Boat care & protection

WASH & WAX is a mild wax concentrate that cleans treated surfaces in one pass and conserves them at the same time.Intended for quick and effortless care of all exterior surfaces.The concentrate removes even tenacious dirt. Cleans and waxes the surface at the same time, which significantly lengthens the protection of waxed and polished surfaces.YC WASH & WAX contains no solvents, is silicone-free and biodegradable.For cleaning and protecting gelcoat, plastic, metal and painted surfaces.

EPIFANES Seapower Inflatable Cleaner is a special liquid product for cleaning and maintaining all types of inflatable boats and can be used on materials such as butyl, hypalon, rubber and vinyl. Stubborn dirt and stains such as tar, diesel oil and marks from shoe soles can be easily removed with the cleaner. At the same time, the product has a caring and protective effect and maintains the flexibility of the material. For surfaces made of rubber and vinyl, Boat Cleaner also prevents them from becoming brittle or sticky due to sunlight exposure. This makes the Boat Cleaner also ideal for use on fenders.Contents: 500 ml bottle.EPIFANES-Seapower cleaners are proven products that have been used for years to clean and maintain boats. EPIFANES has an optimal working product for each surface, regular cleaning and waxing treatment not only makes clean, but also permanently protects against dirt and weathering.

Cleaning concentrate for all soiled surfaces on a boat. Dissolves oil and grease, is pH-neutral and bio degradable. 1l-bottle.

EPIFANES Seapower Boat Soap is a cleaning concentrate for all surfaces on the boat. The shampoo does not attack the wax layer, is ph-neutral, biodegradable and economical in use. It can also be used for cleaning 1- and 2-component paint systems, metal rubber and wood. Application: Fill bucket with lukewarm water, then add the soap. For persistant dirt, simply add a little more cleaner and wring out the sponge or cloth outside the bucket (e.g. in a separate container) to avoid contaminating the wash water. EPIFANES-Seapower cleaning agents are long established products, deployed to clean and maintain boats for many years. EPIFANES has the most effective product for every surface - cleaning and wax treatment on a regular basis does not only keep the boat tidy but also protects it permanently against dirt and dilapidation.

A thick-flowing, aqueous gel for the care and cleaning of weathered and yellowed gelcoat, plastic and painted surfaces.ANTIGILB effortlessly removes the typical "yellow waves" on the bow and transom waterline areas. The original color is brought back through the use of this product.For removing and cleaning the yellowing and bleaching that are characteristic on the bow, waterline and transom of boats.Finishing with a sustainable and lasting surface sealant, for example, YC BOAT WAX, is recommended.

Special cleaner for degreasing polyester and gelcoat surfaces before sanding and painting. EPIFANES Polyester Degreaser removes oil, grease, wax, silicone, and other contaminants that can affect the adhesion of subsequent coatings.Application: Thoroughly wipe the surface with Epifanes Polyester Degreaser. Use a clean, lint-free cloth and change it regularly during use. Apply only to dry surfaces. Observe safety and handling instructions on the container and safety data sheet.Technical DataApplication area: Cleaning and degreasing of polyester and gelcoat surfaces before further treatmentApplication method: Apply with a lint-free cloth and wipe thoroughly

Versatile water-based industrial cleaner for stubborn soiling on almost all surfaces. Whether oil films, grease deposits, soot or adhesive residues - OWATROL PURATROL removes even heavy residues thoroughly and gently. The alkaline cleaner is suitable for indoor and outdoor use, on horizontal and vertical surfaces, e.g. plastic windows, awnings, garden furniture, machines or workshop floors. PURATROL is also ideal for degreasing before painting. The cleaner is available as a concentrate and can be diluted with water as required. Subsequent neutralization is recommended for wooden surfaces to prevent any darkening.Application: Do not apply to hot surfaces. Ensure good ventilation. Dilute the concentrate in a ratio of 1:5 to 1:20. Apply the product and leave to work for ten minutes. Remove soiling with a brush or cloth, wash off cleaning agent residues with clear water. Repeat the application for heavy soiling &nbsp

BOAT CLEANER is a liquid, wear-resistant scrubbing and polishing medium. It thoroughly and optimally cleans gelcoat, aluminum, metals and various plastics. Also easily applicable for hard-to-clean dirt, like grease, oil, rust, etc.Works with polishing machines.For cleaning heavily weathered and chalked GRP or polyurethaned surfaces.With the suggested finish application of YC BOAT POLISH, you will get an additional surface gloss to withstand even the highest demand.Sealing it with YC BOAT WAX or YC LIQUID HARD WAX is recommended, in order to protect the surface over a long time.Coverage: approx. 20 m.sq./l.

