HAMMAR TR-0001 Senhouse sliphook life raft with/without HRU

Double pipe clamp made of stainless steel (INOX A2), optionally with swivel or fixed.The pipe clamp is designed for a pipe diameter of 25 mm.It can be used, for example, to attach a liferaft bracket (see ‘Accessories’) to the pushpit or a solid railing. Four pipe clamps are recommended for this.The double pipe clamp can also be used in many other ways: for example, for laying (aerial) cables on the pushpit or along the railing. Or for attaching an equipment carrier (for solar panels) to the pushpit.

The HAMMAR H20R is the most widely used water pressure release device (Hydrostatic release unit - HRU) for life rafts.HAMMAR H20R (HR-0100) - Complete with replacement strap for lashing and "weak link" attachment eye for the release line of the life raft. Yellow stickers. MED approval (see "Downloads").HAMMAR H20R (HR-0200) - For "small" life rafts (4 to 12 persons) as an alternative without MED approval. Green stickers.Approval period: Two years from installation (the corresponding marking is made on board during installation).The hydrostatic release unit releases the lifesaving equipment when the ship sinks. A spring-loaded knife automatically cuts the lashing of the life raft at a water depth of 1.5 - 4 meters, allowing it to float freely.

HAMMAR HR-0500 manual release hook made of stainless steel for attaching the liferaft. The hook can be used alone or in conjunction with a hydrostatic release unit (HRU), such as the HAMMAR H20R. The quick-release hook is inserted into the lashing loop (see video) and allows the webbing strap that secures the island in its holder to be pulled through tightly. In an emergency, the hook can be released quickly by hand so that the life raft can be thrown into the water. To do this, the safety split pin is pulled out, which can be done with one hand even with a heavy lashing load. If the liferaft can no longer be released manually before the ship sinks, the hydrostatic release unit (HRU) takes over. At a water depth of 1.5 - 4 metres, a spring-loaded blade automatically cuts through the lashing of the liferaft, which then slips out of the manual release hook. This allows the raft to float freely. A longer connecting wire to the lashing and the safety pin are available as accessories. Please ask us about them. Technical features Made of Stainless steel Dimensions: 85 x 170 x 102 mm Weight: 205 g Maximum working load: 15 kN

Senhouse sliphook HAMMAR TR-0001 made of stainless steel for attaching the liferaft. The hook can be used alone or in conjunction with a hydrostatic release unit (HRU), such as the HAMMAR H20R.The Pelikan hook is attached to the swap strap (see photos) and allows the webbing that secures the liferaft in its holder to be pulled through tightly. In an emergency, the hook can be quickly released by hand so that the life raft can be thrown into the water.If this was no longer possible before the ship sank, the life raft is released by the hydrostatic release unit. At a water depth of 1.5 - 4 metres, a spring-loaded knife automatically cuts through the lashing of the life raft, which then slips out of the senhouse sliphook. This allows the raft to float freely.Technical featuresStainless steelLength: 195 mmWeight: 200 gMaximum working load: 15 kN

The LALIZAS HRU hydrostatic pressure release is manufactured in Greece from glass fiber-reinforced nylon.The mechanism is automatically activated in the event of sinking at a depth of between 1.5 and 4 m, so that the life raft can be inflated and separated from the sinking vessel.can be inflated and separated from the sinking ship.The HRU can be used for all life rafts for 4-150 persons.Approval period: 2 years from installation (the corresponding marking is made on board upon installation). SOLAS/MED/USCG-MER and TC approval (see under "Downloads").

The LALIZAS LRL (Life raft light) is a compact life raft light that can also be used in lifeboats.The power unit consists of the lithium battery and an LED light as interior lighting. It is completely sealed and therefore waterproof. The internal continuous light has a light intensity of at least 0.5 cd.The external flashing light can also be connected to the battery using the one metre long cable. The light can be stuck onto PU and rubber. It produces a light of at least 4.3 cd.Both lights can be switched on and off individually via the power unit.The minimum operating time is twelve hours. The lamp(s) can be stored and operated in the temperature range -30 to +65 °C. The battery life is five years.The lamps have MED and USCG approval (see ‘Downloads’).

Sturdy universal model of a liferaft holder.The length of the side sections is infinitely adjustable, allowing the holder to be used for various container sizes from different manufacturers. The length of the container can be between 640 and 840 mm. The minimum width is 400 mm.The bracket is cleanly manufactured from A4 stainless steel tubing (AISI 316) with a diameter of 25 mm.The four robust stainless steel clamps with matching screws supplied allow the bracket to be securely mounted on deck.There are only two fixing points for attaching to the pushpit or railing. With at least two additional double pipe clamps (see ‘Accessories’), the bracket can be attached much more securely to the pushpit.The liferaft container is held in the holder by a stainless steel strap. The tension lock on the strap can be locked (in the harbour) with a padlock (included in the scope of delivery).The illustration may differ slightly from the article.

