- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
-
Cabin & comfort
- Lamps, lights & lanterns
- Clocks, barometers & instruments
- Stoves & heaters
- Cooker, oven & barbecue
- Interior fittings
- Cabinet fittings
- Hinges & strap hinges
- Flush handles
- Locks
- Bolts & fasteners
- Hooks
- Clothing
- Life on board
- Store nets & bags
- Bags & duffel bags
- Cushions & mattress
- Maritime decoration
- Key rings
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Bulbs & LEDs
Bulb for navigation light / postion lantern with bayonet socket BaY15d. Optionally for 12 or 24 volts.For vessels under 20 m: stern and anchor light require 10 W, all other lanterns 25 W.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Bundesamt für Seeschifffahrt und Hydrographie).
Marine light bulbs without BSH certification. Fits the BaY15D socket used in navigation lights (bayonet).Version with 30 high-power LEDs (3255-103):DimmablePower consumption: 3 wattsLuminous flux: 350 lmLight color: 3000KCRI: >80Multi-voltage compatible: 10–30 volts DCBase: BaY15dTotal length: approx. 47 mmLength without base: approx. 27 mmBase length: approx. 20 mmDiameter: approx. 22 mmRated service life: 50,000 hTube-shaped version (3255-104):DimmablePower consumption: 3.2 wattsLuminous flux: 380 lmLight color: 2,700 KCRI: >80Multi-voltage compatible: 10–30 volts DCBase: BaY15dTotal length: approx. 57 mmLength without base: approx. 37 mmBase length: approx. 20 mmDiameter: approx. 16.5 mmRated service life: 25,000 h
The DHR150-series searchlight is a Classic. Introduced in the 60's it has been a popular fixture in the recreational boating ever since. Thanks to the evolvement of LED technology, DHR decided to develop a drop-in PAR46 LED replacement for the 150-series. No special modifications are needed for installation. The existing wiring can be connected to the LED-insert - without the need for extra tooling. Compared to the 100-250 Watt incandescent equivalent, it boosts a luminous intensity of 200.000 Candela (measured) using only 10 W of energy. A performance guaranteed over a voltage range of 10 - 32 VDC. Additionally, DHR selected a unique optical design to realize a clear focused spot, while keeping stray light to a minimum. An extreme narrow bundle makes the 150 LED-replacement the best performing compact marine searchlights of its class. Direct replacement the following GE Sealed beam lamps: PAR46 Sealed beam GE4537-2 PAR46 Sealed beam GE4553
LED bulb for a Ba15 socket.Available for BA15d socket (both contacts in the base) or BA15s socket (one contact in the base, one contact at the socket).<br< Voltage range 10-30 V DC.<br< Light colour: warm white (3000 K).For many reasons modern LED light units are extremely practical for various deployments on board: because of the low consumption of the LEDs scarce battery capacities can be effectively employed. The extremely long life span and their vibration resistance guaranty reliable long term usage without the need to replace them. Low heat emission.<br< Most lamps used on board can easily be converted with the various LED bulbs.We state the brightness in Lumen (lm).
LED festoon bulbs.Appropriate for 8 (10)-30 Volts DC.Light colour: warm white (3000 K). For many reasons modern LED light units are extremely practical for various deployments on board: because of the low consumption of the LEDs scarce battery capacities can be effectively employed. The extremely long life span and their vibration resistance guaranty reliable long term usage without the need to replace them. Low heat emission. Most lamps used on board can easily be converted with the various LED bulbs.We state the brightness in Lumen (lm).
Bulb for navigation light / postion lantern with P28s socket for 24 volts.Please note: The bulb is part of the approval of navigation light. If an incandescent lamp without approval is used as replacement, the approval of the complete lantern expires. Therefore, it only makes sense to have approved bulbs on board as a reserve.Our marine light bulbs come from Danlamp, Peters & Bey or the RADIUM brand. They have the required approval (type examination by the BSH - Federal Maritime and Hydrographic Agency).
LED bulb with a MR reflector.Voltage range 10-30 V DC.Light colour warm white (3000 K). For many reasons modern LED light units are extremely practical for various deployments on board: because of the low consumption of the LEDs scarce battery capacities can be effectively employed. The extremely long life span and their vibration resistance guaranty reliable long term usage without the need to replace them. Low heat emission. Most lamps used on board can easily be converted with the various LED bulbs.We state the brightness in Lumen (lm).
LED bulb with a E27/E14 socket.Voltage range 10-30 V DC.Light colour: warm whiteFor many reasons modern LED light units are extremely practical for various deployments on board: because of the low consumption of the LEDs scarce battery capacities can be effectively employed. The extremely long life span and their vibration resistance guaranty reliable long term usage without the need to replace them. Low heat emission.Most lamps used on board can easily be converted with the various LED bulbs.We state the brightness in Lumen (lm).
Tube lamp for navigation lights, with BSH approval.Electrical power: 65 WVoltage: 230 VLampholder: P28sLength: 110 mmDiameter: 38 mm
Tubular navigation bulb. B22 socket. Two types (for 24V or 230V)
LED bulb for G4 socket.Voltage range 10-30V DC.Light colour warm white (3000 K).For many reasons modern LED light units are extremely practical for various deployments on board: because of the low consumption of the LEDs scarce battery capacities can be effectively employed. The extremely long life span and their vibration resistance guaranty reliable long term usage without the need to replace them. Low heat emission. Most lamps used on board can easily be converted with the various LED bulbs.We state the brightness in Lumen (lm).
This two-color LED bulb turns any light fixture with a compatible G4 base into a night light.You can easily switch between standard white lighting and an eye-friendly red night light simply by turning the light on and off.LEDs: 10 warm white, 3000 K, 150 lm, 1.8 W / 6 red, 30 lm, 1.0 W.Round socket, D = 30 mm, with side pins (G4).Multi-voltage compatible: 10–30 V.Switching between the bright white standard lighting and the red “night light” is done simply by pressing the switch several times (Off – Red – Off – White – Off). A specific sequence must be followed; otherwise, the switch will not work:On: Red lightOffOn: White lightOff, wait at least 10 secondsOn: Red light
LED bulb for a G4 base with rear pins.Multi-voltage compatible with 12 and 24 volts DC, dimmable.Light color: warm white (3000 K).Modern LED bulbs are ideal for use on board for a variety of reasons: Their very low power consumption conserves limited battery capacity.Their extremely long service life (up to 50,000 operating hours) and high vibration resistance guarantee reliable long-term use without the need to replace the bulbs.Low heat emission allows for the installation of bright lighting even in poorly ventilated lamp housings. Most lights used on board can be easily retrofitted with the various LED inserts.
Pear-shaped bulb with E14 threaded socket.Variations in form, size and wattage are possible.
Spare bulb SEALED-BEAM for spreader lights from GENERAL ELECTRIC.Specially suitable for DHR searchlights.
These LED bulbs were developed by CABIN especially for the changeover to energy saving LED operation of their traditional CABIN lights.Light colour and intensity conform to the formerly employed halogen light bulbs, but with far less of their power consumption.Very beautiful light dispersion due to its silicon coating. Light colour warm white 2700 K.Capable of multi voltage of 12 or 24 V.Made for G4 socket and thus also suitable for other lamps with G4 light socket. The bulbs are not dimmable.The smaller 1WF is especially suited for small ceiling lights.
Spherical bulb with E14 threaded socket.Variations in form, size and wattage are possible.
