- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Thinner & additives
Aromatic-free brush thinner with high dilution power for most single-component primers, paints, and varnishes; very pure due to double distillation.Application: only stir the paint thinner into the varnish or paint in small amounts if necessary and mix thoroughly. Do not dilute more than necessary; excessive addition can cause runs and reduce the dry film thickness. Use only the thinners recommended by the manufacturer. Read the label/product information or safety data sheet before use.Technical DataApplication area: Dilution of 1K primers, paints, and varnishes; designed for brush/roller applicationApplication method: Add to the respective 1K coating, designed for brush/roller processing
Special thinner based on aromatic hydrocarbons for the application of polyurethane coatings, single-component paints, and epoxy resin systems. THINNER 21-06 is also suitable for cleaning tools and equipment before and after application.Information about 2580-102: The 20-liter container is available at a special price due to its short best-by date (08/2026).Application: Use only in conjunction with the designated PPG coatings. Add thinner according to manufacturer instructions to achieve the desired viscosity. Observe safety and application instructions on the container and safety data sheet, and wear personal protective equipment.Technical DataApplication area: Thinning of PPG polyurethane, epoxy, and 1-component coatings; cleaning of toolsCompatible products: SIGMA VIKOTE 18 (Art. 2580-125), SIGMA ECOFLEET 290S (Art. No. 2584-003)Shelf life: At least 60 months when stored in a cool, dry placeFor more information on application, refer to the technical data sheet under 'Downloads'.
Balsamic turpentine oil is a high-quality, pure natural product with high dissolving power, which is obtained from the distillation of turpentine (a mixture of resin and essential oils) from coniferous woods such as pine. It is transparent, has a mild odor and is suitable as a thinner for oil-based paints or natural oils such as linseed oil, linseed oil varnish or wood oil stand oil. It can also be used to clean stains or dissolve natural resins and oils.Application: The balsamic turpentine oil can be added according to the paint manufacturer's instructions. It should be stored in a cool, but frost-free place. Always close the container tightly.Safety instructions: The product is highly flammable and harmful if swallowed, in contact with skin or inhaled. Ensure good ventilation during processing, avoid aerosol formation and keep ignition sources away.Technical dataArea of application: Thinner for oil and oil-alkyd resin paintsSubstrate: depending on the paint system usedCoverage: depending on the type of paint and desired viscosityDrying times: depending on the paint usedFurther information on processing can be found in the technical data sheet under 'Downloads'.
Special cleaner for degreasing polyester and gelcoat surfaces before sanding and painting. EPIFANES Polyester Degreaser removes oil, grease, wax, silicone, and other contaminants that can affect the adhesion of subsequent coatings.Application: Thoroughly wipe the surface with Epifanes Polyester Degreaser. Use a clean, lint-free cloth and change it regularly during use. Apply only to dry surfaces. Observe safety and handling instructions on the container and safety data sheet.Technical DataApplication area: Cleaning and degreasing of polyester and gelcoat surfaces before further treatmentApplication method: Apply with a lint-free cloth and wipe thoroughly
Special thinner for Epifanes 2-component polyurethane paints. Developed for use at higher ambient temperatures to delay drying speed and ensure even flow of the coating.Application: Use only for Epifanes 2-C-PU products. Add to the paint in small amounts to achieve the desired viscosity. Especially suitable for high temperatures or large-area coatings. Observe safety and handling instructions on the container and safety data sheet.Technical DataApplication area: Thinning Epifanes 2-C polyurethane paints at high temperaturesApplication method: Add to the paint mixture in the dosage recommended by the manufacturer
HEMPEL Thinner No. 808 is suitable for thinning single-component HEMPEL antifoulings and for cleaning tools such as brushes or rollers.
A fast evaporating thinner for spray applications of EPIFANES POLY-URETHANE Yacht paints and varnishes.
LE TONKINOIS Thinner is a universally applicable thinner for all solvent-based LE TONKINOIS products, linseed oil varnish (Art.No. 2691-001), as well as for cleaning brushes and tools, degreasing surfaces, and removing resin or wax contaminants. Application: Always ensure good ventilation during use. LE TONKINOIS Thinner can be used both for targeted thinning during application and for cleaning purposes. Ingredients: IsoaliphaticsFurther information on application can be found in the technical data sheet under 'Downloads'.
Content: 1.2048 Liter (€0.00 / 1 Liter)
HEMPEL'S Thinner No. 811 is suitable for thinning and cleaning tools for one-component primers, top coats and lacquers from HEMPEL.
LE TONKINOIS GELOMAT is a matting agent for combination with all LE TONKINOIS lacquers. It is added to the last coat of lacquer to achieve a satin to matt surface. Depending on the mixing ratio, different gloss levels such as matt, silk matt or silk gloss can be achieved.Application For a matt surface, mix LE TONKINOIS GELOMAT and lacquer in a ratio of 1:1. For silk matt results, use a ratio of 1:2, for silk glossy surfaces, use a ratio of 1:3. Ensure good ventilation during application. The drying time corresponds to that of the paint product used.Further information can be found in the technical data sheet under 'Downloads'.
Thinner for all Epifanes epoxybased products, like EPIFANES EPOXY PRIMER or EPIFANES INTERIMCOAT. Also suited for soften existing epoxy to allow better bonding for fresh layers.
