Marine multi spray LIQUI MOLY | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	packaging	Price (can)	Delivery time	Note list	Buy

Downloads

Universal marine grease for the many lubricating points on board, water-repellent, saltwater resistant and stable to ageing and liquefying.

Description

Universal marine grease for the many lubricating points on board, water-repellent, saltwater resistant and stable to ageing and liquefying.

Downloads

Questions about the product?

Last seen products

More articles from this category

EPIFANES EASY-FLOW Paint Conditioner

EPIFANES EASY-FLOW Paint Conditioner

EPIFANES EASY FLOW penetrating oil is a multi-purpose additive made of natural oils to improve the impregnating ability of one-component primers or undercoats.This product can be added to all conventional and semi-synthetic paints, even under difficult conditions, a favorable result is achieved. By adding 5-10% to the paint, visible brush strokes are avoided, thus creating a closed and smooth surface. Can also be used as an impregnating oil for wood and as a preservative oil for rusted steel surfaces freed from loose rust.This product can be reworked with conventional paints.

From €17.90 *

Marine grease LIQUI MOLY

Marine grease LIQUI MOLY

Universal marine grease for the many lubricating points on board, water-repellent, saltwater resistant and stable to ageing and liquefying.

€12.95 *

Marine multi spray LIQUI MOLY

Marine multi spray LIQUI MOLY

Universal marine grease for the many lubricating points on board, water-repellent, saltwater resistant and stable to ageing and liquefying.

€14.90 *

2504*01 OWATROL Öl / MARINE OIL Spraydose

OWATROL oil aerosol can

OWATROL OIL, which is based on natural oils and has exceptionally good penetration properties, is the basic product for many applications.It is three times wetter than water, i.e. it even creeps upwards. On rusty metal, it creeps deep into the rust pores and displaces the air and moisture (i.e. the actual cause of corrosion) even from inaccessible areas. After drying, the leaf rust can be removed more easily and the soaked residual rust is consolidated, preserved and sealed for the long term and can be painted with all turpentine-substitute thinnable paints.For use on larger surfaces or as a paint additive, OWATROL is suitable for painting from the can.Technical dataSubstrates: Rusty and bare metals (iron, steel, aluminum), new and weathered woodPre-treatment: depending on the material: remove loose rust, non-adherent old paint, oil and grease

€19.90 *

OWATROL oil paint conditioner

OWATROL oil paint conditioner

OWATROL OIL, which is based on natural oils and has exceptionally good penetration properties, is the basic product for many applications.It is three times wetter than water, i.e. it even creeps upwards. On rusty metal, it creeps deep into the rust pores and displaces the air and moisture (i.e. the actual cause of corrosion) even from inaccessible areas. After drying (24 hours at 20°C), the leaf rust can be removed more easily and the soaked residual rust is consolidated, preserved, sealed and can be painted with all turpentine substitute thinnable paints.OWATROL-OIL is also ideal as an additive (color additive) for 1-component paints. Instead of using turpentine substitute as a thinner, it significantly improves the coating and flow properties and ensures optimized adhesion without compromising the quality of the paint. On the contrary, the addition of 10-15% OWATROL OIL makes paints and varnishes even more porous and durable on the surface.OWATROL spray is suitable for minor touch-ups.Technical dataSubstrates: Rusty and bare metals (iron, steel, aluminum), new and weathered woodPre-treatment: depending on the material: remove loose rust, non-adherent old paint, oil and grease

From €13.90 *

OWATROL CIP antikorrosive primer

OWATROL CIP antikorrosive primer

OWATROL CIP is a premium primer that combines the properties of a rust protection primer and an air-drying natural oil with a high solids content and exceptional penetration properties. Thanks to the OWATROL oil it contains, CIP has a low surface tension and is three times "wetter" than water. As a result, it wets substrates optimally and also penetrates into hard-to-reach corners that may not be mechanically derusted. It penetrates even thick layers of rust down to the "healthy" metal and displaces moisture and air. Dries completely, even in thick layers. It remains elastic after drying, but the added primer makes it hard enough to be coated with a subsequent one- or two-component anti-corrosion paint. Suitable for all areas that are exposed to extreme climatic conditions, such as ballast tanks.Technical DataSubstrate: Iron, steel, cast iron, stainless steel, light metals (bare or rusted)Surface preparation:Remove loose paint and rustFirm rust may remainSurface must be dry, grease-free and cleanFor chemically exposed surfaces: thorough cleaning with water or steamTopcoat: All one- or two-component systems including epoxy, polyurethane, chlorinated rubber etc.Coverage: up to 15 m²/l (depending on substrate and rust depth)Thinner: noneApplication method: Brush, lambskin roller, spray gun (professional use)Drying times at 20 °C: Touch dry after approx. 6 hrs; recoatable after 48 hrs.Further information on applying this product can be found in the technical data sheet under “Downloads”.Safety note: Cloths soaked with drying oils can self-ignite, therefore always spread out to dry before disposal or collect in sealed metal containers.

From €39.90 *

OWATROL GELCOAT RESTORER (POLYTROL)

OWATROL GELCOAT RESTORER (POLYTROL)

OWATROL GELCOAT RESTORER, also known as POLYTROL, is a tried and tested color refresher for metals, plastics, paints and gelcoats.The product refreshes faded colors of plastic or gelcoat surfaces, regenerates faded surfaces of marble, tiles or slate and restores shine to dull surfaces without leaving a greasy or oily film.The product is acid- and silicone-free, extremely penetrating and penetrates deep and sealing into microporous surfaces.Also suitable for the care of brass, bronze and stainless steel fittings. Available as a spray (250ml) and as a can (500ml) for application with a brush.Coverage: 18m²

From €18.90 *

TRANSYL rust remover

TRANSYL rust remover

Very good lubricant, acid-free universal oil in a practical spray can for precise dispensing.Excellent screw loosener, displaces moisture, disintegrates rust and hinders new rust buildup. A good lubricant that does not attack first layers, such as metal, plastic and paint.

