Go to homepage
€0.00*
Jobs
Catalogue
Quick order
4202-939 A4-Endmutter 10-32UNF für 33-Schaltkabel
4202*01 Endstücke für Schaltkabel
Different accessoires and fittings for standard push-pull cables.
Fit either Type 23 and 33 and RCS with 10-32 UNF thread.

from €1.00*

€1.00*

Prices incl. VAT plus shipping costs

description
for cable
thread size (inch)
B (mm)
D (mm)
Stk
View article in the TOPLICHT catalogue

Description

Different accessoires and fittings for standard push-pull cables.
Fit either Type 23 and 33 and RCS with 10-32 UNF thread.

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
RCS-Push-Pull control cable
RCS-Push-Pull control cable
If maximum ease of movement, particularly small bending radii or greater power transmission between gearshift and machine are required, RCS-Marine push-pull cables should be used.Type 284V:Stroke 76 mm,Bending radius 51 mm,End thread No.10-32 UNF,Outer diameter = 9 mm,max. deflection 8°,Color blue.All end parts made of stainless steel, Teflon-coated core, steel-reinforced plastic sheathing, permanently lubricated, effective end seals.Available in lengths from 1 m to 20 m in 25 cm increments. (Delivery time approx. 1 week).

From €109.00 *
Details
PUSH-pull cable MAXFLEX Typ3300C
PUSH-pull cable MAXFLEX Typ3300C
High-quality, smooth-running branded shift cable for pressure (max. 35 kg) and tensile force transmission (max. 70 kg) between shift lever and machine system.Stainless steel inner core with rolled-on threaded terminals, steel-reinforced nylon sheath with patented inner octagon for smooth operation.Outer diameter 9 mm, end seals against water and dust, end swivel range max. 8°, stroke max. 75 mm.Smallest bending radius 200 mm.Inch fine thread No.10-32 UNF.Also available in intermediate lengths (1' increments) and in longer lengths up to 40'.

From €24.89 *
Details

More Products from Category Push pull cables

Accessories and fittings for control cables Typ 40
Accessories and fittings for control cables Typ 40
Different accessoires and fittings for push-pull cables.Fits Type 43 with 1/4"-28 UNF thread.

From €1.50 *
Details
Accessories for control cable Typ 23, 33 und RCS
Accessories for control cable Typ 23, 33 und RCS
Different accessoires and fittings for standard push-pull cables.Fit either Type 23 and 33 and RCS with 10-32 UNF thread.

From €1.00 *
Details
Accessories for stop cable MAXFLEX
Accessories for stop cable MAXFLEX
Works with stop cable (see below: "Suitable items") . Retractor: of pressed plate stainless steel 1.3 mm, mirror polished.Dimensions: 110 x 47 mm.

From €6.90 *
Details
Dual station transfer unit
Dual station transfer unit
The double or two-station connectors (DS units) are required to connect the type 33C control cables of two control stations, for example on yachts with two control stations or motorboats with flybridge and inboard control station.The units are mounted in the engine room in front of the gearbox or injection pump and connected with two switching cables. Two units are required (one each for gearbox / injection pump).The control levers of both control positions must be in neutral to change control position.Maximum shift travel 75 mm.Material: Base plate 145 x 60 mm made of aluminum with plastic cheeks and stainless steel guide axles.Supplied complete with fork end piece.InstallationSee also photos 3-71. before installation, the plastic/rubber protective caps at the end of the cable must be removed from the two cables that are fitted to the station connector.2. the sliding carriage of the connector must first be removed by unscrewing the plastic end caps. The first cable is then pushed into the middle tube and screwed on as far as it will go, there is a thread in the tube. The brass extension is now screwed onto the protruding thread.3. the second cable is now screwed onto the top of the plastic slide using the clamp, which fits exactly into the recess in the cable. The screws are held in place by nuts, which are placed in the hexagonal recesses at the bottom.4. the slide rail is now fitted back into the base plate and secured with the two plastic bridges.

€119.00 *
Details
Engine stop cable
Engine stop cable
For the shut-off on diesel engines or as a choke cable.Stainless steel inner core, D = 1.9 mm, one side with threaded terminal and plastic pull handle (color may differ from picture), open on the other side.Steel-reinforced nylon sheath, black.With fixing fitting and nut on the handle side.

€139.00 *
Details
KOBELT 2090 pull cable for dual station controls
KOBELT 2090 pull cable for dual station controls
Pull cable KOBELT 2090: Special pull cable to connect master (main) and remote (auxiliary) stations in a two stations system KOBELT 2091 / 2093 or 2092/2094.Two cables are required for each machine to connect the stations (one cable each for speed and gearbox).In addition to the lengths specified here, which we have in stock, the cables can also be customised according to your exact length specifications. Please order the cable 4908-000 here in the webshop and specify the desired length in the last step of the ordering process under "Remarks".Alternatively, you can of course also request a customised quotation by telephone or e-mail.Lengths up to 10.00 m are available. The delivery time for customised dimensions is approximately one week.

From €272.00 *
Details
PUSH-pull cable MAXFLEX Typ3300C
PUSH-pull cable MAXFLEX Typ3300C
High-quality, smooth-running branded shift cable for pressure (max. 35 kg) and tensile force transmission (max. 70 kg) between shift lever and machine system.Stainless steel inner core with rolled-on threaded terminals, steel-reinforced nylon sheath with patented inner octagon for smooth operation.Outer diameter 9 mm, end seals against water and dust, end swivel range max. 8°, stroke max. 75 mm.Smallest bending radius 200 mm.Inch fine thread No.10-32 UNF.Also available in intermediate lengths (1' increments) and in longer lengths up to 40'.

From €24.89 *
Details
RCS-Push-Pull control cable
RCS-Push-Pull control cable
If maximum ease of movement, particularly small bending radii or greater power transmission between gearshift and machine are required, RCS-Marine push-pull cables should be used.Type 284V:Stroke 76 mm,Bending radius 51 mm,End thread No.10-32 UNF,Outer diameter = 9 mm,max. deflection 8°,Color blue.All end parts made of stainless steel, Teflon-coated core, steel-reinforced plastic sheathing, permanently lubricated, effective end seals.Available in lengths from 1 m to 20 m in 25 cm increments. (Delivery time approx. 1 week).

From €109.00 *
Details
Standard push-pull cable type 23
Standard push-pull cable type 23
The push-pull cable type 23 is dual-purpose for outboard motors as well as inboard engines.Rust-free inner core with threaded terminals from stainless steel with UNF fine pitch thread 10-32, suitable for almost all gear drives.The gearshift cable has a max travel of 75 mm, the outer mantle (diameter 7 mm) colour is black. Smallest bending radius is 200 mm.Shipping in lengths of 5' (1,52 m) up to 20' (6,10 m).

From €30.50 *
Details
Stop cable / choke cable MAXFLEX
Stop cable / choke cable MAXFLEX
For the shut-off on diesel engines or as a choke cable.Stainless steel inner core, D = 1.9 mm, with threaded terminal and plastic pull handle on one side (colour may differ from picture), open on the other side.Steel-reinforced nylon sheath, black.With fixing fitting and nut on the handle side.The length can be shortened as required.Additional accessories (see ´Accessories´) are available:Angle bracketConnection sleeve with nutClamping nipple

From €54.00 *
Details

Last seen products