RHEINSTROM deck wash and bilge pump type 4E | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	description	voltage (V)	current (A)	output	L (mm)	B (mm)	height (mm)	Price (unit)	Delivery time	Note list	Buy

Description

This self-priming bilge and deck wash pump is suitable for delivering sea water. It is completely made of bronze and stainless steel. Due to its hard-wearing industrial motor a longlasting and reliable operation is guaranteed. Before it is run for the first time it has to be filled with water. Furthermore it is advisable to install a socket safety valve or a foot operated valve into the suction pipe. The pump is non-reactive to sand (particle size up to 2 mm). The model 4 E is totally maintenance-free due to the use of a freely running impeller wheel and a very modern axial face seal. The max. operating time is 1 – 2 hours

Technical data
Output:
50 l/min
Height pumped: 13 m
Suction lift: 3 m
Attachment: 3/4" BSP with inner threads
Weight: 7 kg

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Brass check valve

Brass check valve

Brass check valve, spring operated.To be fitted in the tube to prevent reflux of water.With inner threads on both sides. Strong body of brass, valve cage of nylon, spring of A2 stainless steel, seal of nitrile rubber.The valve works in any installation situation.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €10.90 *

Bronze pipe-to-hose fitting

Bronze pipe-to-hose fitting

Bronze pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €7.65 *

Seawater-resistant bronze angle 45°

Seawater-resistant bronze angle 45°

45° angle with inner and outer threads. High quality seawater-resistant bronze fitting. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!

From €6.90 *

Seawater-resistant bronze angle 90°

Seawater-resistant bronze angle 90°

90° angle with inner and outer threads. High quality fitting made from seawater-resistant bronze alloy. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!

From €7.90 *

T-bolt clamp

Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *

Multiflex hose PVC

Multiflex hose PVC

Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *

Centrifugal pump JABSCO

Centrifugal pump JABSCO

JABSCO centrifugal pumps CYCLONE are strong and durable pumps made from stainless steel, suitable as circulation pump for heating systems, ballast tank systems, cooling water or seawater, diesel or chemicals over a temperature range of +4° to 95°C.They are available as high efficiency pumps (type 50840) with up to 110 l/min power for continuous operation or as high pressure pumps (type 50860) for the temporally limited usage (30 min maximum) with pressure of up to 1,6 bar.Connection thread 3/4" BSP.Four rubber puffer pads in the base plate ensure a quite and vibration free operation.Centrifugal pumps are not self-priming, they must therefore be installed in such a way, that the flow of the pumped medium is guaranteed.

From €499.00 *

Impeller pump JABSCO UTILITY-PUPPY 2000

Impeller pump JABSCO UTILITY-PUPPY 2000

Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).

From €439.00 *

Impeller pump 230V JABSCO UTILITY

Impeller pump 230V JABSCO UTILITY

The self-priming 230 V multi-purpose pump JABSCO 53040 UTILITY is a portable pump for filling, pumping out and transferring fresh, salt, and bilge water.The pump is made from bronze, the impeller from oil-proof nitrile rubber, the shaft from stainless steel with a carbon-ceramic mechanical shaft seal. The compact pump can be deployed in multiple ways with its practical handle, is rapidly self-priming from dry up to 4m and will handle hard or soft solids.Air cooled alternate current motor 230 V / 50 Hz, protection class IP55, 0,25 kW at 1400 rpm. With built-in dry-running protection for up to 30 minutes after initial prime

€1,079.00 *

Impeller Pump 220 Volt MARCO UP1/AC

Impeller Pump 220 Volt MARCO UP1/AC

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. AISI 316L. Voltage: 230V-50Hz.Consumption: 3,3 A.Fuse: 4 A.Selfpriming up to 1,5 m height.Flow rate: 30l/min.Pressure: 1 bar.Ports: 1/2" Innengewinde (BSP) or hose diameter: 25 mm.Motorpower: 550 W.Weight: 7,3 kg.Also available for 12 volt or 24 volt. See under similar products.

€369.90 *

RHEINSTROM diaphragm pump M50E

RHEINSTROM diaphragm pump M50E

Very powerful, self-priming electrical diaphragm pump with reliable industrial motor.This Rheinstrom diaphragm pump has been found to be very reliable over many years. It can be used as a bilge pump, a grey water pump and a delivery pump.Constant delivery rate, high safety against clogging, very good cleaning possibilities.Made of hard-wearing materials, the body is made of seawater-proof cast bronze.Fast and easy cleaning and maintenance and direct access to the valves are obtained by simply opening the lid of the pump. The discharge and suction side may be altered.Technical dataPump performance: 40 l/minDelivery head: 10 mSuction height: 3,5 mConnection: 38 mm hose connectionMotor: 110 WWeight: 9,5 kgA repair kit is available.

