Go to homepage
€0.00*
Jobs
Catalogue
Quick order

IMP fungicidal impregnating oil

IMP Imprägnieröl
IMP Imprägnieröl
IMP Imprägnieröl

from €37.90*

Content: 1

€37.90*

Content: 1 Liter

Prices incl. VAT plus shipping costs

Available, delivery time: >10 Tage (rot)

In stock

packaging
Ds

IMP Impregnating Oil is a transparent wood impregnation made from a drying alkyd resin oil. Due to its excellent penetration properties, it has a preventive effect against rot and fungal infestation when the wood is impregnated because air and moisture are displaced. Dries in a short time, is water vapor permeable and water repellent. Suitable as a saturating primer for further coatings such as BENAR oils and other single-component coatings. For the sole treatment (matt surface) for spars and masts, we recommend applying "wet on wet" until the wood is completely saturated. Suitable for all types of wood.

Application: The product is ready to use and should not be diluted. Stir well before use. The product can be applied with a brush or roller. Clean tools with turpentine substitute.

Yield: approx. 3-6m2/l.

more information
Show 3 articles
📖 View article in the TOPLICHT catalogue


IMP Impregnating Oil is a transparent wood impregnation made from a drying alkyd resin oil. Due to its excellent penetration properties, it has a preventive effect against rot and fungal infestation when the wood is impregnated because air and moisture are displaced. Dries in a short time, is water vapor permeable and water repellent. Suitable as a saturating primer for further coatings such as BENAR oils and other single-component coatings. For the sole treatment (matt surface) for spars and masts, we recommend applying "wet on wet" until the wood is completely saturated. Suitable for all types of wood.

Application: The product is ready to use and should not be diluted. Stir well before use. The product can be applied with a brush or roller. Clean tools with turpentine substitute.

Yield: approx. 3-6m2/l.

Description

IMP Impregnating Oil is a transparent wood impregnation made from a drying alkyd resin oil. Due to its excellent penetration properties, it has a preventive effect against rot and fungal infestation when the wood is impregnated because air and moisture are displaced. Dries in a short time, is water vapor permeable and water repellent. Suitable as a saturating primer for further coatings such as BENAR oils and other single-component coatings. For the sole treatment (matt surface) for spars and masts, we recommend applying "wet on wet" until the wood is completely saturated. Suitable for all types of wood.

Application: The product is ready to use and should not be diluted. Stir well before use. The product can be applied with a brush or roller. Clean tools with turpentine substitute.

Yield: approx. 3-6m2/l.

Legal information about the product
CLP Regulation
Symbols ghs08
H phrases H304, EUH 066
P phrases P101, P102, P103, P280, P301+310, P331, P405, P501
Questions about the product?

Accessories

BENAR glossy wood oil
BENAR glossy wood oil
According to german legislation this product may only be sold to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.Current delivery notification: The container size 3l (2091-003) is currently not available. Please switch to the small containers. BENAR-Oil is a special product for the conservation of woods, for the interior and outside. Originally developed for tropical hard woods, BENAR-Oil stood the test of time for the treatment of all woods on board. BENAR-ÖL means moisture release, long oil and high gloss wood treatment. It provides a varnish finish effect with very high penetration and breathing properties, allowing humidity to be released without peeling off and to move together with breathable wood without cracking. Substrate to be dry and free of contamination. To be applied over newly sanded surface or on old surfaces previously coated with BENAR MARINE in good condition.BENAR-Oil GLOSSY is a slow-hardening wood-protectant (without fungicide) with breathable finish, similar to varnish.It provides for an exceptionally long lasting interval before reconditioning. Sanding before repeating coats is not necessary. For a new conserving protection, 4 coats are recommended.Yield: 14-16 m.sq./l.If a matt finish is desired when preserving wood with BENAR-OIL, apply BENAR-OIL MATTE as the final coat.For soft and light-sensitive timbers and horizontal surfaces outdoors, that are directly exposed to the sun, we recommend BENAR-ÖL UVR or BENAR-ÖL MARINE.Wood susceptible to fungi should be pretreated with our fungicidal impregnating oil IMP.

