- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
-
Cabin & comfort
- Lamps, lights & lanterns
- Clocks, barometers & instruments
- Stoves & heaters
- Cooker, oven & barbecue
- Interior fittings
- Cabinet fittings
- Hinges & strap hinges
- Flush handles
- Locks
- Bolts & fasteners
- Hooks
- Clothing
- Life on board
- Store nets & bags
- Bags & duffel bags
- Cushions & mattress
- Maritime decoration
- Key rings
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
By REFLEKS especially for their different stoves pre aligned oil metering valves by the swiss manufacturer TOBY.
The oil metering valves are equipped with an attached safety valve with a fusible cut-out for the automatic cut-off when the stove is overheating above 100°C. Fitting tubing: copper tube with D = 8 mm;
Inlet and overflow pipe: compression type fitting,
Outlet: flare type fitting.
The TOBY oil metering valve DVR 5 is a time-tested single compartment controller for oil stoves, that operates with the gasification technique. The controller serves to regulate the amount of oil flowing and thereby the heating output. At the same time it acts as the safety valve for the stove.
Since the CC oil metering valves used by REFLEKS before 2012 are not produced any more, a change to the TOBY oil metering valve became necessary.
from €24.89*
€29.00
Prices incl. VAT plus shipping costs
| Art. No. | model | for | B (mm) | T (mm) | H (mm) | flow rate | Unit price | Delivery time | Note list | Buy |
|---|
Description
By REFLEKS especially for their different stoves pre aligned oil metering valves by the swiss manufacturer TOBY.
The oil metering valves are equipped with an attached safety valve with a fusible cut-out for the automatic cut-off when the stove is overheating above 100°C. Fitting tubing: copper tube with D = 8 mm;
Inlet and overflow pipe: compression type fitting,
Outlet: flare type fitting.
The TOBY oil metering valve DVR 5 is a time-tested single compartment controller for oil stoves, that operates with the gasification technique. The controller serves to regulate the amount of oil flowing and thereby the heating output. At the same time it acts as the safety valve for the stove.
Since the CC oil metering valves used by REFLEKS before 2012 are not produced any more, a change to the TOBY oil metering valve became necessary.
Downloads
This adapter is suitable for the "SALAMANDER SE" and "LITTLE RANGE" stoves from SALAMANDER and enables the use of the stainless steel flue pipe system from REFLEKS with a diameter of 114 mm.
Combustion chamber insert with catalytic converter function for retrofitting the 60 and 61 models.All new REFLEKS stoves, with the exception of the 60/61 models, are already equipped with these spirals.The grid-shaped catalytic converter is placed in the burner pot of the REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.
Replacement combustion chamber insert with catalytic converter function for REFLEKS stoves in the 62 model series.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.
Replacement combustion chamber insert with catalytic converter function for REFLEKS stoves of the 67 models.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.
Replacement combustion chamber insert with catalytic converter function for REFLEKS stoves in the 66 and 71 model series.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.
Sturdy bronze cover that provides a secure closure for the exhaust system of the marine stove or ship's oven. Suitable for our bronze through deck fitting and REFLEKS stainless steel thru deck fittings.The bronze cap is fixed and secured with a small knurled screw.
Closing cap, stainless steel. Suitable for all REFLEKS flue pipes.
Deck through hull with round deck plate, stainless steel. Suitable for our REFLEKS flue pipes.
Components for mounting a through-deck fitting that matches your deck inclination perfectly.Pipe, a round deck plate and flange to weld locally.Made of stainless steel.Fits the REFLEKS flue pipes.
Decorative screen to cover deck through hulls from below.Small, round plate of polished stainless steel.
Thin flue cap, type YACHT.The design of this cap ensures a very secure fit and a good draft.Rain-proof and very compact.The rounded edges keep lines from hooking on it.
Pipe socket with draft flap for draw regulation and performance improvement of REFLEKS stoves.The exhaust ventilation is installed directly over the stove and when used automatically guides air into the exhaust guide pipe.Recommended for long or problematic exhaust leads.Length 330 mm.
Guard for flue pipes that are installed in close quaters.Avaiable in stainless steel, brass or copper plate.The risk of contact burns is minimized, but the warmth of the pipe can still be enjoyed.Matches REFLEKS flue pipes of 70 mm or 90 mm.The flue guard is attached to the flue pipe and fixed with two stainless steel brackets, which are included in the package.Distance from flue pipe, 15 mm.
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.
This flue pipes matches the REFLEKS heating system and other gas or coal stoves with matching exhaust outlets.Made of acid-proof stainless steel (wall depth 0.6 mm).Plugs together: slightly conical with pressed sleeve on one side.
Fuel pipe connection for 8 mm pipe diameter.Melting cap for TOBY oil metering valves for automatic closing in the event of a fire.
Replacement combustion chamber insert with catalytic converter function for the 2000 models.From model year 2023, REFLEKS stoves in the 2000K series use a different burner pot to the previous one. For this reason, a different burner pot catalytic converter is also used from this year of manufacture.The year of manufacture of your REFLEKS stove can be found on the black sticker next to the regulator. The first 4 digits of the stove number indicate the year of manufacture.The grid-shaped catalytic converter is placed in the burner pot of REFLEKS stoves and supports cleaner combustion of the fuel. Due to its open structure with a large surface area, it enables the post-combustion of unburned components and helps to reduce emissions and deposits.At high operating temperatures, the unburned hydrocarbons (HC) and carbon monoxide (CO) are oxidized. This reduces odors and visible smoke development. The heated grid structure also supports the post-combustion of fine soot particles. The result is cleaner flue gas and fewer deposits in the chimney.The metal grille stores heat and thus stabilizes the combustion process. This results in more even flame formation and improved combustion in partial load operation. The more complete conversion of the fuel means it is used more efficiently.
The flue cap of the Danish fishermen.The cap offers the most safe adjustment and is exceptionally secure against down drafts.Fits the double-walled flue pipes.
Required for double-walled flue pipes, in order to mount an exhaust hood that fits the inner diameter.
Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.
Thickness 0.6 mm, insulated with 10 mm of rock wool.Above all, at the lowest temperatures, double flue pipes are necessary outside, so that the draft through very cold pipes can be restricted.