From €990.00 *

Electric diaphragm pump

Electric diaphragm pump

The self priming membrane type pump is especially suitable for pumping polluted liquids, such as toilet waste, bilge water.The robust pump casing is wholly made from plastic and is equipped with rotatable connectors with sleeves, which can easily be demounted. These contain tube valves.This construction guaranties a very flexible mounting, little danger of blockage and simple cleaning of the pump.The strong electric motor is capable of continuous operation. Pump capacity: 27 l/min Maximum suction height:: 3 m Maximum delivery height: 5 m Housing material: plastic, black Membrane material: neoprene rubber Valve material: natural rubber Current draw for 12 V DC 8 AMP Current draw for 24 V DC 5 AMP Hose fittings for 38 mm Weight: 3,7 kg Mesurements: 300 x 320 x 220 mm

From €449.00 *

Bilge water filter (oil strainer) WAVESTREAM

Bilge water filter (oil strainer) WAVESTREAM

The MARPOL Convention prohibits the discharge of oily wastewater into the sea. This filter removes the oily substances from the pumped bilge water by a patented filter system, so that the bilge water can be pumped out almost without oil residues and the water pollution is minimized.The filter is installed behind the bilge pump and in front of the ship's passage. It is suitable for oil residues, large dirt must be removed from the bilge before.Supplied with a stainless steel wall mounting plate.Replacement filter cartridges are available, annual replacement is recommended.LLOYD'S REGISTER Type Approved.

From €179.00 *

More Products from Category Bilge pump & submersible pump

Bilge pump FLOJET QUAD 4125

Bilge pump FLOJET QUAD 4125

High-performance bilgepump without pressure switch, laid out as a four-chamber membrane pump.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 19 mm hose nozzle, plug with 3/4" male thread.We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).Comes with wide-mesh screen.

€279.00 *

Bilge pump MARCO

Bilge pump MARCO

High-performance bilge pump, available in various sizes for 12V or 24V systems. Discharge head up to 3 m.The snap-off plastic housing can be opened easily for maintenance and cleaning. Low power requirements.Stainless-steel shaft with a high-quality seal.Built in Italy by MARCO.

From €37.95 *

Bilge pump RULE AUTOMATIC

Bilge pump RULE AUTOMATIC

The proven bilgepump from the US manufacturer RULE. Plastic housing with easily removable sieve baseplate. Quiet-running and fully encapsulated motor. Also made as an automatic pump: Type: RULE-AUTOMATIC (RA) works through an automatic microprocessor that checks if there is water in the bilge by briefly running the pump every 150 seconds (without a mechanical switch). Limited power requirements for the test runs: Only approx. 0.2-0.5 Ah per day.

From €135.01 *

Bilge pump RULE MATE

Bilge pump RULE MATE

The proven automatic bilge pump, from US manufacturer RULE.Plastic housing with easily removable sieve baseplate.Quiet and fully encapsulated motor, stainless axis.Can be used as an automatic pump:Type RULE-MATE (RM) is controlled with an integrated electronic switch. Supplied with straight hose nozzles for 25 and 28 mm.

From €129.00 *

Bilge pump WHALE ORCA

Bilge pump WHALE ORCA

Submersible bilgepump with strong permanent magnet motor and special shaft seals.The outer cover can be removed for inspection.Shaft of rust-free steel.These pumps are only partially protected against dry-running, so the installation of the optional floating or sensor switch is recommended.

From €39.90 *

Electric diaphragm pump WHALE GULPER 220

Electric diaphragm pump WHALE GULPER 220

WHALE GULPER type 220: Electric membrane pump for pumping the bilge or emptying the head or holding tank (grey water pump). Self-priming. Suction lift max. 3 m, dicharge head max. 3 m, combined suction lift / discharge head max. 4m.Odorless running, vibration absorbing rubber feet.Universal installation due to swiveling pump heads.For tube 19mm. Weight 1.5 kg. Dimensions: L x W x H = 273 x 111 x 117 mm. Spare-parts sets available.

From €198.00 *

Electric diaphragm pump WHALE GULPER 320

Electric diaphragm pump WHALE GULPER 320

WHALE GULPER type 320: Electric membrane pump for pumping the bilge or pumping out the head or holding tank (grey water pump). Self-priming. Suction lift max. 3m, dicharge head max. 3 m, combined suction lift / discharge head max. 4m.Odorless running, vibration absorbing rubber feet.Universal installation due to swiveling pump heads.A variable tube adaptor connects the GULPER 320 to 19mm or 25mm tube. Weight 1.6 kg. Dimensions: L x W x H = 273 x 111 x 117 mm. Spare-parts sets available.

From €259.00 *

Grey water and bilge diaphragm pump JABSCO 50880

Grey water and bilge diaphragm pump JABSCO 50880

A new generation of diaphragm pump in the one compartment design by pump specialist JABSCO.Ideal for the draining of shallow bilges and shower drains.Maintanance is simplified by the filterless design and the pump is indeed free of clogging.Characteristics:Flow rate: Nominal 16 Litres/min. Self-priming from dry up to 3m (10ft) Flexible installation Dry running capability

From €209.90 *

Impeller pump JABSCO UTILITY-PUPPY 2000

Impeller pump JABSCO UTILITY-PUPPY 2000

Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).

