The small SALAMANDER SE cast iron stove has been specially developed for small rooms. It can be used to burn logs, coal or eco-briquettes. Its heat output is 4 kW.The SALAMANDER SE solid fuel stove is available in two versions: a standard version and a version with a separate fresh air supply.The models with fresh air supply have an integrated air box at the rear of the stove, to which a flexible stainless steel air supply hose (diameter: 80 mm) is connected. This hose has a variable length of 300 mm to 1250 mm (extended).In addition to the supply air hose, the scope of delivery also includes all the necessary installation materials such as hose clips and an external cover.The efficiency of the stoves is a very good 81.4 percent. The low particulate and gas emissions comply with the European ECO DESIGN regulations and even fall below the new, stricter limit values of the HETAS Cleaner Choice Scheme. This means that the SALAMANDER SE can be operated in the so-called "smoke-free zones" in the UK. The HETAS Cleaner Choice Scheme is designed to help improve air quality in the UK through strict limits on smoke emissions and particulate matter.The user-friendly air regulator on the front of the stove allows the secondary and tertiary air supply to be precisely adjusted. The firing rate and flame pattern can therefore be controlled very precisely. The preheated tertiary air inlet also ensures efficient, clean combustion. The secondary combustion technology keeps the large viewing window clean.Installation is possible not only on board ships, but also in construction trailers or mobile tiny houses.The exhaust pipe connection has an internal diameter of 4" (100 mm) and a slightly conical external diameter of 115 mm. This means that pipes with an outer diameter of 100 mm can be inserted into the flange or pipes with an inner diameter of 115 mm can be attached.We offer an adapter for our REFLEKS stainless steel pipes of size 114 mm so that the entire REFLEKS exhaust pipe system can be used.Accessories:4356-100: Stove substructure to raise the stove by 158 mm, which also creates space for firewood.4356-101: Flue flange 90° allows the flue system to be installed at the back of the stove instead of the top.4356-103: Vermiculite plates can be replaced with the side cast-iron heat storage plates in the SALAMANDER SE.The SALAMANDER SE is supplied with cast iron heat storage plates as standard. Compared to cast iron plates, the firebox with vermiculite plates heats up much faster due to its insulating properties, which increases the efficiency of the stove.4356-108: Removable hotplate, increases the thermal mass of the SALAMANDER stove by 7 kg . The plate considerably increases the cooking surface.It can only be used if the flue gas pipe system is fitted to the rear of the stove.4356-109 4356-110: Heat protection, sturdy steel construction to shield the hot stove from surrounding walls and furniture. When using the SALAMANDER stove with base frame, the high heat protection must be used.The heat protection is supplied in four parts and is quick and easy to install.4282-115: Flue pipe adapter, for REFLEKS stainless steel pipes size 114 mm.4356-210 4356-211 Brass fittings conversion kitSpare parts:These items are supplied with every stove, but are also available as replacements.4356-104: Glass pane as a spare part if the pane in the stove is damaged and needs to be replaced.4356-105: Multitool, tool for operating the hot stove. The shaking grate, air control, ash drawer and doors can be operated without burning your fingers.4356-106 Sweeper and shovel for cleaning the oven.4356-107 Door lock

The LITTLE RANGE is a further development of the tried and tested SALAMANDER solid fuel stove.This small stove is the ideal choice for rooms where space is limited, but where it is still important to have a heating option that can be used for cooking or baking.Installation is not only possible on board ships, but also in construction trailers or mobile tiny houses.As in the SALAMANDER, logs, coal or eco-briquettes can also be burned in the LITTLE RANGE. The cooking surface on the stove has been significantly enlarged by adding a good-sized oven. The cooking surface of the LITTLE RANGE consists of a stainless steel plate that can be easily removed for cleaning.The different temperatures available on the surface of the cooking plate make it possible to cook a range of products with different heat requirements at the same time.The flue pipe connection has an internal diameter of 4 inches (100 mm). This allows the installation of pipes with an outer diameter of 100 mm in the flange.However, TOPLICHT can also supply an adapter (TOPLICHT item no. 4282-115) with which the entire REFLEKS flue gas system of size 114 mm in stainless steel quality can be used.         Dimensions:LITTLE RANGE: 715 x 630 x 400 mm (W x H x D)Stainless steel hotplate: 667 x 216 mm (W x D)Oven interior: 300 x 220 x 220 mm (W x H x D)The oven delivers 4.3 kW heat output.         Spare parts:         These items are supplied with every oven, but are also available as replacements.4356-104: Replacement glass for SALAMANDER SE and LITTLE RANGE..4356-105: Multitool, tool for operating the hot stove. The shaking grate, air control, ash drawer and doors can be operated without burning your fingers.4356-106 Sweeper and shovel for cleaning the oven.4356-107 Door lock.