- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Patented professional hand tool with which the side edges of deck joints can be sanded quickly and effectively. During restoration work, the remains of old joint compound can also be sanded off to create a clean new bonding surface in the joint.
The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and is sanded at an exact 90° angle.
Supplied complete with 6 strips of sandpaper (40 grit), which are also available as replacements.
from €12.90*
€49.00
Prices incl. VAT plus shipping costs
| Art. No. | description | grain | Unit price | Delivery time | Note list | Buy |
|---|
Description
Patented professional hand tool with which the side edges of deck joints can be sanded quickly and effectively. During restoration work, the remains of old joint compound can also be sanded off to create a clean new bonding surface in the joint.
The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and is sanded at an exact 90° angle.
Supplied complete with 6 strips of sandpaper (40 grit), which are also available as replacements.
Downloads
Teakdecking System deck joint sealant SIS440 was developed over 30 years ago by professional teak deck installers. The 1-component, silane-based, moisture-curing deck joint sealant is very suitable for deck joints 3-10 mm wide.The joint sealant flows very well during application and does not shrink during curing. Once cured, it is easy to sand, extremely flexible and highly UV-resistant. A primer is not recommended for teak deck grouting. However, the joints must be sanded well and cleaned with acetone. To avoid 3-edge adhesion, an inlay masking tape is recommended.Properties:Film formation time: 20 - 40 minutes.Elongation at break: 850 %.Shore A hardness: 38-40°,Tensile strength 2.0 mm².Please observe the processing instructions on the data sheets.Important! When using the cartridge, first cut the tip at an angle. Then insert a suitable pointed object into the spout and pierce the film seal generously.
Practical adapter developed by teak deck specialists TDS for the precise filling of deck joints.The grouting aid can be screwed onto standard cartridge nozzles using a self-tapping plastic internal thread. Approx. 10-15 mm of the tip of the cartridge nozzle must be cut off beforehand. The skid-shaped nozzle on the wide underside is inserted into the joint and enables more controlled guidance when applying the joint sealant, saves material and limits the amount of sanding required later. Thanks to its rounded tip, the applicator enables a perfectly rounded joint. With sealing cap. After use, the adapter should be cleaned with a cloth and acetone and then closed with its cap.Available for 4, 5 and 6 mm joints. The corresponding width is marked on the adapter.
Professional joint spacers for installing plank decking, developed by the teak decking specialists at TDS.They make it easier to consistently maintain the desired width of the deck joints. The spacers have a hole and can be secured in the joint with a wood screw (not included) to prevent them from slipping.Package includes 100 pieces.
Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.
Special tape for attaching to the surface of the seam bottom to hinder three-edge adhesion. Rolls of 50 m.
High-quality sanding pad for cleaning, creating a matt finish, or finishing surfaces.You can adjust the finish:lighter but more even abrasion, and thus better paint adhesion.Ideal for intermediate sanding, quick and effective, no need to replace sandpaper, long life.Suitable for hand and machine sanding. Pads: 152 x 229 mm.
Strong scraper with soft ergonomically shaped handle and broad tool edge.For doublehand use. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.
Very slim scraper with soft ergonomically shaped handle and thin tool edge.Delivery with exchangable, reversible, convex sharpened blades of COROMANT carbide steel.Comes with plastic sheath.
Scraper with soft ergonomically shaped handle and middle sized tool edge. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.
Spare blades for BAHCO scraper 625 MINI.Made of COROMANT steel.Different shapes are available and may suit for complicated applications: - triangle blade (25mm) with three sharp edges, - round blade, - teardrop shaped blade with very sharp edge, - pear shape blade with roundish edge (to scrape rounded grooves).
With hardened and sharpened triangular edge, galvanized steel with beechwood handle.Entire length 270 mm.
The material of the 3M BRISTLE DISC, full layer of abrasive grain, is outstandingly adapted for cleaning, finishing, burring and polishing of surfaces.The product structure "all of a piece" prevents single component parts from disintegrating and thereby helps to make the disc more secure than existing products.The high quality cleaning discs do not require high surface pressure to be effective and therefore can last longer.M14 internal thread for the angular grinder, 12.000 rpm max.
Clean & Stripe cleaning discs made by 3M SCOTCH BRITE are outstandingly adapted to remove rust and other oxides, lacquers or growth.Available are two versions:type DG for clamping mandrels (drills) with 4.000 rpm max.and type RD for angular grinders with 10.000 rpm max.They are made up of coarse granular abrasive and an adapted binding agent.Ideal for work on the hull, keel, rudder, propeller et cetera; also appropriate for GRP boats.
Made from tool-grade steel. Hardened cutting edge (50 HRC), sharpened. Cutting edge, 75 mm, length 270 mm, height 65 mm.
Gooseneck blade made of hardened strip steel.The blades are tightened using the sharpening steel.
Combination stone of electro-corundum. Highest quality for water or oil. One side rough, one fine.
Practical handle for hand-sanding. The light plastic handle holds the matching corundum sandpaper (or regular sandpaper). The long sanding surface is used with foam materials that hold their shape and is intended to create an exceptionally good finish. Sanding surface 230 x 80 mm.
This hand sanding block is unfortunately no longer available. The MIRKA hand block (see "Similar products") is a suitable replacement.Practical professional hand sanding block from the well-known abrasives manufacturer HERMES. This sanding block enables precise sanding in corners and angles, even when sanding by hand.The sanding block has a Velcro surface on both sides for non-woven abrasive pads or sanding mesh (e.g. Mikra ABRANET item no. 2383-...). It is made of hard foam on one side and softer foam on the other and is therefore suitable for different surface structures.The matching HERMES hand pads OA708 with tricot have a 280 grit size
Hand sanding block for Velcro sanding discs Ø150 mm. This makes sanding small corners child's play. No slipping of the abrasive thanks to the Velcro connection, durable design
Inexpensive aluminum scraper with grippy soft handle and extra manual knob. Length, 290 mm. Weight, 260 g. Blade of hardened tool-grade steel, 65 mm wide.
The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Round sanding discs, particularly suitable for random orbital sanders. Diameter 125 mm or 150 mm.
The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Sanding strips: 70 x 125 mm or 81 x 133 mm.
The perfect tool for clean, low-fatigue work: the ergonomic shape of the sanding mouse with a particularly non-slip surface makes sanding much easier.The integrated suction unit with regulation greatly reduces the health risks associated with hand sanding in particular.The service life of the abrasive is also significantly longer thanks to the extraction system.Quick abrasive change thanks to Velcro system. Available in two sizes:-Velcro surface 70 x 125mm and round Velcro discs D= 150mmThe matching, very flexible, 4 m long suction hose can be connected directly to any vacuum cleaner thanks to a rubber cone without any additional adapters.
Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.
This cork sanding block is the traditional aid for getting a good flat finish from the sandpaper when hand-sanding.Skin-friendly cork, dimensions: 120 x 60 x 35 mm.
This rubber sanding block is a practical aid for hand-sanding. The sandpaper is held reliably by steel pins. The sanding surface is flat, the grip surface rounded to be user-friendly. Black, sanding surface 130 x 70 mm.