High-performance and concentrated solution for die optimal deep cleaning of gel coat and Laquer surfaces.Reliably removes tenacious staining like wax, oil, grease, tar stains and rainwater streaks.

Boat cleaner: Liquid, silicone- and wax-free cleaner for heavily soiled or weathered plastic surfaces.

SEAPOWER Hull  Cleaner is a special formulation for cleaning your hull without damaging the gelcoat or antifouling. Removes algae, slime, oil and other soiling. Also suitable for removing bird and spider droppings. Easy to use: spray on, allow to react and rinse thoroughly with water. It's recommended to protect cleaned gelcoat surfaces with a wax like the SEAPOWER Super Poly Boat Wax.Packaging: 1l Spray bottle

OWATROL GELCOAT RESTORER, also known as POLYTROL, is a tried and tested color refresher for metals, plastics, paints and gelcoats.The product refreshes faded colors of plastic or gelcoat surfaces, regenerates faded surfaces of marble, tiles or slate and restores shine to dull surfaces without leaving a greasy or oily film.The product is acid- and silicone-free, extremely penetrating and penetrates deep and sealing into microporous surfaces.Also suitable for the care of brass, bronze and stainless steel fittings.Application: Apply and spread evenly with a brush or clean cloth, spray from a distance of approx. 30 cm. After a maximum of 10 minutes, rub the surface dry with a absorbent, lint-free cloth, removing any excess product.Technical DataApplication area: Restores color and gloss on weathered plastic, gelcoat, paint, metal, plastic partsSubstrate: dry, clean, grease-freeApplication: cloth or lint-free rag; remove excess within 20 minCoverage: approx. 18 m²/l (depending on porosity and surface)Thinner: noneApplication temperature: +5 °C to +35 °CDrying (20 °C): fully dry after 24 hrs; no buffing requiredFurther information on application can be found in the Technical Data Sheet under "Downloads".

BOAT POLISH is a liquid, universal abrasive for lightly oxidized polyester or polyurethane surfaces (silicone-free).BOAT POLISH cleans gelcoat and painted surfaces to the pores and achieves a new surface gloss.The polish can be applied by hand or with a polishing machine.For cleaning slightly dirty and weathered surfaces, as well as for polished and synthetic surfaces. In order to seal substantial surfaces, polish with a coat of YC BOAT. Coverage: approx. 33 sq.m./l.

LAMBSWOOL POLISHER with Velcro back for optimal polishing of plastic and painted surfaces. Dimensions: D x H: 133 x 22 mm.

POLISHER of resistant foam with velcro back. For the optimal application of abrasive pastes and polishes. Dimensions: D x H: 150 x 50 mm.

Fine polish for polishing less heavily chalked and faded or beforehand with coarse refinish treated gel coat surfaces to high gloss.Applicable also for hard lacquer surfaces. Processing by hand or machine.Finally the surface should be sealed with YACHTCARE BOAT WAX or REFINISH PREMIUM GLOSS.

EPIFANES SEAPOWER Color Restorer is a liquid color refresher for restoring gloss and color on weathered gelcoat and paint surfaces. Especially when the gelcoat is dull and matte, it should be well polished again. The Color Restorer removes heavy weathering and gray haze without attacking the gelcoat. The product brings back the original color, even dark colored surfaces look "like new" again. Application tip: Apply with a cleaning cloth in circular, overlapping motions. Change the cloth frequently for a clean result. To seal the cleaned surface, it is recommended to apply a protective wax afterwards, like EPIFANES SEAPOWER Super Poly Boat Wax.EPIFANES-Seapower cleaning agents are established products, deployed to clean and maintain boats for many years. EPIFANES has the most effective product for every surface - cleaning and wax treatment on a regular basis does not only keep the boat tidy but also protects it permanently against dirt and dilapidation.

Special acrylic glass polish for the removal of stains an scratches from acrylic surfaces.

POLY GLANZ is a silicone-free polishing cream consisting of pure wax, which removes matte and weathered areas from plastic surfaces. Paints are refreshed and treated surfaces are protected against dirt, loss of gloss and bleaching with this long-lasting wax film.Intended for GRP and plastic surfaces and chromed surfaces.Coverage: approx. 50 g/m.sq.

Silicon and abrasive free polishing paste with PTFE non-stick technology for long lasting shine and guard against new staining.This product is applied following the refinishing of the surfaces with YACHTCARE REFINISH 1 and is much easier and faster to use than sealing pastes.

Abrasive sanding and polishing paste with a coarse granulation for work on heavily chalked and faded gel coat surfaces.Can be processed by hand or machine.