From €439.00 *

Impeller Pump MARCO UP1

Impeller Pump MARCO UP1

Self-priming electric water pump with with nitrile rubber impeller. The pump body is made of nickel-plated brass. The pump is dry self-priming up to 1.5 m height.The connections have a BSP female thread. A direct hose connection to the connection pieces is also possible.Available in two power ratings for 12 or 24 volts.Also available for 220 volts, see matching items. See similar articles.

From €134.01 *

RHEINSTROM deck wash and bilge pump type 4E

RHEINSTROM deck wash and bilge pump type 4E

This self-priming bilge and deck wash pump is suitable for delivering sea water. It is completely made of bronze and stainless steel. Due to its hard-wearing industrial motor a longlasting and reliable operation is guaranteed. Before it is run for the first time it has to be filled with water. Furthermore it is advisable to install a socket safety valve or a foot operated valve into the suction pipe. The pump is non-reactive to sand (particle size up to 2 mm). The model 4 E is totally maintenance-free due to the use of a freely running impeller wheel and a very modern axial face seal. The max. operating time is 1 – 2 hoursTechnical dataOutput:50 l/minHeight pumped: 13 mSuction lift: 3 mAttachment: 3/4" BSP with inner threadsWeight: 7 kg

From €916.00 *

RHEINSTROM diaphragm pump M50E

RHEINSTROM diaphragm pump M50E

Very powerful, self-priming electrical diaphragm pump with reliable industrial motor.This Rheinstrom diaphragm pump has been found to be very reliable over many years. It can be used as a bilge pump, a grey water pump and a delivery pump.Constant delivery rate, high safety against clogging, very good cleaning possibilities.Made of hard-wearing materials, the body is made of seawater-proof cast bronze.Fast and easy cleaning and maintenance and direct access to the valves are obtained by simply opening the lid of the pump. The discharge and suction side may be altered.Technical dataPump performance: 40 l/minDelivery head: 10 mSuction height: 3,5 mConnection: 38 mm hose connectionMotor: 110 WWeight: 9,5 kgA repair kit is available.

From €990.00 *

RULE LO-PRO Submersible Bilge Pump LP900D / LP900S

RULE LO-PRO Submersible Bilge Pump LP900D / LP900S

Flat, powerful bilge pump for tight spaces with freely adjustable hose outlet (vertical/horizontal) for 3 different hose diameters (19, 25 and 28 mm). All hose nozzles have lip check valves, the motor unit is removable for cleaning, maximum pumping height is 3.4 m.Pumping capacity: 3373 l/h at the same level.2400 l/h at 1 m height difference (1 mWS).Available as standard pump (type LP900D) or as automatic pump (type LP900S) with integrated sensor switch.The sensor has 3 switching modes: in mode "L" the pump switches on at a water height of 33 mm, in mode "H" at 50 mm, in mode "Time" the pump checks every 150 seconds by a short start if water is present and then pumps until the bilge is empty.

From €69.00 *

Small bilge pump WHALE SUPERSUB

Small bilge pump WHALE SUPERSUB

Extremely low-profile, submersible pump with good power, by the renowned pump manufacturer WHALE, which can also be placed between frames and floor boards.Removable sieve, outflow hose adjustable from horizontal to vertical.Article 1441-111 comes with a non-return valve. Versions:SUPERSUB 5012 has a max. pump output of 32 l/min and 25 l/min at 1 meter height. , SUPERSUB 1012 has a max. pump output of 66 l/min and 47 l/min at 1 meter height.Also available in the WHALE SUPERSUB SMART version with automatic sensor switch.

From €49.90 *

Small bilge pump WHALE SUPERSUB-SMART

Small bilge pump WHALE SUPERSUB-SMART

Extremely low-profile, submersible pump with good power, by the renowned pump manufacturer WHALE, which can also be placed between frames and floor boards.Equipped with a built in, maintenance free 'electric field sensor' as integrated float switch, removable sieve and non-return valve.Outflow hose adjustable from horizontal to vertical.Versions: SUPERSUB SMART 5212 has a max. pump output of 40 l/min and 34 l/min at 1 meter height. SUPERSUB SMART 1212 and 1224 have a pump output of 66 l/min and 47 l/min at 1 meter height.

From €94.90 *

Submergible bilge pump RULE

Submergible bilge pump RULE

Powerful submersible pump from RULE. The pump is made of sturdy plastic and is ideal for smaller boats due to its light and compact nature.The motor is fully enclosed and runs very quietly. The shafts can not rust and are specially sealed against water penetration.The inlet strainer of the pump can be easily removed to clean the pump. The check valve prevents water from flowing back into the bilge, and the ventilated housing optimally prevents air pockets.A thermal shutdown prevents overheating and protects the pump.Also available as RULE AUTOMATIC (RA) automatic pumps. See under similar products.

From €35.90 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.