Surface-Mounted Step Light DAVEY

230 volt version of the proven DAVEY London mast light. This small, very robust luminaire from the British manufacturer DAVEY is originally a mast luminaire for deck lighting (see below on this page under "Suitable articles").However, this 230 volt version is also ideal for domestic use (as staircase/ house number or effect lighting).The cast bronze body is available in various surface finishes:Bronze hand-polishedmatt sandblasted bronzechrome-platedlight grey anodised aluminiummatt sandblasted bronze, dark surface (black-brown)bronze blackCable entry from the rear. Supplied without bulb.The matching LED reflector lamp MR16 (Article-No. 4519-103) can be found further down on this page under "Accessories".

Watertight lamp with curved wall bracket made of solid brass, high-gloss polished.The cord runs through the wall bracket.The polished brass version comes with polished glass, while the chromed version has a matt glass.Available with guard or without. With bayonet socket Ba15d.

A heavy, but nevertheless very delicate light, whose design has not changed since more than 100 years. Housing of solid cast brass, hand-polished.Design with bell-shaped brass shade. With solid brass switch. Porcelain socket Ba15d.

A heavy but nevertheless very delicate light, whose design has not changed since more than 100 years.Housing of cast brass, hand-polished or chromed.Delicate shade of satined glass.Without switch.Bulb holder Ba15d (SBC), comes without bulb.

A heavy, but nevertheless very delicate light, whose design has not changed since more than 100 years.Housing of solid cast brass, hand-polished. Polished or chromed finish.Delicate shade of satin glass.Solid brass switch.Bulb holder Ba15d (SBC), comes without bulb.

Delicate mounted light, sand-cast brass, polished.The light is watertight. The top, with clear glass and soldered guard, can be opened and screws in with wing nuts.Three attachment feet for ceiling or wall mounting, watertight cord entry.The interior is painted white.Socket Ba15d, no bulb supplied.

Robust, yet delicate and watertight ceiling light with screw-in grille body and clear glass. High-gloss polished brass. Mounted with flat ceiling flange.Ba15d bulb holder for standard or LED bulb.

Classic lamp from DAVEY with modern LED lighting technology: low power consumption, long life, pleasant warm white light, no heat problems! The light shines down through the frosted glass. The heavy bunk lamp (or indirect lighting) will be recessed into the bulkhead. This shape was also used for a long time as step lighting in British buses.The body is made of polished cast brass. The lamp is optionally available with a strong brass toggle switch in the front or without a switch.Socket: 2 x G4.Supplied with 2 LED bulbs 8-30V, 2 x 12 warm white (3000 K) LEDs, 120 lm, approx. 1.4W.

High quality brass luminaires from DAVEY, with the distinctive matte white satin Moonstone glass. The heavy, extremely robust housing (1.85 kg!) made of cast brass has a chrome-plated surface. The fixture is available with or without a rocker switch.The luminaire opens from the front, so the version without switch can also be mounted recessed in the ceiling. Socket Ba15d. Supplied without bulb.

High-quality brass LED lights, with the unique matte-white satin "jelly mould" Moonstone glass. The heavy, extremely robust cast brass housing (1,85 kg!) is available with a polished or chromed finish. You can get the light with a strudy switch or without switch.The lights are opened from the front, so that the version without switch can be mounted sunk into the ceiling.Socket G4, with LED bulb 8-30V, 10 warmwhite (3000 K) LEDs, 165 lm.

High-quality level brass lights, with the unique matte-white satin "jelly mould" Moonstone glass. The heavy, extremely robust cast brass housing (1,25 kg!) is available with a polished or chromed finish.The lights are opened from the front.Socket G4, delivery with LED bulb 8-30 V, 10 warmwhite (3000 K) LEDs, 165 lm.

With red and white LED, for cabin, bridge and chart table lighting at sea. High-quality brass lights with the unmistakable matt white satin Moonstone glass. The heavy, extremely robust housing (1.85 kg!) made of cast brass is available in polished brass or chrome-plated finishes.Switching between the bright white standard lighting and the red "sea lighting" is done simply by pressing the switch several times (off - red - off - white - off). A sequence must be followed, otherwise the switchover will not work:On: Red lightOffOn: White lightOff, wait at least 10 secondsOn: Red lightThe light is opened from the front.G4 socket, complete with red-white LED light source (white: 10 warm white (3000 K) LEDs, 165 lm). For 8-30 volts.

Now with LEDs!In the country of origin, England, these lights are called "teardrop" because of their unusual shape.Exceptionally well suited as discrete berth lamps without corners and edges.Solid, heavy design of solid cast brass, polished.Toggle switch in the housing.Size: L x W x H = 150 x 70 x 65 mm.Ba15d bayonet socket.Comes with LED bulb 8-30V, 12 warmwhite (3000K) LEDs, 60lm, consumption approx. 0,7W.Spare glass is available.

This delicate wall light was originally used in the salon cars of the British Railway, and later used in yacht construction.Timeless art deco design. The heavy glass body of satined cast glass (called "Moonstone" in England) is fixed with a delicate chromed brass band. The lamp produces a beautiful light.Back plate of the lamp made of plated brass, painted white.Sockets 2 x G4.With 2 LED bulbs 8-30V, 30 warmwhite (3000 K) LEDs, 270 lm, approx. only 3,6W.

Slender LED surface-mounted lamp made from cast brass, the surface is polished or chrome plated brass.Because of its satin-finished glass screen it shines a fine light as a berth light or cabin lamp without to dazzle.It is also called "Eyelid" due to the shape of the housing .Available for 12 or 24 volt. 12 warm white LEDs, 3000 K, 70 lm. By installing an additional optional LED strip the light output can be doubled.

This recessed wall luminaire from the traditional company DAVEY London was originally used in England as step lighting in buses.On board, however, it is equally suitable as ideal companionway lighting.The front grille of heavy cast brass is hand-polished or chrome-plated. It is recessed with a foam rubber gasket. The housing is made of deep-drawn sheet brass, painted white.The thick-walled, clear ribbed glass ensures good light diffusion.The lamp has a Ba15d bayonet socket.The lamp is supplied without bulb. The use of low-voltage incandescent lamps is possible as well as the use of LED lamps.Suitable bulbs can be found further down on this page under "Accessories".Weight of the lamp: 550 g.

Classic task light from the British company DAVEY. In addition to its traditional use as a step light for stairs, the low height of the flat luminaire makes it ideal for use as a ceiling light in passageways. The lamp housing has two parts - the front grid is made of heavy, polished cast brass, the counter plate is made of thick-walled sheet brass and has four holes for wall mounting. In between is a foam rubber seal.The light source is a long-life, high-intensity LED unit that is fixed to the counter plate. The light is diffused through a heavy disc of satinised glass. Capable of multiple voltages in the range of 10-30 volts. Available without a switch or with a plastic rocker switch integrated into the front grille. The lamp is supplied ready for connection with a 30 cm cable.