Protective final polish coating in a practical spray bottle. Designed for the long-term maintenance of high-gloss gelcoat and painted surfaces. Easy and economical to use, the product is sprayed on and simply polished off after a short reaction time. Protects the surface against UV radiation and aggressive weather influences. Suitable for all smooth surfaces such as gelcoat, metal and paint.Contents: 500 mlColor: milky light brown (becomes transparent after application)Coverage: approx. 10 ml/m²

Abrasive, universally employable sanding and polishing paste, where the granulation of the rubbing compound is refined autonomously during the polishing process.Thereby a heavily weathered, matt or faded surface can be refurbished from rough cleaning to high gloss in one work step.The polishing paste is free of silicone and is suited for manual and mechanical usage on lacquer, metallic and gel coat surfaces.

Boat polish: Wax-based liquid polish for cleaning weathered surfaces. The product leaves behind a high-gloss finish.

BOAT WAX is a very productive hard wax of highest quality that can be easily applied and polished. It's a matter of a solid, watertight emulsion of wax and silicone, based in Brazilian carnauba wax.The polish yields and extraordinarily long-lasting and hard, mirror-like finish, as a long-term protectant against oxidation and saltwater damage.The built-in UV filter minimizes yellowing.As a surface protectant (wax sealant) for gelcoat and deck surfaces above the waterline on plastic boats, patio furniture and other plastic surfaces.Coverage: approx. 20 sq.m./bottle (200 g).

EPIFANES Seapower Boat Wax is a liquid sealing hard wax without abrasives based on high quality natural carnauba waxes. It serves as a long-term preservative, fills the pores and gives an excellent, long-lasting shine. Suitable for fibreglass, metals, and all painted and varnished surfaces.Application tip: Apply product first to a cleaning cloth, not to the surface. Allow to dry thoroughly before buffing. For optimum shine, rub in overlapping, circular motions. Change the cloth regularly. Also suitable to protect clear varnished surfaces.Content: 500ml bottleEPIFANES-Seapower cleaning agents are long established products, deployed to clean and maintain boats for many years. EPIFANES has the most effective product for every surface - cleaning and wax treatment on a regular basis does not only keep the boat tidy but also protects it permanently against dirt and dilapidation.

YACHTCARE fluid hard wax is a fluid sealing emulsion of clean, high-quality carnuba wax. It serves as a long-time conservation of paint, metal, hard plastic, gelcoat, etc. and gives an excellent gloss.

AUTOSOL Boat Wax: Liquid sealant/hard wax without abrasive. This wax serves primarily as a long-lasting preservative and gives and excellent shine. Intended for plastic, as well as for brass and bronze.

Daveyshine marine metal polish is a perfect solution for metal care on board and at home.Highly recommended from the manufacturers of fine bronze hardware Davey and Co. Key Features:- Cleans and polishes in one product Non-toxic, non-abrasive and non-inflammable. - No acids or caustics and is therefore kind to the skin - Low risk of allergic reaction or sensitisation - Small amounts go a long way, therefore economic in use - Suitable for most standard marine metals including bronze, brass, stainless steel, aluminium & chrome - Leaves a protective coating to reduce re-tarnishing - Soft paste form - easy to apply.

Marine SHINE: Pure-wax polish, quickly and effortlessly removes dirt, rust and tarnished places in all bare metals and also on plastic.Corrosion protectants hinder new tarnishing.Comes in a 75 ml tube or 750 ml can.

WICHINOX PASSIVATION GEL from french manufacturer WICHARD is a cleaning and passivation agent for the maintenance of stainless steel parts in maritime and industrial environments. The gel formulation makes application easier even in hard-to-reach areas and ensures effective restoration of the protective passive layer on stainless steel.The product helps to remove tarnished surfaces and light corrosion marks on stainless steel fittings from Wichard, as well as other stainless steel components such as stanchions, handrails, or fenders. Application: Dismantle the parts to be treated if possible to avoid damaging adjacent surfaces. Ensure adequate ventilation and appropriate protective measures (e.g. gloves, safety goggles) during use. Stir before use. Apply the gel to the stainless steel surfaces to be treated with a brush and allow to act for 5–15 minutes. After the exposure time, rinse thoroughly. Do not apply to galvanized, painted, or anodized surfaces. Safety Note: Contains phosphoric acid. Harmful if swallowed. Causes severe skin burns and serious eye damage.Further information can be found in the Technical Data Sheet under 'Downloads'.

The polishing paste effortlessly removes all oxidation and corrosion and leaves a shiny surface. Can be used on magnesium, copper, bronze, brass, chrome and stainless steel. Can also be used to remove yellowing on Plexiglas or Lexan and to repair small cracks. Application: Apply the paste with a damp cloth, allow to dry and then polish by hand or machine. Not suitable for anodized aluminium. Contains ammonia, it is advisable to wear protective gloves and goggles when applying.

