Go to homepage
€0.00*
Jobs
Catalogue
Quick order

FLUID-FILM lanolin spray

2717-400 FLUID FILM LIQUID AS-R Spraydose 400ml
2717-001 FLUID FILM LIQUID A 1l

from €19.50*

Content: 0.4 (€48.75* / 1 Liter)

€19.50*

Content: 0.4 Liter (€48.75* / 1 Liter)

Prices incl. VAT plus shipping costs

Available, delivery time: 6-10 Tage

In stock

model
packaging
Ds

FLUID FILM LIQUID A is a transparent, solvent-free, oil-based corrosion protection based on lanolin (wool grease) for soft coating of steel surfaces in above and underwater areas.

The product displaces water, penetrates existing rust, and forms an elastic, adhesive protective film. It was originally intended for flooding repair-needed ballast water tanks on ships, floating docks, offshore units, for flooding coating of cavities, ballast water tanks, offshore structures, and hard-to-reach areas. The protective film lasts up to two years in enclosed cavities. Additionally, it is suitable for loosening seized rust or making rusted metal parts movable. Application on damp or slightly corroded surfaces is also possible.

The product contains no solvents, is environmentally friendly, and easy to apply. Available as spray, in cans or containers (for dipping, spraying, or brushing).

Application: Application is carried out depending on the area of use by flooding, brushing, rolling, or spraying. The material should be homogenized before use. After application, the gel time when flooding is about 3–4 hours. Application is possible at any temperature. Ensure adequate ventilation and personal protective equipment.

Technical Data

  • Field of application: Single-layer corrosion protection on steel surfaces
  • Substrate: Steel (bare, rusty or damp); no special pretreatment necessary
  • Primer: not required
  • Coverage: approx. 12 m²/l at 80 µm wet film (roller, brush application)
  • Thinning: not necessary
  • Application method: Brush, roller, spraygun, flooding (professional users)
  • Drying times: none; forms a non-drying, oily protective film

For more information on application, refer to the technical data sheet under 'Downloads'.

more information
Show 4 articles
📖 View article in the TOPLICHT catalogue


Downloads

FLUID FILM LIQUID A is a transparent, solvent-free, oil-based corrosion protection based on lanolin (wool grease) for soft coating of steel surfaces in above and underwater areas.

The product displaces water, penetrates existing rust, and forms an elastic, adhesive protective film. It was originally intended for flooding repair-needed ballast water tanks on ships, floating docks, offshore units, for flooding coating of cavities, ballast water tanks, offshore structures, and hard-to-reach areas. The protective film lasts up to two years in enclosed cavities. Additionally, it is suitable for loosening seized rust or making rusted metal parts movable. Application on damp or slightly corroded surfaces is also possible.

The product contains no solvents, is environmentally friendly, and easy to apply. Available as spray, in cans or containers (for dipping, spraying, or brushing).

Application: Application is carried out depending on the area of use by flooding, brushing, rolling, or spraying. The material should be homogenized before use. After application, the gel time when flooding is about 3–4 hours. Application is possible at any temperature. Ensure adequate ventilation and personal protective equipment.

Technical Data

  • Field of application: Single-layer corrosion protection on steel surfaces
  • Substrate: Steel (bare, rusty or damp); no special pretreatment necessary
  • Primer: not required
  • Coverage: approx. 12 m²/l at 80 µm wet film (roller, brush application)
  • Thinning: not necessary
  • Application method: Brush, roller, spraygun, flooding (professional users)
  • Drying times: none; forms a non-drying, oily protective film

For more information on application, refer to the technical data sheet under 'Downloads'.

Description

FLUID FILM LIQUID A is a transparent, solvent-free, oil-based corrosion protection based on lanolin (wool grease) for soft coating of steel surfaces in above and underwater areas.