€19.90 *

TIKAL TIKAL TEF-GEL Anticorrosion paste

TIKAL TIKAL TEF-GEL Anticorrosion paste

Seawater proof and non-toxic insulating lubricant on the basis of a PTFE similar to Teflon.The paste protects from galvanic corrosion between different precious metals, like for example with threaded joints between stainless steel and aluminium and thereby stops the blossoming of the aluminium.Also, as a lubricant, it keeps screws and turnbuckles permanently serviceable.

From €13.90 *

Technical grease

Technical grease

All-purpose grease for the lubrication of face-to-face joints.The Vaseline is water-repellent (hydrophobic) and provides as such a perfect protection against corrosion.Free of natural resins and acids.

€4.95 *

Brass greaser

Made entirely of brass, angled base plate 80 x 72 mm for either side or floor mounting, plunger with O-ring seal. Attachment: Pipe thread 1/8" BSP, plunger dimater 44 mm.

€74.51 *

Grease hand press

Grease hand press

High-quality hand lever grease gun made to industry standards.The housing is made of powder coated steelPrecision made pump tube with an output of 1,6 ml per stroke and 400 bar counter pressure.Suitable for 400 ml grease cartridge or manual filling. connection thread M10x1.Accessories:angulated nozzle pipeand high pressure rubber reinforced hose with self-clamping 4-jaw couplers.

€41.50 *

Heavy duty greaser

Heavy duty greaser

The heavy duty greaser is made from steel (the screw-on cap is from brass).Base plate 97x97mm. The shaft and cylinder (diameter 80mm) are steel.A lead-out for the brass compression fitting is prepared.There are two sizes available: a litre and a 1/2 litre version.

From €149.00 *

Multipurpose grease

Multipurpose grease

Calcium hydrolysed grease conforming to DIN 51502, type KP2G-30 with EP (high-pressure) additives for use in situations of high pressure and/or vibration.Recommended as stern tube grease and water-resistant universal grease.Spezifications:extremely water resistant,very good adhesion with long-acting lubricating film,long greasing intervals through its very good ageing resistance,good penetration (NLGI-Kl. 2),usable from -30°íC to 120° C.The 400 g cartridge fits in commercial grease guns.

From €13.90 *

Winch grease

Soft, adhesive special grease with good saltwater and walk resistance, as well as high pressure absorbtion properties.Won't harden.

€21.96 *

Grease spray TOP 2000

Grease spray TOP 2000

Soft, adhesive special grease with good seawater and fulling resistance as well as excellent pressure absorption capacity. Not resinous.

€19.94 *

Multipurpose / bearing Grease

Multipurpose / bearing Grease

The water- and pressure-resistant multi-purpose grease ensures optimum long-term lubrication and protects against corrosion and abrasion.

€6.95 *

Penetrating epoxy zink coating HANSAZINC ST

Penetrating epoxy zink coating HANSAZINC ST

2-component epoxy primer containing zinc dust (67%) with high penetration properties, even on steel surfaces that have only been derusted by hand or water-blasted.This results in a very well adhering and robust cathodic corrosion protection layer. HANSAZINC ST tolerates residual moisture (no wetness) and slight flash rust formation.Can be painted over with 2-component paints, as well as with bitumen, vinyl and chlorinated rubber primers, but not with alkyd resin-based paints and paints containing zinc phosphate. Not suitable for use on galvanized, stainless, light or non-ferrous metals, wood, mineral substrates or plastics.Technical DataSubstrate: Steel, cast iron Surface preparation:Abrasive blasting Sa 2½High-pressure water blasting DW 3Manual derusting St 2 (up to 70 µm dry film even with residual rust/moisture)Topcoat:Recoatable with itself (max. total thickness 70 µm) without sandingRecoatable with two-component coatings after 4–14 days (intermediate sanding required)Antifoulings only with suitable intermediate coatingsCoverage: approx. 8-11.2 m²/l (depending on layer thickness)Thinner: HANSASOL EP thinnerApplication method: Brush, roller, airless spray, conventional spray gun (professional use)Drying times at 10 °C: Dust dry after approx. 3–4 hrs; recoatable after 4 hrs (recommended reference: 23 °C)Further information on applying the product can be found under “Downloads".

€115.00 *

HANSALUX U hard drying penetrating oil for metal

HANSALUX U hard drying penetrating oil for metal

Penetrating oil for the preservation of steel used traditionally in the shipping industry. The firm drying liquid on a linseed stand-oil basis is especially suited for manually derusted steel surfaces.This aromatic free preservation will be used primarily where sandblasting or the use of power-tool cleaners is not possible, like for instance inboards, in the bilge or in the chain locker. Colour: brownish transparent.Also useful for impregnating raw wood.Yield: approx.17 m²/l.

€83.90 *

LE TONKINOIS clear oil varnish

LE TONKINOIS clear oil varnish

Glossy, quick-drying, clear oil for wood and metal.Made using a special process from pure linseed oil and Chinese wood oil, contains no solvents.Good UV- and weather-resistance, durable and highly impact resistant.This varnish oil, used as ship varnish by the French navy, is intended for all woods and defatted metals.Coverage: approx. 20 m.sq/l.

From €15.95 *

Request sent successfully

Request wasn't send - a error occured. Please try again.