Using recycled raw materials, AUTOSOL has created a natural metal polish - without compromising on quality. The polish, like all AUTOSOL products, is microplastic free, it does not contain aggressive chemicals and is therefore better for you and our planet. The product is suitable for metals such as stainless steel, aluminum, chrome, brass, copper. It must not be used on coated, painted or anodized surfaces. Application: Apply thinly and polish with a soft cloth in circular movements until the desired result is achieved. Residues are polished out with a soft cloth.

Grease for sea cocks.

Calcium saponified grease according to DIN 51502, type KP2G-30 with EP (high pressure) additives and therefore suitable for use under high pressure and vibration.We recommend the grease as sterntube grease and water-resistant universal grease. The 400 ml cartridge size is also ideal for lubricating folding and rotary blade propellers using a grease gun via grease nipples.Specifications:extremely water-resistantvery good adhesion with a long-lasting lubricating film,long lubrication intervals due to very good ageing resistance,good fulling penetration (NLGI class 2)can be used at -30° to 120° C,The 400 g cartridge fits into standard grease guns.

Proven all-rounder for decades, suitable for a wide range of applications in the workshop, on the house or on the boat. CARAMBA Multi-Oil combines the effectiveness of a rust remover, lubricant, corrosion protection, contact spray and cleaner in one product.The oil can be applied in doses in the practical spray can. It is silicone-free, does not resinify and is also compatible for the application on most plastics and rubber materials.Contents: 300 ml spray

BALLISTOL UNIVERSAL OIL is a biodegradable, skin-friendly multifunctional oil for cleaning, maintenance, lubrication, and corrosion protection. The oil has been manufactured since 1904 using an unchanged formula and is based on a mildly alkaline composition with lanolin and is free of silicone, PTFE, and acid. It does not resinify and is emulsifiable in water.Usable in industry, shipping, agriculture, household, outdoor activities as well as for machines, tools, leather, wood, rubber, and even for use on humans and animals.Application: BALLISTOL Universal Oil can be used as a rust protection, lubricant, penetrating or contact oil. It dissolves tar, grease, adhesive residues, and other unsuitable oils, neutralizes weak acids (e.g. hand sweat), and is suitable for the care of leather, natural wood, and oil-resistant plastics. Application is done with a cloth or brush. Technical DataApplication area: Corrosion protection, lubrication, cleaning, maintenanceSubstrate: Steel, iron, leather (except suede), natural wood, rubber, plasticCoverage: depends on application method Thinning: not requiredApplication method: cloth, brushDrying times: not applicable; remains active and does not resinifyFor more information on application, please refer to the Technical Data Sheet under 'Downloads'.

FLUID FILM LIQUID A is a transparent, solvent-free, oil-based corrosion protection based on lanolin (wool grease) for soft coating of steel surfaces in above and underwater areas.The product displaces water, penetrates existing rust, and forms an elastic, adhesive protective film. It was originally intended for flooding repair-needed ballast water tanks on ships, floating docks, offshore units, for flooding coating of cavities, ballast water tanks, offshore structures, and hard-to-reach areas. The protective film lasts up to two years in enclosed cavities. Additionally, it is suitable for loosening seized rust or making rusted metal parts movable. Application on damp or slightly corroded surfaces is also possible.The product contains no solvents, is environmentally friendly, and easy to apply. Available as spray (type AS-R), in cans or containers (for dipping, spraying, or brushing).Application: Application is carried out depending on the area of use by flooding, brushing, rolling, or spraying. The material should be homogenized before use. After application, the gel time when flooding is about 3–4 hours. Application is possible at any temperature. Ensure adequate ventilation and personal protective equipment.Technical DataField of application: Single-layer corrosion protection on steel surfacesSubstrate: Steel (bare, rusty or damp); no special pretreatment necessaryPrimer: not requiredCoverage: approx. 12 m²/l at 80 µm wet film (roller, brush application)Thinning: not necessaryApplication method: Brush, roller, spraygun, flooding (professional users)Drying times: none; forms a non-drying, oily protective filmFor more information on application, refer to the technical data sheet under 'Downloads'.

Soft, adhesive special grease with good seawater and fulling resistance as well as excellent pressure absorption capacity. Not resinous.

