Skip to main content


Downloads

Proven universal extinguisher for class A, B, and C fires, pursuant to DIN 14406 with certification from SeeBG.
Features:
Plate-steel bracket, protected with plastic,
inner gas bottle and impact head fitting,
testable,
refillable,
hose with suppressible extinguishing nozzle for measured use,
Spray width 6 - 7 m,
filled with GLUTEX extinguishing powder.
Comes with simple wall bracket.

A vibration resistant marine bracket is also available on demand.

Last seen products

More articles from this category

Crowbar
Crowbar with nail claw. Measurments: Length: 600 mm, depth: 21 mm, weight: 1.1 kg. Fire-prevention tool pursuant to the operation guidelines for "bettering the safety of traditional ships."

€14.49 *
HENSOTHERM fire protecting paint
HENSOTHERM fire protection paint is an insulating coating for wood according to DIN 4102 Part1. When exposed to heat, it forms a heat-insulating foam layer on endangered wooden surfaces such as in the engine room or galley of wooden yachts and traditional ships. HENSOTHERM is already approved as a fire protection system on numerous traditional ships.HENSOTHERM 1KS is colorless and is only suitable for basically dry interior areas. For a colorless, transparent coating in these areas, the wood is first primed with wood primer AQ to minimize absorbency. Then the insulating HENSOTHERM 1KS is applied and finally sealed with the topcoat HENSOTOP 84AF to achieve a certain abrasion resistance.In areas on board where high humidity or condensation can occur, the waterproof, gray, exterior paint HENSOTHERM 2KS must be used and afterwards sealed with the waterproof, white topcoat HENSOTOP SB. HENSOTOP SB is available in a wide range of colors on request and at extra cost. Unfortunately, transparent fire protection in areas subject to moisture is not possible.

From €101.99 *
GLORIA P6PRO 6 kg powder fire extinguisher with MED approval
Proven universal extinguisher for class A, B, and C fires, pursuant to DIN 14406 with certification from SeeBG.Features:Plate-steel bracket, protected with plastic,inner gas bottle and impact head fitting,testable,refillable,hose with suppressible extinguishing nozzle for measured use,Spray width 6 - 7 m,filled with GLUTEX extinguishing powder.Comes with simple wall bracket.A vibration resistant marine bracket is also available on demand.

€112.90 *
GLORIA carbonic acid fire extinguisher
Special fire extinguisher for fire class B (flammable liquid substances).Features:Aluminum container, plastic coated,testable and refillable,filled with liquid carbon dioxide - leaves no residue when used.GLORIA CO2 extinguishers have the approval of SeeBG.The 2 kg extinguisher is supplied with a wall bracket.The 5 kg extinguisher is supplied with a simple wall hook, a vibration-proof ship's bracket is available as an accessory.

From €99.50 *
Fire plaid
Made from heat-resistant fiberglass cloth.Size 100 x 100 cm.Comes in a practical storage box.

€27.91 *
Gloves fire resistant
Fire-protection item: fireproof protective glove for onboard firefighting.Pursuant to the equipment regulations in the "safety policy for traditional ships, attachment 1.11".

€47.90 *
Small axe
Small hand axe.Red lacquered head with a sharpened cutting edge on the one and a lever blade on the other side.The oval, insulated shaft of steel tube is force fitted into the head.

€49.90 *
Fire axe
Classical fire axe in very strong professional quality.Red painted head with a sharpened cutting edge on the one and a lever blade on the other side.Oval shaft from ash wood, varnished transparent.The head is secured with two ring wedges and two tapered collars.Pursuant to DIN 149000 FA.

€59.90 *
Branchpipe
Nozzle pipe made from strong aluminium. With a STORZ C coupling and additional water curtain. Nozzle diameter 12 mm. The nozzle pipe has a water flow of 345 l/min. Throw distances:full jet 27 m, spray jet 11 m. Fire-protection item pursuant to the guidelines in "Improving the safety of traditional ships.".

€125.00 *
Safty line, fire resistant 30m*10mm
Fireproof safety rope (flame protection rope).Diameter 10 mm, length 30 m, with knotted thimble and snap hook. Colour: signal orange.The line has a guaranteed strength of 3.5 kN (350 daN) over five minutes of use in the seat of a fire.MED/SOLAS approval (No. 210004-00) by BG Verkehr, Dienststelle Schiffssicherheit. The EC-Type Examination Certificate (PDF download below) and instructions for use are enclosed with the line.

€167.90 *
GLORIA FS-6/EK plastic fire extinguisher protective cover
The GLORIA FS-6/EK all-plastic fire extinguisher protective cover is ideal for protecting portable fire extinguishers. The protective cover can be mounted on the wall.The upper part is made of crystal-clear PETG plastic. The gray lower part is made of PS-PE material and is 3 mm thick.The back section is equipped with two tension locks and two grip grooves. The closures can be sealed.Temperature resistant from -20 ºC to 60 ºCSupplied without fire extinguisher.The following GLORIA devices fit into the FS-6/EK hood6 kg powder fire extinguisherPD6, P6 EASY, PH6 EASY, P6 Pro6 l foam fire extinguisherSE 6P, SK6P, SH6P6 l water fire extinguisherWH6PExternal dimensions (H x W x D): 620 x 320 x 210 mmInternal dimensions (H x W x D): 580 x 265 x 160 mmWeight: 1,390 g

€59.90 *