Special mounting rack for our VIKING life rafts.Through the use of polished stainless steel 5mm V4A flat steel it needs very little space.Mounting is possible on deck or with the additional available set of fittings also on a guard rail tubing or the stern pulpit.Shipping with strap and rip-off hook.

6-person life raft for pleasure craft or fishing boats in coastal areas.A VIKING quality product made in Denmark! The liferaft exceeds the ISO 9650-2 standard. The liferaft contains an ISO 9650-2 coastal emergency kit with all the items needed in an emergency near the coast. The natural rubber used does not smell anywhere near as pungent as the materials used by other manufacturers.Features:Complies with the ISO 9650-2 standardThe liferaft is very lightFabric access ramp for easy entryMade from a special, particularly robust natural rubberequipped with two separate air chambers, each with enough buoyancy to carry the number of people the life raft is designed fora fluorescent yellow cover ensures increased visibility from a distanceautomatically opening canopyfour fast-filling 60 litre ballast bags provide maximum stabilitytwo swallow neststwo viewing windows for better ventilation and a view of the horizonAvailable in a water-repellent bag or in a rigid container.Delivery time approx. 1 - 4 weeks, depending on the supplier's stock.You will find a solid deck bracket and fittings for mounting on the railing further down on this page under "Accessories".It is recommended that VIKING's RescYou liferafts are serviced every three years. Please also observe the locally applicable guidelines.

VIKING's RescYou OCEAN liferaft is ideal for blue water sailing, suitable for inshore, offshore and fishing. A quality product made in Denmark!Large access openings and oversized zips make it easy to enter the liferaft when evacuating the boat. Elements such as the large ballast bags, automatic interior lighting and an insulated floor offer maximum comfort until help arrives. The natural rubber used does not smell anywhere near as pungent as the materials used by other manufacturers.Features:Complies with ISO 9650-1 and ISAF standards and has been independently testedThe fluorescent yellow cover ensures increased visibility from a distance2 viewing windows provide better ventilation and a view of the horizonLarge entry for easy and safe evacuation from the water, direct access from the boat and for helicopter rescueFabric boarding ramp and step loop to get out of the water and into the islandEasy-to-use zip fasteners for freeboard enlargementFive separate air chambersFloating anchor, lifebuoy, buoyant knifeLife lines inside and outside, righting lineFour fast-filling 60 litre ballast bags provide maximum stability and prevent the life raft from capsizing in heavy seasEquipped with reflective, high-visibility tape in accordance with SOLASAutomatic SOLAS/USCG RKL light and interior lightingInsulated floor for additional thermal insulationWith ISO II equipment kit (rescue <24 hours)The large drift anchor reduces the displacement of the liferaftAvailable in sizes for 4, 6 or 8 people.Available in a water-repellent bag or in a fixed container.Delivery time approx. 1 - 4 weeks, depending on the supplier's stock.A solid deck bracket and fittings for mounting on the railing can be found further down on this page under "Accessories". There you will also find GrabBags to complete the equipment of the raft for an expected rescue time >24 hours.It is recommended that VIKING's RescYou liferafts are serviced every three years. Please also observe the locally applicable guidelines.

VIKING's RescYou-Pro liferaft is ideal for extreme blue water sailing, where comfort and safety go hand in hand. A quality product made in Denmark!Large access openings and oversized zips make it easy to enter the liferaft when evacuating the boat. Elements such as the large ballast bags, automatic interior lighting and an insulated floor offer maximum comfort until help arrives in the event of an emergency at sea. The natural rubber used does not smell anywhere near as pungent as the materials used by other manufacturers.The ultra-fast and reliable self-righting function has been adopted from the VIKING SOLAS liferafts and sets the liferaft upright in seconds. This, the entrances on both sides and the large amount of space available make the VIKING RescYou-Pro an absolute top product.Features:Complies with ISO 9650-1 and ISAF standards and has been tested by independent providersTwo large entrances for easy and safe evacuation from the water, direct access from the boat and for helicopter rescueFabric boarding ramps and step loops to get out of the water and into the islandNew fluorescent yellow cover for increased visibility from a distanceNew viewing windows for better ventilation and view of the horizonEasy-to-use zips for freeboard enlargementFive separate air chambersFloating anchor, lifebuoy, buoyant knifeLife lines inside and outside, righting lineFour fast-filling 60 litre ballast bags provide maximum stability and prevent the life raft from capsizing in heavy seasFitted with reflective, high-visibility tape in accordance with SOLASAutomatic SOLAS/USCG RKL light and interior lightingInsulated floor for additional thermal insulationWith ISO II equipment kit (rescue <24 hours)The large drift anchor reduces the displacement of the liferaftAvailable in sizes for 4, 6 and 8 people.Available in a water-repellent bag or in a fixed container.Delivery time approx. 1 - 4 weeks, depending on the supplier's stock.You will find a solid deck bracket and fittings for mounting on the railing further down on this page under "Accessories". There you will also find GrabBags to complete the equipment of the island for an expected rescue time >24 hours.It is recommended that VIKING's RescYou liferafts are serviced every three years. Please also observe the locally applicable guidelines.