The BALLISTOL PTFE Dry Lubrication Spray is suitable for clean dry lubrication of sensitive areas. It is free from oil, grease, and silicone. Finest PTFE particles adhere even to microscopically small surface irregularities, thereby reducing adhesion, sliding, and rolling friction, and protecting against dirt and dust deposits. The spray is highly compatible with materials and suitable for all common materials.The spray is suitable for consistent and long-lasting lubrication of rollers and bearings, sliding guides and rails, cable pulls and telescopic guides, gears and cogs, as well as plastics of all kinds.Application: Shake well before use. Spray the product onto the cleaned surface from a distance of 10–25 cm and allow it to dry for a few minutes. A barely visible, dry film remains.Hazard information: Extremely flammable aerosol. Container is under pressure: it may burst when heated above 50°C. Causes serious eye irritation. Further information can be found below under "Downloads & Information".Technical dataApplication area: Dry lubrication in guides, bearings, gears, cable pulls, plastic and metal jointsSurface: Metal, plastic, rubber – clean, grease-free, dryPrimer: not requiredYield: dependent on application area (spray application)Thinning: not requiredApplication method: Aerosol sprayDrying times: short, depending on ambient temperatureFurther processing information can be found in the technical data sheet under 'Downloads'.

The sea cock grease by SPARTAN is especially suited to lubricate sea cocks as well as other kinds of fittings.Comes in a 170g container.

Soft, adhesive special grease with good saltwater and walk resistance, as well as high pressure absorbtion properties.Won't harden.

Solvent-free, soft coating material based on lanolin (wool fat). FLUID FILM Gel BN is a physiologically safe and environmentally friendly corrosion protection agent. It serves as a single-layer long-term protective coating for ships, docks, offshore units, and similar objects when surface preparation is limited to high-pressure washing. The viscous gel can be used as a lubricant for machines, equipment, winches, and for wire rope preservation. The product offers excellent corrosion protection, lasting up to 20 years in enclosed spaces. It penetrates residual rust, and promotes the self-healing effect in case of damage to existing coatings. FLUID FILM Gel BN is temperature stable from -45 °C to +70 °C. Complies with MIL-Spec C-23050 guidelines. Preparation: Loose components, dirt, rust, and standing water must be removed before application. Surfaces must be dry.Application: FLUID FILM Gel BN can be applied using a brush, roller, spatula, or airless spray. The greater the layer thickness, the better the corrosion protection. Due to its gel-like consistency, thicker layers up to 1000 µm can be applied. The material can be used directly from the container. For areas with strong water turbulence, it is recommended to subsequently apply an additional layer of PERMA FILM (Art.No. 2718-501). Technical DataApplication area: Long-term protection for ballast tanks, voids, offshore structures, and metal partsSubstrate: Clean, dry, free from loose components; high-pressure cleaning recommendedLayer thickness: 600–1000 µm (airless spraying), 80 µm (brush/roller)Coverage: approx. 1.6 m²/l (at 600 µm), approx. 12 m²/l (at 80 µm)Application temperature: -10 °C to +40 °CApplication methods: Brush, roller, spatula, airless sprayingColor: Transparent (Gel BN)Temperature resistance: -45 °C to +70 °CFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

BALLISTOL UNIVERSAL OIL is a biodegradable, skin-friendly multifunctional oil for cleaning, care, lubrication and corrosion protection. The oil has been produced according to the same recipe since 1904 and is based on a slightly alkaline formula with lanolin and is free from silicone, PTFE and acids. It does not resinify and can be emulsified in water.Can be used in industry, shipping, agriculture, household, outdoor activities as well as for machines, tools, leather, wood, rubber and even for use on humans and animals.Application: BALLISTOL Universal Oil can be used as a rust protection, lubricating, penetrating or contact oil. It dissolves tar, grease, adhesive residues and other unsuitable oils, neutralizes weak acids (e.g. hand perspiration) and is suitable for the care of leather, natural wood and oil-resistant plastics. It is applied by spraying &nbsp

EPIFANES RAPIDCLEAR is a fast-drying, satin gloss clear varnish based on urethane/alkyd resin with integrated UV filter. The varnish forms a transparent, amber-colored protective film that preserves the natural appearance of the wood grain. RAPIDCLEAR is suitable for interior and exterior applications above the waterline – especially for oily woods such as teak – and can also be used as a quick base coat before high-gloss systems like EPIFANES Yacht Varnish (Art.No. 2050-001) or Hardwood Varnish Oil (Art.No. 2051-050).Application: The surface must be clean, dry, grease-free, and sanded (max. wood moisture: 15%). Application is done with a brush or spray gun at temperatures between 12 °C and 28 °C. No sanding is required between coats if recoated within 72 hours. For a high-gloss finish, EPIFANES YACHT VARNISH CLEAR can be applied to the sanded surface. Technical DataArea of application: UV-resistant clear varnish for wood above the waterline, interior and exteriorSubstrate: Clean, dry, sanded, max. 15% wood moisturePrimer: Not requiredCoverage: approx. 13 m²/l at 30 µm dry film thicknessThinner: Epifanes Paint Thinner (brush), Epifanes 1K Spray Thinner (spray gun)Application method: Brush or spray gun (not airless)Drying times (at 20 °C): Dust dry: 1 h, sandable: 2 h, recoatable: 5–8 hDurability: For long-lasting UV protection, at least 5–6 coats recommendedFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