Type A thinner can be used for many SEAJET products, such as antifoulings and the primer SEAJET Type 015. 5% thinner is usually sufficient as an additive for paint. Can also be used for cleaning painting tools. 
INTERNATIONAL THINNER No.1. is a universal thinner for one-component products (except Primocon and antifoulings) and for varnishes.Technical dataArea of application: Thinning of INTERNATIONAL 1K productsCompatible with: INTERNATIONAL ORIGINAL Art.No. 2550-001), COMPASS (Art.No. 2550-076), SCHOONER (Art.No. 2550-073)
Colorless, aromatic-free special thinner for spray application of Epifanes 1-component varnishes, primers, and paints. Developed to achieve the correct spray viscosity.Application: Use only for spray application of Epifanes 1-C products. Add thinner in small amounts until the recommended spray viscosity is achieved. Do not overdose, as this can negatively affect drying and film thickness. Observe the safety and processing instructions on the product packaging.Technical DataApplication area: Thinner for spray application of Epifanes 1-C varnishes, primers, and paintsApplication method: Add to Epifanes 1-C products to adjust spray viscosity
Special thinner for Epifanes Poly-Propoxides (PP) 2-component products. Developed to adjust processing viscosity and to clean the tools used after working with these systems.Application: Use only for thinning Epifanes PP-2C products in the quantities specified by the manufacturer. Do not overdose, as this may negatively affect drying and layer formation. Also suitable for cleaning brushes, rollers, and spray equipment after processing PP systems. Observe safety and handling instructions on the container and safety data sheet.Technical DataApplication area: Thinning and cleaning with Epifanes Poly-Propoxides (PP) 2-component productsApplication method: Add to paint or primer mixture according to manufacturer's instructions; clean tools by rinsing
Universal special thinner for various Epifanes products such as EPIFANES CR Antifouling Primer or antifoulings such as EPIFANES FOUL-AWAY. It is used to adjust the application viscosity and is also suitable for cleaning tools after application.Application: Add to the respective Epifanes product in small quantities until the desired viscosity is achieved. Do not dilute more than necessary to avoid impairing drying and layer build-up. Also suitable for cleaning brushes, rollers and spraying equipment after use. Observe the safety instructions on the container and safety data sheet.
Solvent-based cleaner for cleaning tools and equipment after using Epifanes 1-component varnishes, primers, and paints. Reliably removes fresh varnish and paint residues.Application: Rinse brushes, rollers, or spray equipment with Epifanes cleaning thinner immediately after use. Use only outdoors or in well-ventilated areas. Do not use for thinning varnishes. Observe safety instructions on the container and in the safety data sheet.Important: Not suitable for GRP surfaces; for this purpose, EPIFANES Polyester Degreaser (Art.No. 2059-401) is recommended.Technical DataArea of application: Cleaning of work equipment after processing Epifanes 1-C productsApplication method: Dip or rinse tools in thinner
White Spirit is a turpentine substitute and a mineral oil-based thinner. The product is used to thin paints based on oil and oil-alkyd resin, as well as a cleaning agent for parquet, linoleum, and brushes. It is characterized by consistent quality and good material compatibility.Application: The product is added to the respective paint and mixed. The maximum amount depends on the manufacturer's specifications of the respective paint. In addition, white spirit can be used to clean used painting tools such as brushes. Always close tightly after use and store in a cool, but frost-free place.Technical DataField of application: Thinner for paints based on oil and oil-alkyd resin; cleaning agent Substrate: Painted surfaces, used toolsCoverage: depends on the paint system and desired viscosityDrying times: depends on the paint system usedFurther information on processing can be found in the technical data sheet under 'Downloads'.
Penetrating oil based on natural oils, which is used as an additive to improve the flow properties of conventional and semi-synthetic paints. It reduces visible brush strokes, impregnates wood and has a rust-inhibiting effect on steel by penetrating deep into the substrate. This means that a favorable result can be achieved even under difficult conditions.
The thinner HEMPEL Thinner No. 845 is suitable for thinning and cleaning the HEMPEL Light Primer (Art. No. 2577-055).
Spezialverdünner für YACHTCARE Antifoulings. Entwickelt zur Einstellung der Verarbeitungsviskosität und zur Reinigung von Werkzeugen nach der Verarbeitung.Anwendung: Nur für YACHTCARE Antifouling-Produkte verwenden. Dem Anstrichmaterial in kleinen Mengen zugeben, bis die gewünschte Viskosität erreicht ist. Nicht überdosieren, da dies die Schichtdicke und Trocknung beeinflussen kann. Auch geeignet zum Reinigen von Pinseln, Rollen und Spritzgeräten. Sicherheits- und Verarbeitungshinweise auf Gebinde und Sicherheitsdatenblatt beachten.Technische DatenAnwendungsbereich: Verdünnen und Reinigen bei YACHTCARE AntifoulingsKompatible Produkte: YACHTCARE ANTIFOULING SP (Art.Nr. 2520-701), YACHTCARE ANTIFOULING ACTION (Art.Nr. 2520-801)
Color additive for the underwater coating LeFANT T-COAT. Mix the color additive with the primer, then add the hardener and stir thoroughly. One paint pot is sufficient for a 750 ml can.
Pure stand oil. When adding 2 % maximum it can prolong the initial drying period and the process time of all half syntectic single component boat varnishes and coloured lacquer.
