.Technical specifications:Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.BSH-approved lights for vessels over 50 m in length are available on request.

From €279.30 *

Volkreislaterne PB 500 zur Festmontage

Allround light PB500 fixed mounting

All-round light for fixed mounting (e.g. on deck or a light mast) with MED approval for vessels up to 50 m in length, as well as for all inland vessels up to the boundary of seagoing navigation.Waterproof housing (black) and lenses (with stainless steel covers) made of plastic; internal components made of stainless steel with a pre-installed 1.2 m cable.Available as an anchor light, a red signal light, or a green signal light.The bulb can be easily replaced from above by opening the housing lid.Technical specifications:Each light is individually numberedProtection class IP56Socket: BaY15dFor 24V operation, use a bulb with a maximum of 25W (Item No.: 3255-224)For 12V operation, use a bulb with a maximum of 15W (Item No.: 3255-112)Bulb not included.BSH-approved lights for vessels over 50 m in length are available on request.

From €199.50 *

Request sent successfully

Request wasn't send - a error occured. Please try again.