Traditional oil varnish based on wood oil and alkyd resin for coating oily hardwoods such as teak and American softwoods. EPIFANES hardwood varnish oil serves as an alternative to pure oil systems and forms a grease and oil regulating clear varnish system in up to five coats.With a layer structure of less than five layers, the varnish oil still remains breathable. With more coats, the wood is completely sealed. Can be used for coating solid wood and plywood indoors and outdoors above the waterline, as well as for reworking existing one- and two-component lacquer systems.Application: Do not use the product below 8°C and avoid direct sunlight or strong wind. Apply the hardwood varnish oil with a brush. Do not apply wet on wet and avoid too thick layers to prevent drying problems, runs or craters. Intermediate sanding after the first coat after 24 hours by hand with a 280-320 grit paper, no intermediate sanding is necessary between subsequent coats as long as the drying times are observed. For oily woods, the manufacturer recommends a layer build-up of 5 coats, for other woods a layer build-up of 7 coats.&nbsp

Quick-drying, teak-tinted, semi-matt clear varnish with integrated UV filter for all types of wood above the waterline. The varnish combines easy application with good flow and even coloration - even on oily woods such as teak. EPIFANES RAPIDCOAT can be used both indoors and outdoors and is suitable as the sole protective coating or as a base for EPIFANES RAPIDCLEAR (Art.No. 2051-075), boat varnish (Art.No. 2050-001) or WOODFINISH GLOSS/MATTE (Art.No. 2051-001/2051-002).Application: The surface must be dry, clean and degreased. Apply with a soft brush or by spraying at 8-30 °C. Stir the container well and apply 5-6 coats. For a high-gloss finish, finish with RAPIDCLEAR or a high-gloss lacquer. Intermediate sanding is not necessary within 72 h. If the interval is exceeded, sand the surface lightly (P280-320).Technical dataArea of application: Pigmented wood protection for interior and exterior areas above the waterlineSubstrate: All common types of wood, incl. teak

A solvent-free wood oil based on natural vegetable oils that refreshes the natural color of teak and emphasizes the grain of the wood. It also offers long-lasting protection against sea and fresh water, as well as UV radiation and weathering.SIKA Teak Oil Neutral has been specially tested to ensure that it does not attack teak decks sealed and grouted with SIKAFLEX-290 DC Pro.The light amber-colored oil is characterized by easy application and very low consumption.

Clear varnish oil with a satin finish, specially suited for tropical woods, made from wood oil, phenol, and alkyd resin. EPIFANES Woodfinish Matte is suitable as a matte topcoat over a varnish build-up of EPIFANES Hardwood Varnish Oil Gloss or EPIFANES Clear Varnish. The varnish oil has very good resistance to solvents, alcohol, and household cleaners, as well as built-in UV protection.Application: The product can be applied with a high-quality brush to a previously sanded, clean surface. 1-2 coats are recommended, and no sanding between coats is necessary within 24-72 hours.Technical DataApplication area: Matte varnish oil finishSubstrate: clean, sanded clear coat systems such as EPIFANES Clear Varnish (Art.No. 2050-001) or Hardwood Varnish Oil Gloss (Art.No. 2051-001)Coverage: Approx. 13 m²/L at 35 µm dry film thicknessColor: clear, amberThinning: Brush: Epifanes Paint Thinner (Art.No. 2059-001), Spray: Epifanes 1-C Spray Thinner (Art.No. 2059-110)Application method: Brush, roller or spray gun (professional users)Drying times (at 20 °C): Dust dry after 3 hrs, sandable after 24 hrs, recoatable after 24 hrsFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

Deep-penetrating, solvent-free, water-based teak protectant.TEAK-O-BELLO offers long-holding protection for teak and other hardwoods preventing it from weathering and graying for an extended period of time. It's water-based, environmentally friendly formulation lasts longer than solvent-based teak oils and sealers and protects against the formation of mold.Contains no solvents and VOC's and doesn't attack the caulking sealant on teak decks. Dries to a matte finish.Coverage. approx. 5 - 12 sq.m/l.

Water-based cleaner for teak and other tropical hardwoods. Cleans and brightens weathered and dirty wood surfaces. Renews original color tone without attacking deck caulking sealant.Can be applied quickly and easily, suitable for both salt and fresh water areas. Ideal for preparing the wood for further treatment with EPIFANES Teak-O-Bello Teak Protector.Coverage: ca. 7 qm/l.