From €35.90 *
Details
BENAR glossy wood oil UVR
BENAR glossy wood oil UVR
According to german legislation this product may only be sent to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.BENAR-Oil UVR is a slow-hardening wood protectant (without fungicide) with a breathable surface similar to varnish, but with a reddish UV-filter, which filters up to 90% of the damaging UV-light and protects from weathering and greying of the wood. The wood darkens with each application. Absolutely recommended for light-sensitive woods.If a matt finish is desired when preserving wood with BENAR-OIL, apply BENAR-OIL MATTE as the final coat.BENAR-Oil is a successful specialist product for the conservation of woods, for the interior and outside. Originally developed for tropical hard woods, BENAR-Oil stood the test of time for the treatment of all woods on board. BENAR-ÖL means moisture release, long oil and high gloss wood treatment. It provides a tranparent varnish finish effect with very high elasticity and good penetration and breathing properties, allowing humidity to be released without forming black rottenness spots or peeling off and to blend together with breathable wood without cracking.Yield: 14-16 m.sq./l.

From €39.90 *
Details
BENAR matte wood oil
BENAR matte wood oil
According to german legislation this product may only be sent to resellers, professional users and public research institutes.If this applies to you, please request a quotation here.You may also buy this product personally in our showroom in Hamburg.Matte oil of the BENAR brand.If you wish a satin surface on BENAR treated wood, you should apply BENAR matte oil as final finish.10-12 sqm/litre.

€39.90 *
Details

Last seen products

More articles from this category

EPIFANES EASY-FLOW Paint Conditioner
EPIFANES EASY-FLOW Paint Conditioner
EPIFANES EASY FLOW penetrating oil is a multi-purpose additive made of natural oils to improve the impregnating ability of one-component primers or undercoats.This product can be added to all conventional and semi-synthetic paints, even under difficult conditions, a favorable result is achieved. By adding 5-10% to the paint, visible brush strokes are avoided, thus creating a closed and smooth surface. Can also be used as an impregnating oil for wood and as a preservative oil for rusted steel surfaces freed from loose rust.This product can be reworked with conventional paints.

From €17.90 *
Details
IMP fungicidal impregnating oil
IMP fungicidal impregnating oil
IMP Impregnating Oil is a transparent wood impregnation made from a drying alkyd resin oil. Due to its excellent penetration properties, it has a preventive effect against rot and fungal infestation when the wood is impregnated because air and moisture are displaced. Dries in a short time, is water vapor permeable and water repellent. Suitable as a saturating primer for further coatings such as BENAR oils and other single-component coatings. For the sole treatment (matt surface) for spars and masts, we recommend applying "wet on wet" until the wood is completely saturated. Suitable for all types of wood.Application: The product is ready to use and should not be diluted. Stir well before use. The product can be applied with a brush or roller. Clean tools with turpentine substitute.Yield: approx. 3-6m2/l.

From €37.90 *
Details
OWATROL MARINE D1 penetrating oil
OWATROL MARINE D1 penetrating oil
OWATROL DEKS OLJE D1 is a low-viscosity, transparent oil that is ideal for saturating wood, especially hardwoods and tropical woods. Due to its enormous penetrating capacity, it penetrates deep into the wood and displaces any moisture and air present. On the one hand, complete saturation prevents solid wood from working so that it no longer swells. On the other hand, the oil provides preventative protection against fungal and mold infestation. In the case of porous wood, treatment with D1 facilitates subsequent painting, as saturated wood absorbs less varnish or paint.OWATROL D1 can be applied to new, untreated wood or to wood that has already been weathered (with appropriate preparation). As a sole preservative, a permanently elastic, breathable, silky matt surface is achieved (e.g. for non-slip decks). OWATROL DEKS OLJE D2 is recommended as a film-forming further treatment. OWATROL D1 can also be painted over with 1-component primers and alkyd paints.Application: The product is applied in several coats until the wood is saturated. Then wait 15-20 minutes to allow the oil to soak in. Do not allow the oil to dry between coats, but work wet on wet. After the last coat, the surface should be wiped with a clean cloth after the waiting time to avoid the formation of a film.Important: To saturate wood in underwater areas, ensure that the wood is coated with a waterproof blocking primer (silver primer, CR primer). A recoating interval of at least one week (at 20°C) should be maintained between OWATROL D1 and primer, and correspondingly longer at cooler temperatures. It is also important to ensure that after the last coat of OWATROL&nbspTechnical DataSubstrate: All wood types, including dense and oily hardwoods (e.g. teak, mahogany),Application area: interior and exteriorSurface preparation:Remove old coatings completelySand wood dry with 120 grit and clean (e.g. with denatured alcohol)For decks: sand with 40 grit, brush in grain direction using brass brush for slip resistanceTopcoat: Above water: OWATROL DEKS OLJE D2, 1component-PUR varnishes, alkyd-based coatings (test first); Below water: chlorinated rubber primer + antifoulingCoverage: 1–4 m²/l (initial saturation), 8–12 m²/l (maintenance)Thinner: None Application method: Flat brush, mohair roller, spray deviceDrying times at 20 °C: Fully cured after 3 daysFurther information on applying this product can be found in the technical data sheet under "Downloads".