Simple rack for life rafts made from plastic to be screw mounted on deck. Shipping with 2m long belt straps, width of the belt strap (B1) is 30mm.

PLASTIMO CRUISER liferaft for long-distance cruising in coastal waters.The liferaft for 4 or 6 persons is optionally available in a flexible carrying bag (for stowing below deck, in the cockpit, in the forecastle) or in a GRP container for storage on deck.PLASTIMO has over 40 years of experience in manufacturing products for maritime safety. All liferafts are manufactured in Europe. The CRUISER liferaft was specially developed for coastal waters. A double-shell air chamber ensures special safety. Behind a sturdy outer protective tube is the actual air tube. All fastenings are welded, sewn or glued to a high standard.The liferaft is deployed 10% by hand and 90% by the existing gas pressure. Even a weakened person can deploy a PLASTIMO liferaft.  Important features:Double-shell construction of the air hoses (outer hose PVC-Decitex-fabric, inner hose PP-foil)safe floating position due to lead-proof capsize tubesboarding aidRainwater collection systememergency light on the roofpatented ignition head with servo supportextensive emergency equipment (for rescue within 24 hours)The maintenance interval is three years. With regular maintenance, the liferaft can remain operational for up to 18 years. Maintenance is possible worldwide by contractual partners trained by PLASTIMO.  Delivery time approx. 1 - 4 weeks, depending on the supplier's stock.Please ask for the detailed brochure (Info No. 13). It is also available as a PDF file under "Downloads & Information" further down on this page.Alternatively, we would be happy to offer you a liferaft from another brand manufacturer such as VIKING, SECUMAR or ZODIAC. Just ask us about it.

TRANSOCEAN ISO / ISAF Life Rafts are equipped pursuant to ISO 9650-1 and ISAF,and are thus intended for use even in extreme conditions. In addition to the basic equipment,it has isolated double floors, accurate activation to -15°C, entry ramp, extensive emergency and signaling equipment and more. PLASTIMO has over 40 years experience in making marine-safety products. All life rafts are made in Europe.The following equipment features are included on all life rafts: - Double-hull system with a seawater-resistant, highly elastic polyurethane inner hull and an extremely resistant PVC-1100 Decitex outer hull. - Patented servo mechanism to simply and safely open the gas supply. - Stable floating position, even in high winds and waves, through exceptionally large, lead-filled ballast bags. - Packed in a vacuum so that the life raft is better protected. - 3-year maintenance can be carried out by partners located worldwide. - With regular maintenance the PLASTIMO rafts can be used for up to 18 years- Basic emergency gear comes in every life raft. Delivery time 1 to 4 weeks, depending on supplier's stock.

Viking Grab Bag with additional emergency equipment for the liferaft.This extends the Emergency Pack 2 (<24 hours - expected rescue within 24 hours) to Emergency Pack 1 (>24 hours - expected rescue after more than 24 hours).The VIKING life raft RescYou OCEAN and RescYou PRO is equipped with the emergency equipment of Emergency Pack 2 in accordance with ISO 9650-1 (offshore life rafts) as standard.Especially before long, demanding passages, it makes sense to supplement the emergency equipment to the extent of Emergency Pack 1. Emergency Pack 1 equipment is mandatory for participation in events such as the Atlantic Rally for Cruisers (ARC).The grab bag is stowed on board in an easily and quickly accessible place near the life raft so that it is not forgotten in an emergency.The waterproof, signal orange grab bag contains the following items of equipment.3x SOLAS-approved red handflares1x SOLAS-approved flashlight1x spare batteries and bulb for SOLAS flashlight1x SOLAS approved first aid kit2x SOLAS approved thermal protective aid (TPA)1x 200 ml sunscreen2x 0.5 l of drinking water in bags per person (SOLAS). So a total of 4 litres in the 4-person grab bag. 6 or 8 litres in the Grab Bags for 6 or 8 people0.5 kg of emergency ration (10,000 kJ) per person (SOLAS). This means a total of 2 kilograms in the 4-person Grab Bag. 3 or 4 kg in the Grab Bags for 6 or 8 people