High-quality cleaning agent for teak and especially teak decks that are grouted, glued and sealed with SIKAFLEX.It removes dirt, salt residues and algae and at the same time brightens up grayed and weathered teak. It is also ideal for cleaning teak furniture. Complies with REACH guidelines and is biodegradable (EC 648/2004).Application: The wood to be treated should be soaked in water before use. Depending on the degree of soiling, the cleaner is worked in directly or diluted with water using a brush or an abrasive pad in the direction of the grain. After a short exposure time, the surface can then be rinsed with fresh water.

Especially efficient, alkaline cleaner, which removes old and persistent dirt and traces of decay, as well as dissolving remains of old oil treatments of teak.This treatment is surface-friendly since the old coats of paint do not have to be sanded off. Afterwards the wood is clean and ready for subsequent conditioning like brightening with TEAK-BRIGHTENER 2 and maintenance with TEAK-OIL 3. - it cleans timber pores deep-down of dirt. - removes remains of former oil treatments from below the surface. - Stained surfaces regain their former homogeneous, uniform look from the treatment. Shade of colour: green shaded, milky transparent.Yield approx.. 200 ml/m².

A cleaning and brightening agent for treating grayed wood surfaces. The formulation of LE TONKINOIS Wood Brightener is based on nature-identical oxalic acid and coconut fatty acid active ingredients and is suitable for hard- and softwood in outdoor areas, such as decking or garden furniture. The brightener reliably removes weather-related discoloration and prepares the wood for subsequent surface treatment.Application: Shake well before use and apply generously with a brush. Do not use in direct sunlight. Moisten wood with water if necessary. After a reaction time of 10–15 minutes, scrub with a hard brush or abrasive fleece and water. Then rinse thoroughly with water and allow to dry completely. The surface will be rough afterward and should be sanded before further treatment.Technical DataApplication area: Brightening and cleaning of grayed hardwood and softwood, e.g., decking and garden furnitureSubstrate: All woods, roughly pre-cleanedCoverage: Min. 100 ml/m², depending on the wood's absorbencyApplication method: Brush and scrubberDrying times (at 20 °C): 1–2 days depending on weather conditionsFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

Matte-drying, deeply penetrating impregnation oil that prevents graying and contamination of teak woods for months. Based on alkyd resin and linseed oil. Can be easily applied with a wide brush or cloth until the wood is saturated.Suited for Maintenancse of exterior teak such as bar decks, rub rails, gratings and jetty planks. Attention: due to the possible risk of self ignation, keep the used cloth soaked in water.Coverage: approx. 9 m.sq./l.

A powerful intensive cleaner especially for heavily soiled or oiled wood in outdoor areas. OWATROL DEEP CLEANER reliably removes old teak oil, grayed residues and stubborn deposits from decks, furniture or superstructures made of teak and other hardwoods. The product has a deep-cleaning effect and prepares the surface perfectly for subsequent care treatment with fresh oil or cleaner. Thanks to its gel-like consistency, DEEP CLEANER can also be easily applied to vertical surfaces and rinsed off with water without leaving any residue. It is ideal for basic cleaning before using OWATROL DECK CLEANER or maintenance oils such as DEKS OLJE D1.Application: Cover areas that are not to be treated, including metallic surfaces, before use. Apply DEEP CLEANER evenly with a sponge, brush or fur roller. On soft wood, veneer or plywood and for cleaning work, use DEEP CLEANER diluted 1:1 with water. Allow to work for 15 to 30 minutes, checking from time to time whether the desired removal has taken place. Wash off with fresh water and a brush or high-pressure cleaner (max. 60 bar). Wash off residues thoroughly with warm water. Neutralize porous, absorbent surfaces, especially wood, immediately after washing with OWATROL DECK CLEANER. &nbsp

Description Yachtcare Teak Oil 3 is an air-drying natural oil for the protection and care of teak wood. Thanks to its excellent penetration properties, it protects the wood exposed to weathering from the inside. It is particularly well suited for use on teak outdoor use. Teak Oil 3 penetrates completely into the wood and protects it effectively against moisture and weather conditions. It also contains UV protection and slows down greying. The oil does not form a layer on the surface and the non-slip safety especially on treads on board is retained.  Consumption: approx. 100 – 200 ml/m², depending on the wood.

TEAK-BRIGHTENER 2 is a cleaner as well as brightener for weathered and greyed wood. It penetrates deep below the surface and cleans pores deep-down. It does not bleach or damage the wood in the process, but returns its former natural and full colour. The treatment with TEAK-BRIGHTENER 2 is surface-friendly since the old coats of paint do not have to be sanded off. Coats of paint, adhesive bondings or sealings will not be damaged by the cleaning process. - It cleans timber pores deep-down of dirt. - The original wood hue will return without sanding. - The wood will regain its former natural and full colour. Yield: when the wood is heavily greyed, undiluted approx. 200 ml/m², when cleaning (diluted 1:5 with water) approx. 50 ml/m².