From €29.90 *
Details
OWATROL DEKS OLJE D2
OWATROL DEKS OLJE D2
OWATROL DEKS OLJE D2 is a film-forming, high-gloss oil varnish that is applied as a top coat to wood surfaces treated with OWATROL DEKS OLJE D1.The coating forms a resistant, elastic varnish film that does not crack or flake off. Highly effective UV protection pigments ensure long-lasting protection. Particularly suitable for use on tropical hardwoods that are difficult to paint. Only use above water on all wooden surfaces that are not constantly exposed to water.Application: Apply 3 - 6 coats at intervals of at least 12 hours at 20° C. Do not sand between coats. Allow to dry for at least 3 - 4 days before using the object again. Wipe up drips and runs immediately after application, as dried D2 oil is very difficult to remove completely.Technical DataApplication area: Wooden surfaces above waterline, interior/exteriorSubstrate: soft and hard woods Pre-treatment: Prime with OWATROL DEKS OLJE D.1; sand and degrease surfaceApplication: brush, rollerCoverage: approx. 12 m²/lThinner: noneDrying (20 °C): 12–24 hrs per coatIngredients: alkyd-urethane resinsApplication temperature: 8°C to 35°CFurther information can be found in the technical data sheet under “Downloads”. 

From €33.90 *
Details
2504*01 OWATROL Öl / MARINE OIL Spraydose
OWATROL oil aerosol can
OWATROL OIL, which is based on natural oils and has exceptionally good penetration properties, is the basic product for many applications.It is three times wetter than water, i.e. it even creeps upwards. On rusty metal, it creeps deep into the rust pores and displaces the air and moisture (i.e. the actual cause of corrosion) even from inaccessible areas. After drying, the leaf rust can be removed more easily and the soaked residual rust is consolidated, preserved and sealed for the long term and can be painted with all turpentine-substitute thinnable paints.For use on larger surfaces or as a paint additive, OWATROL is suitable for painting from the can.Technical dataSubstrates: Rusty and bare metals (iron, steel, aluminum), new and weathered woodPre-treatment: depending on the material: remove loose rust, non-adherent old paint, oil and grease

€19.90 *
Details
OWATROL oil paint conditioner
OWATROL oil paint conditioner
OWATROL OIL, which is based on natural oils and has exceptionally good penetration properties, is the basic product for many applications.It is three times wetter than water, i.e. it even creeps upwards. On rusty metal, it creeps deep into the rust pores and displaces the air and moisture (i.e. the actual cause of corrosion) even from inaccessible areas. After drying (24 hours at 20°C), the leaf rust can be removed more easily and the soaked residual rust is consolidated, preserved, sealed and can be painted with all turpentine substitute thinnable paints.OWATROL-OIL is also ideal as an additive (color additive) for 1-component paints. Instead of using turpentine substitute as a thinner, it significantly improves the coating and flow properties and ensures optimized adhesion without compromising the quality of the paint. On the contrary, the addition of 10-15% OWATROL OIL makes paints and varnishes even more porous and durable on the surface.OWATROL spray is suitable for minor touch-ups.Technical dataSubstrates: Rusty and bare metals (iron, steel, aluminum), new and weathered woodPre-treatment: depending on the material: remove loose rust, non-adherent old paint, oil and grease

From €13.90 *
Details
OMNISIDE INNOPERL W Impregnation
OMNISIDE INNOPERL W Impregnation
Surface impregnation for many absorbent surfaces such as sails, tarpaulins or boat cushions, as well as transparent protection for natural stone and wood surfaces. The product is not applied, but is absorbed into the surface, is invisible and does not change the color of the treated surfaces.  Has strong water, oil and dirt repellent properties (hydrophobic and oleophobic).Solvent and silicone-free, making it safe to use indoors.Can be applied with a brush, fur roller, cloth or pressure pump sprayer (see technical data sheet under "Downloads & Information").Coverage: approx. 10 m²/l Dilution: Can be diluted up to 1:2 with water.

