- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats, clutches & CLAMCLEAT
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Bronze mainsheet traveler car
Classic mainsheet traveller car made of dark cast bronze with a finely matt tumbled finish. Suitable for 25 × 4 mm WILMEX deck tracks. With a central bore for attaching the mainsheet tackle, as well as lateral attachment points for the turning blocks of the traveller control lines.
A typical arrangement on sailing yachts or dinghies: the traveller car runs on a transversely mounted track on a traveller beam. The mainsheet tackle is attached centrally to the car, while the traveller control lines lead on both sides via turning blocks to the ends of the beam and are used to adjust the car laterally.
€226.00*
€226.00
Prices incl. VAT plus shipping costs
| Art. No. | for track | L (mm) | B (mm) | H (mm) | D1 (mm) | D2 (mm) | weight (g) | Unit price | Delivery time | Note list | Buy |
|---|
Description
Classic mainsheet traveller car made of dark cast bronze with a finely matt tumbled finish. Suitable for 25 × 4 mm WILMEX deck tracks. With a central bore for attaching the mainsheet tackle, as well as lateral attachment points for the turning blocks of the traveller control lines.
A typical arrangement on sailing yachts or dinghies: the traveller car runs on a transversely mounted track on a traveller beam. The mainsheet tackle is attached centrally to the car, while the traveller control lines lead on both sides via turning blocks to the ends of the beam and are used to adjust the car laterally.
T-profile track made from bronze.Milled from full material, shiny polished.The tracks come predrilled (holes every 25mm for car stops) countersunk fixing holes for mounting.Finished pieces up to 500 mm and 1,000 mm lengths available.Matching end pieces and cars are available.
End pieces, exactly matching the cast WILMEX deck tracks. Also suitable for our lightweight brass deck tracks.Made from polished cast bronze.
Made from special marine brass, the traveler, also known as horse, is used to pass over the mainsail or headsail when going overstay. Stylish on ships with a classic, traditional look, e.g. flat-bottomed ships, open boats or classic yachts.Beautifully designed, with deck plates and stops. The bracket bar has end threads for bolting to the deck. To accommodate the foot block of the mainsheet or jib sheet, the straight spillway guides a waisted slide or sliding carriage made of bronze, which ensures controlled passing thanks to its wide design.There are various possible applications. For example, the fitting can be used on the floor of the cockpit or helm or on the aft deck as a mainsheet bracket or in front of the mast as a foresail light carriage. Another application is mounting at the stern directly above the tiller, as is common on Dutch flat-bottomed yachts.The horse can be supplied in various sizes on request.
Made from cast bronze, equipped with a strong strap for the main sheet block.Surface: tumbled with matt finish, European make.
Made from special marine brass, the traveler, also known as horse, is used to pass over the mainsail or headsail when going overstay. Stylish on ships with a classic, traditional look, e.g. flat-bottomed ships, open boats or classic yachts.Beautifully designed, with deck plates and stops. The bracket bar has end threads for bolting to the deck. To accommodate the foot block of the mainsheet or jib sheet, the straight spillway guides a waisted slide or sliding carriage made of bronze, which ensures controlled passing thanks to its wide design.There are various possible applications. For example, the fitting can be used on the floor of the cockpit or helm or on the aft deck as a mainsheet bracket or in front of the mast as a foresail light carriage. Another application is mounting at the stern directly above the tiller, as is common on Dutch flat-bottomed yachts.The horse can be supplied in various sizes on request.
Simple slide with cleanly rounded swiveling fairlead.Matches 20 x 3 mm track, for daysailers, dinghies, and small keelboats.Cleanly worked from polished brass.With spring-loaded stopper.
Brass T-profile track for daysailors, cruisers, and small keelboats.matt finish, with a backing strip of grey acetal.Holes for screws and car stops.Matching bronze end pieces, polished finish are available separately.
Solid traditional slide with fixed eye made of cast bronze with a finely tumbled matte surface. Designed to run on mast and deck tracks with T-profile. Equipped with a spring-loaded stopper that enables secure fixation on the track.The slide is available in two sizes and fits the corresponding tracks (see related items). It is suitable for classic rigging setups – for attaching blocks, barber haulers or adjustable control points on mast or boom. Installation is carried out by simply inserting the slide into the open end of the track.Technical features· Material: bronze· Surface: finely tumbled matte finish· Cast eye· Spring-loaded stopper grip· Application: mast or deck track systems· Made in Europe
Simple slide with Tufnol pulley.Matches 20 x 3 mm track, for daysailers, dinghies, and small keelboats.Rolled bronze.With spring-loaded stopper.
Strong slide with Tufnol pulley.Matches 25 x 4 mm track, for larger daysailers, dinghies, and small keelboats.Cleanly worked from polished bronze.With spring-loaded stopper.
Classic mainsheet traveller car made of dark cast bronze with a finely matt tumbled finish. Suitable for 25 × 4 mm WILMEX deck tracks. With a central bore for attaching the mainsheet tackle, as well as lateral attachment points for the turning blocks of the traveller control lines.A typical arrangement on sailing yachts or dinghies: the traveller car runs on a transversely mounted track on a traveller beam. The mainsheet tackle is attached centrally to the car, while the traveller control lines lead on both sides via turning blocks to the ends of the beam and are used to adjust the car laterally.
