Skip to main content


The MARPOL Convention prohibits the discharge of oily wastewater into the sea. This filter removes the oily substances from the pumped bilge water by a patented filter system, so that the bilge water can be pumped out almost without oil residues and the water pollution is minimized.

The filter is installed behind the bilge pump and in front of the ship's passage. It is suitable for oil residues, large dirt must be removed from the bilge before.

Supplied with a stainless steel wall mounting plate.

Replacement filter cartridges are available, annual replacement is recommended.

LLOYD'S REGISTER Type Approved.

Accessories

Filter cartridge for WAVESTREAM bilgewater filters
Accessory for bilge water filter WAVESTREAM.

From €39.90 *
Stainless hose connector with external thread
Cleanly worked stainless steel hose connector.Stainless steel A4, 1.4401 = AISI 316.The indicated thread size in BSP is the nominal size and does not correspond to the thread diameter.

From €5.95 *

Similar products

Oil absorbent cloth ÖCUSORB
These OECUSORB oil-absorbant cloths are made from polypropylene and can absorb up to 25 times their weight in oil and other organic liquids.Simple to handle, hydrophobic, floating, reusable and easy to dispose of. The cloths are ideal for soaking up oil from the bilges of small boats, but are also useful for many other tasks: protection of areas where oil or fuel could spill (for example, deck fills when fueling), water-polution control, cleaning motors and winches, etc.Comes as a cloth, dimensions 33 x 33 cm, weight approx. 30 g.

€3.50 *
Oil sorbent cloth ÖCUSORB
OECUSORB polypropylene oil-absorbant pads.The filling of these pads can absorb up to 25 times its weight in oil and other organic liquids.Simple to handle, hydrophobic, floating, reusable and easy to dispose of.This material is ideal for soaking up oil from the bilge, but also for many other tasks: protection of areas where oil or fuel could spill (for example, deck fills when fueling), water-polution control, cleaning machines, etc.The braided absorbent material is a plastic net bound on both sides with attachment loops; multiple pads can be connected to create an oil barrier.Dimensions: Length, approx. 60 cm; diameter, approx. 20 cm; weight, approx. 400 g.

€33.00 *
Bilge strainer WHALE
With integrated check valve for hoses of 25 mm and 38 mm.With sieve on the onboard side.

€35.90 *
Bilge strainer WHALE
With integrated check valve for hoses of 25 mm and 38 mm.With sieve on the outboard side.

€35.90 *

Last seen products