This unique canvas bucket is produced in small quantities - handmade in Germany. Actually, every bucket is unique.Exceptional advantages of a canvas bucket are that when thrown overboard it won't damage the hull or paint job. Also, it can stow in small spaces.Made from strong sailcloth, with rope rings sewn on top and bottom. Spliced rope handle with sewn-in eye.Available in naturally coloured raw line-canvas, not rot-proof! or in tan (red-brown) rot-proof DURADON sailcloth.Bucket dimensions: diameter 20 cm, height 28 cm.

Heavy black rubber marine bucket with galvanised loop handle.Bosun's quality, from the commercial shipping industry.An optional retrieving line (Article-No. 1076-100) of 10 mm SPLEITEX rope with a traditional crown knot at the end can be spliced to the handle.

Wooden ANCHOR scrubber: Soft polyamide bristles, with handle socket.Wood: beech 250 x 74 mm.Bristles: lenght 65 mmHandle sold separately.

Heavy duty sheet steel impact bucket with sturdy carrying handle including steel thimble, strong rim and banded iron base.The robust, durable ship's bucket is suitable for continuous use in industrial, commercial and private areas.All steel parts are hot-dip galvanised (according to DIN EN ISO 1461).The bucket is non-combustible (according to DIN 4102 building material class A1 and DIN EN 13501-1).As an (optional) rope (Article-No. 1076-100 - see further down on this page under "Accessories") we will be happy to splice in 10 mm SPLEITEX cordage, with a traditional halyard ladder knot at the end.

Pick-up rope for our buckets.Line made from 10 mm SPLEITEX rope.Length 2.00 m, ready spliced to the bucket and with traditional crown knot at the other end of the line.Shipping only in combination with a bucket, the bucket must be ordered seperatly.

Lightweight plastic bucket with galvanized handle.An optional retrieving line (Article-No. 1076-100) of 10 mm SPLEITEX rope with a traditional crown knot at the end can be spliced to the handle.

Practical all-purpose brush type hedgehog, with blue PP bristles on a plastic body.This deck brush enables one to reach every nook and cranny! Made in Denmark by VIKAN-MARINE. Every common household handle for the German socket can be used.Comes without handle, please order handle separately.

Ideal for deck washing: Dweil made of twisted fibers with plastic head.Any standard household handle with German thread can be used!Supplied without handle, please order separately.

Aluminium handle with thread for the German socket, L = 1,30 m. Suitable for VIKAN brush and deck mop with German socket. Hint: Articles over 1.10 m length get shipped freight. See Shipping Costs.

Exactly drilled wood handle, uncoated. Attaches to our Anker or UNION scrubbers. Dimensions: diameter 24 mm, length 1.40 m. Hint: Articles over 1.10 m length get shipped freight. See Shipping Costs.

UNION Scrubber: Hard natural bristles.Wood: untreated beech. Size: approx. 220 x 60 mm.Handle sold separately.

Practical scrubber pads made of synthetic fleece for cleaning surfaces and removing stubborn dirt. The hand holder has two Velcro strips on the underneath to which the scrubber pads can simply be attached. Ideal for cleaning teak decks or removing algae from the underwater hull. Available in three degrees of hardness.Hand holder dimensions (LxWxH): 23.5 x 9.8 x 6.5 cmScrubber pad dimensions (LxWxH): 25 x 11.5 x 2 cm

Folding pail made from robust PVC with sturdy bottom. When filled, this bucket holds up by itself and can be folded down after use. Shipping in a practical bag for easy stowing. - capacity approx. 9 litre, - diameter 230 mm, - height 230 mm, folded 40 mm, - colour: blue.

Practical and light telescoping boathook set including a deck scrubber with plastic bristles and a cotton deck mop.The boathook is made from aluminium with a grey, detachable plastic hook which can be easily unscrewed and replaced by the scrubber or deck mop.When collapsed, the boat hook measures only 1,20m; the total length of the extended boat hook is 2,10m.

Practical onboard aid, for example, to hold yourself fast while cleaning the hull (from a dinghy).Quality manufacture in Germany.Handle body and suction lever made of plastic, TÜV certified, strength 60 kg.Size 320 x 120 x 83 mm, weight 0.5 kg.

Cleaning and protective glove for general on-board use. It offers reliable protection against cuts when working on sharp-edged parts and sharp corners. A flexible, close-meshed chain mesh made of stainless steel enables a high level of wearing comfort with unrestricted mobility of the hand.&nbsp