From €31.00 *
Details
Wood impregnation OWATROL AQUADECKS
Wood impregnation OWATROL AQUADECKS
Newly developed product: deeply immersive, water based wood impregnation for all woods in the interior and the outside, especially qualified for teak decks.The quick drying impregnation protects the wood long term from greying (2 years) and is applied directly to the new wood or already weathered, but cleaned wood, without developing a film on the surface.The teak coloured pigmentation enables the UV protection.

€149.00 *
Details
BIO PIN Holzwurmfrei
BIO PIN Holzwurmfrei
Preventive, open-pored wood preservative against fungal decay and insect attacks of timber in the interior and outdoors as well as wood in humidors.Also suited for the restoration (solidification) of old timberPermeable for water vapour .Effective by obfuscation of the wood for vermin. Rubber gloves should be carried when applying.A recognised respiratory equipment should be carried when using a spray diffuser.Do not sand with steel wool, since the sanding dust can lead to black staining. The biopin Vertriebs GmbH produces innovative natural paints already in the fourth generation with the technical facilities of the present. The company manufactures wholesome products on the basis of natural raw materials.

€23.00 *
Details
LE TONKINOIS BIO IMPRESSION Pre-Coat Oil
LE TONKINOIS BIO IMPRESSION Pre-Coat Oil
LE TONKINOIS BIO IMPRESSION is a highly effective pre-coating oil that protects, beautifies and hardens wood. It is ideal for pre-treatment before varnishing, as it penetrates deep into the wood and, due to its saturation, unifies the absorption behavior of the wood surface. Made from pure natural oils (linseed oil, castor oil, palm oil) and free from harmful substances and solvents. The oil dries quickly, is abrasion-resistant after drying and provides a good base for further surface coating with varnishes such as LE TONKINOIS Vernis or Marine No.1.Technical DataApplication area: Interior/exterior wood: windows, doors, fences, cladding, floorsSubstrate: sanded, clean, dry, max. 15% moistureApplication: brush, flat brushCoverage: avg. 20 m²/l; 30–50 ml/m² eepending on materialThinner: noneDrying (20 °C): dust dry 6–8 hrs, recoatable after 12 hrsIngredients: linseed oil, tung oil, natural resins, isoaliphaticsFurther information can be found in the technical data sheet under "Downloads".

From €19.90 *
Details
RYLARD IMPREGNATE Wood Impregnation Oil
RYLARD IMPREGNATE Wood Impregnation Oil
Deep penetrating priming oil for untreated wood. Forms a long-lasting barrier in the wood and also serves as an ideal base for varnishing with RYLARD clear coats. Suitable for all types of wood. Yield 15-20 m²/l.RYLARD varnischThe Italian ship and yacht paint manufacturer BRAVA from Genoa, offers a range of traditional yacht paints with its RYLAR brand, the original formula of which was developed for yachting in the 19th century and is known as "Yachtman's Mirror" on many classic yachts.

€21.60 *
Details
HEMPEL WOOD IMPREG Impregnating Oil
HEMPEL WOOD IMPREG Impregnating Oil
Clear alkyd oil for impregnating raw wood to saturate it before applying varnish. Also suitable for the treatment of hardwoods, both indoors and outdoors above the waterline.Application: Before applying to untreated wood, ensure that the surface is dry and clean (wood moisture content should be below 16%). Remove dust and loose material from surfaces that have already been treated. Stir the container well and apply 2-4 coats wet on wet with a brush until the wood is saturated and no more oil is absorbed. Allow the oil to soak in, then wipe off excess oil with a lint-free cloth to prevent a film from forming. After drying, the surface can be further treated with the appropriate varnish or paint.Theoretical coverage: 13 m²/l (depending on surface roughness, porosity of the substrate and application method)Thinner: HEMPEL Thinner 811 (max. 20%)

€22.90 *
Details