Spare burner pot REFLEKS | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	For Stove	included	D (mm)	D1 (mm)	H (mm)	Unit price	Delivery time	Note list	Buy

Description

The burner pots in REFLEKS oil-fired stoves are made of sheet steel, so they may need to be replaced after years of use.
The burner pots are supplied complete with a welded inlet pipe and stainless steel flame guide rings. The small burner pots, models 66M and 71M, also include a stainless steel glow coil (catalyst) in the scope of delivery.
For the larger burner pots, the catalysts must be ordered separately.

We also carry replacement parts for REFLEKS stoves not listed here, such as burner rings, complete inner stoves, and heating coils.

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

More Products from Category REFLEKS flue pipes

4282*02 Adapter für SALAMANDER SE / LITTLE RANGE auf REFLEKS Rohre - Bild 1

Adapter for SALAMANDER SE to REFLEKS exhaust pipe

This adapter is suitable for the "SALAMANDER SE" and "LITTLE RANGE" stoves from SALAMANDER and enables the use of the stainless steel flue pipe system from REFLEKS with a diameter of 114 mm.

€51.50 *

Burner coil for REFLEKS oil heater 60/61

Burner coil for REFLEKS oil heater 60/61

Combustion chamber insert with catalytic converter function for retrofitting the 60 and 61 models.All new REFLEKS stoves, with the exception of the 60/61 models, are already equipped with these spirals.The grid-shaped catalytic converter is placed in the burner pot of the REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.

€99.00 *

4289*01 Glühspirale für REFLEKS-Öfen 62

Burner coil for REFLEKS oil heater 62

Replacement combustion chamber insert with catalytic converter function for REFLEKS stoves in the 62 model series.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.

€99.00 *

4289*04 Glühspirale für REFLEKS-Öfen 67

Burner coil for REFLEKS oil heater 67

Replacement combustion chamber insert with catalytic converter function for REFLEKS stoves of the 67 models.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.

€85.89 *

4289*02 Glühspirale für REFLEKS-Öfen 66/71

Burner coil for REFLEKS oilheater 66/71

Replacement combustion chamber insert with catalytic converter function for REFLEKS stoves in the 66 and 71 model series.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.

€76.00 *

4276*02 Deckel / Abdeckkappe für Decksdurchführung Bronze - Bild 1

Cap for Through Deck Fitting, Bronze

Sturdy bronze cover that provides a secure closure for the exhaust system of the marine stove or ship's oven. Suitable for our bronze through deck fitting and REFLEKS stainless steel thru deck fittings.The bronze cap is fixed and secured with a small knurled screw.

From €142.00 *

4276*01 Deckel für Decksdurchführungen REFLEKS

Cap for through-hull REFLEX

Closing cap, stainless steel. Suitable for all REFLEKS flue pipes.

From €50.50 *

4279*01 Decksdurchführungen REFLEKS - Bild 1

Deck through hull REFLEKS

Deck through hull with round deck plate, stainless steel. Suitable for our REFLEKS flue pipes.

From €134.00 *

4279*03 Decksdurchführungen REFLEKS lose Teile

Deck through hull REFLEKS components

Components for mounting a through-deck fitting that matches your deck inclination perfectly.Pipe, a round deck plate and flange to weld locally.Made of stainless steel.Fits the REFLEKS flue pipes.

From €103.00 *

4275*02 Abdeckrosetten REFLEKS

Dress ring REFLEKS

Decorative screen to cover deck through hulls from below.Small, round plate of polished stainless steel.

From €28.50 *

4273*01 Abgashauben REFLEKS

Exhaust hood REFLEKS

Standard exhaust hoods REFLEKS.

From €137.00 *

4273*03 REFLEKS Abgashaube YACHT - Bild 1

Exhaust hood Yacht REFLEKS

Thin flue cap, type YACHT.The design of this cap ensures a very secure fit and a good draft.Rain-proof and very compact.The rounded edges keep lines from hooking on it.

From €173.00 *

4252*01 Abgasrohr REFLEKS mit Zugregulierung

Flue gas damper REFLEKS

Pipe socket with draft flap for draw regulation and performance improvement of REFLEKS stoves.The exhaust ventilation is installed directly over the stove and when used automatically guides air into the exhaust guide pipe.Recommended for long or problematic exhaust leads.Length 330 mm.

From €137.00 *

4254*01 Berührschutz REFLEKS: Edelstahl / Messing / Kupfer - Bild 1

Flue guard REFLEKS

Guard for flue pipes that are installed in close quaters.Avaiable in stainless steel, brass or copper plate.The risk of contact burns is minimized, but the warmth of the pipe can still be enjoyed.Matches REFLEKS flue pipes of 70 mm or 90 mm.The flue guard is attached to the flue pipe and fixed with two stainless steel brackets, which are included in the package.Distance from flue pipe, 15 mm.

From €114.50 *

4251*01 Abgasrohrbögen 45° REFLEKS - Bild 1

Flue pipe elbow 45° REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €59.90 *

4251*02 Abgasrohrbögen 90° REFLEKS - Bild 1

Flue pipe elbow 90° REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €64.00 *

4251*03 Abgasrohrbögen 90° REFLEKS mit Reinigungsöffnung - Bild 1

Flue pipe elbow 90° REFLEKS with cleanout door

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €73.49 *

4250*01 Abgasrohre REFLEKS

Flue pipes REFLEKS

This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.

From €32.00 *

4292*03 Schmelz-Absperrventil für TOBY-Regler

Fuel pipe connection for TOBY controller

Fuel pipe connection for 8 mm pipe diameter.Melting cap for TOBY oil metering valves for automatic closing in the event of a fire.

€62.90 *

Grid-Shaped Catalytic Converter for REFLEKS oven 2000K

Grid-Shaped Catalytic Converter for REFLEKS oven 2000K

Replacement combustion chamber insert with catalytic converter function for the 2000 models.From model year 2023, REFLEKS stoves in the 2000K series use a different burner pot to the previous one. For this reason, a different burner pot catalytic converter is also used from this year of manufacture.The year of manufacture of your REFLEKS stove can be found on the black sticker next to the regulator. The first 4 digits of the stove number indicate the year of manufacture.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.

From €99.00 *

4274*01 REFLEKS Abgashaube H-förmig - Bild 1

H-exhaust hood REFLEKS

The flue cap of the Danish fishermen.The cap offers the most safe adjustment and is exceptionally secure against down drafts.Fits the double-walled flue pipes.

From €219.00 *

REFLEKS Abgasrohr - Hauben Adapter

Insulated flue pipe adapter REFLEKS

Required for double-walled flue pipes, in order to mount an exhaust hood that fits the inner diameter.

From €62.90 *

4281*01 Doppelte Abgasrohrbögen 45° REFLEKS - Bild 1

Insulated flue pipe elbow 45° REFLEKS

Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.

From €176.00 *

4281*02 Doppelte Abgasrohrbögen 90° REFLEKS - Bild 1

Insulated flue pipe elbow 90° REFLEKS

Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.

From €176.00 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.