Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Check valve WHALE

1929*05 Rückschlagventil WHALE Kunststoff

€15.90*

€15.90*

Prices incl. VAT plus shipping costs

description
version
model
for tube-Ø (mm)
Stk

Small, spring-loaded ball check valve especially for drinking water hand pumps.
The valves are installed directly in the suction hose (13 mm), as close as possible to the tank.

It makes sense to install the valve if there is a problem with backflow into the fresh water tank and water has to be pumped for a long time until it flows out of the tap.

Cannot be used in pressurised water and bilge pump systems.

Show article
📖 View article in the TOPLICHT catalogue
Questions about the product?

Similar products

Non return valve from TRUDESIGN
Non return valve from TRUDESIGN
Non return valve made from glass fibre reinforced composite plastic fitted on both ends with a hose connector.The valve plug is made from nylon with a stainless steel spring, the length is 85 mm.Suitable for fresh water pipe systems. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €13.90 *
Details
PVC hose (food safe)
PVC hose (food safe)
Transparent PVC hose with cross-fabric insert of polyester yarn.Food safe, resistant to chemicals and oil.Temperature resistant from -5°C to +60°C.Also intended for pressurized water systems.

From €2.50 *
Details
WHALE galley pump FLIPPER Mk4
WHALE galley pump FLIPPER Mk4
Self-priming, smooth-running piston pump made from plastic.Twisting spigot, Maximum flow rate 7 l/min.Made for fresh water and sea water.Tube coupling 13mm.Spare parts kit is Art-Nr. 4602-101.

€112.00 *
Details
WHALE Galley Pump MK6
WHALE Galley Pump MK6
Self-priming, perfectly smooth-running piston pump.Piston and spigot are made from aluminium. Height adjustable from 90 to 250 mm.Utilizing the small mounting base the pump can easily be installed between two sinks.Spigot length 125mm. Tube coupling 13 mm.Maximum flow rate 8 l/min.Qualified for fresh and salt water.Spare parts kit Art-Nr. 4609-100.

€72.90 *
Details
Check valve WHALE LV1219
Check valve WHALE LV1219
Made of glass fibre reinforced PP plastic with high-quality nitrile lip valve. Suitable for bilge water systems or hand and electric bilge pumps.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

From €29.90 *
Details
Non return valve WHALE
Non return valve WHALE
Made of glass fibre reinforced PP plastic with high-quality nitrile lip valve. Suitable for bilge water systems or hand and electric bilge pumps.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

€35.90 *
Details
Check valve PLASTIMO
Check valve PLASTIMO
Plastic non-return valve with oil-proof nitrile rubber valve. Suitable for bilge water systems or hand and electric bilge pumps.The valve housing is easy to open (for maintenance). In narrow spaces, the straight gland can be replaced with an angled one.Entire length 185mm.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

From €6.90 *
Details
Non return valve JABSCO
Non return valve JABSCO
Non return valve made from plastic by the global market leader JABSCO with hose connectors on both ends and a check valve made from Nitrile rubber.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

From €35.90 *
Details
WHALE water filter AQUASOURCE
WHALE water filter AQUASOURCE
Slim, compact activated carbon filter unit from WHALE.The AQUASOURCE CLEAR WF 1230 drinking water filter removes turbidities and bad taste through the filtering out of organic substances, chlorine and heavy metals.Mounting on the pressure side of any type of water pump. Maximum pressure: 6 bar.Comes with two clip brackets for simple change.Life 1 year or 4500 litres.13 mm hose attachments on both sides.Dimensions: D = 50 mm, length 300 mm.

€52.00 *
Details

More products from the category Check valves & bilge strainers

Bilge strainer WHALE
Bilge strainer WHALE
With integrated check valve for hoses of 25 mm and 38 mm.With sieve on the onboard side.

€35.90 *
Details
Bilge strainer WHALE MULTI
Bilge strainer WHALE MULTI
Bilge strainer with check valve, easy to clean.With 19 mm hose connector.The connector can be mounted in three directions: standing, horizontal, sideways.

€64.90 *
Details
Bilge strainer WHALE standing
Bilge strainer WHALE standing
With integrated check valve for hoses of 25 mm and 38 mm.With sieve on the outboard side.

€35.90 *
Details
Brass bilge water strainer
Brass bilge water strainer
Special brass, with non-return valve, strainer can be unscrewed.

From €21.00 *
Details
Brass check valve
Brass check valve
Brass check valve, spring operated.To be fitted in the tube to prevent reflux of water.With inner threads on both sides. Strong body of brass, valve cage of nylon, spring of A2 stainless steel, seal of nitrile rubber.The valve works in any installation situation.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €10.90 *
Details
Brass screw-in sieve filter with stainless steel sieve
Brass screw-in sieve filter with stainless steel sieve
Screw-in sieve filter consisting of a brass body with an inch external thread and a sieve made of A2 stainless steel.Good for protecting the pump from coarse impurities when drawing in outside water or bilge water. Depending on the intended use, we recommend screwing the suction basket into a standpipe, a pipe-to-hose fitting or a non-return valve. See the example photos with corresponding accessories (not included in the scope of delivery).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €6.90 *
Details
Check valve PLASTIMO
Check valve PLASTIMO
Plastic non-return valve with oil-proof nitrile rubber valve. Suitable for bilge water systems or hand and electric bilge pumps.The valve housing is easy to open (for maintenance). In narrow spaces, the straight gland can be replaced with an angled one.Entire length 185mm.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

From €6.90 *
Details
Check valve WHALE
Check valve WHALE
Small, spring-loaded ball check valve especially for drinking water hand pumps.The valves are installed directly in the suction hose (13 mm), as close as possible to the tank.It makes sense to install the valve if there is a problem with backflow into the fresh water tank and water has to be pumped for a long time until it flows out of the tap.Cannot be used in pressurised water and bilge pump systems.

€15.90 *
Details
Check valve WHALE LV1219
Check valve WHALE LV1219
Made of glass fibre reinforced PP plastic with high-quality nitrile lip valve. Suitable for bilge water systems or hand and electric bilge pumps.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

From €29.90 *
Details
Non return valve from TRUDESIGN
Non return valve from TRUDESIGN
Non return valve made from glass fibre reinforced composite plastic fitted on both ends with a hose connector.The valve plug is made from nylon with a stainless steel spring, the length is 85 mm.Suitable for fresh water pipe systems. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €13.90 *
Details
Non return valve JABSCO
Non return valve JABSCO
Non return valve made from plastic by the global market leader JABSCO with hose connectors on both ends and a check valve made from Nitrile rubber.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

From €35.90 *
Details
Non return valve WHALE
Non return valve WHALE
Made of glass fibre reinforced PP plastic with high-quality nitrile lip valve. Suitable for bilge water systems or hand and electric bilge pumps.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

€35.90 *
Details
RM69 non-return valve RM825 38 mm
RM69 non-return valve RM825 38 mm
The RM69 RM825 check valve is made of plastic and designed for hose lines in onboard water and bilge pump systems. It is suitable for hose connections with an internal diameter of 38 mm and comes in white. Function by means of a nitrile lip valve. Check valves are installed in the suction hose, support priming, and prevent water backflow

€29.00 *
Details

Zuletzt angesehene Artikel