The product displaces water, penetrates existing rust, and forms an elastic, adhesive protective film. It was originally intended for flooding repair-needed ballast water tanks on ships, floating docks, offshore units, for flooding coating of cavities, ballast water tanks, offshore structures, and hard-to-reach areas. The protective film lasts up to two years in enclosed cavities. Additionally, it is suitable for loosening seized rust or making rusted metal parts movable. Application on damp or slightly corroded surfaces is also possible.

The product contains no solvents, is environmentally friendly, and easy to apply. Available as spray, in cans or containers (for dipping, spraying, or brushing).

Application: Application is carried out depending on the area of use by flooding, brushing, rolling, or spraying. The material should be homogenized before use. After application, the gel time when flooding is about 3–4 hours. Application is possible at any temperature. Ensure adequate ventilation and personal protective equipment.

Technical Data

  • Field of application: Single-layer corrosion protection on steel surfaces
  • Substrate: Steel (bare, rusty or damp); no special pretreatment necessary
  • Primer: not required
  • Coverage: approx. 12 m²/l at 80 µm wet film (roller, brush application)
  • Thinning: not necessary
  • Application method: Brush, roller, spraygun, flooding (professional users)
  • Drying times: none; forms a non-drying, oily protective film

For more information on application, refer to the technical data sheet under 'Downloads'.

Downloads

Legal information about the product
CLP Regulation
Symbols ghs02
Signalword Danger!
H phrases H225, H229
P phrases P102, P210, P251, P260, P211, P410+P412, P501
Questions about the product?

Similar products

Anti-corrosive coating
Anti-corrosive coating
Permanently elastic, slow drying, single component thick coat paint, which can be applied on surfaces conserved with FLUID FILM Liquid A and prevents washing out.Surface and moisture tolerant anti corrosive coating for areas that are difficult to reach and hard to derust, as in the bilge.Colour: aluminium grey.

From €35.90 *
Details

More products from the category Metal protection

Anti-corrosive coating
Anti-corrosive coating
Permanently elastic, slow drying, single component thick coat paint, which can be applied on surfaces conserved with FLUID FILM Liquid A and prevents washing out.Surface and moisture tolerant anti corrosive coating for areas that are difficult to reach and hard to derust, as in the bilge.Colour: aluminium grey.

From €35.90 *
Details
BALLISTOL oil
BALLISTOL oil
This world-renowned extra oil is made from the same formula since 1904. High-quality, alkyd, non-aging, non-hardening and non-resinous oil. Developed as a high quality gun oil, it cleans, protects and conserves every metal and plastic surface. It is applicable as rust penetrating oil, as well as for the lubrication of creaky hinges and the removal of tar spots. The special recipe for do-it-yourselfers, precision mechanics, in the industry and the crafts. For the application ranges from the car, motor cycle and push bike, in the household and garden, for the protection of woods and leather, for angler, hunter, marksmen to the water sports. BALLISTOL is made from natural plant extracts and is free of polluting components. Free of acids, resins, chlorinated carbon hydride, silicon and CFCs.

€5.95 *
Details
BALLISTOL oil spray can
BALLISTOL oil spray can
This world-renowned extra oil is made from the same formula since 1904. High-quality, alkyd, non-aging, non-hardening and non-resinous oil. Developed as a high quality gun oil, it cleans, protects and conserves every metal and plastic surface. It is applicable as rust penetrating oil, as well as for the lubrication of creaky hinges and the removal of tar spots. The special recipe for do-it-yourselfers, precision mechanics, in the industry and the crafts. For the application ranges from the car, motor cycle and push bike, in the household and garden, for the protection of woods and leather, for angler, hunter, marksmen to the water sports. BALLISTOL is made from natural plant extracts and is free of polluting components. Free of acids, resins, chlorinated carbon hydride, silicon and CFCs.

€12.95 *
Details
BALLISTOL PTFE Dry Lubricant Spray
BALLISTOL PTFE Dry Lubricant Spray
The BALLISTOL-TEFLON spray is suitable for clean dry lubrication of sensitive areas, free from oil, grease and silicone. The finest PTFE particles adhere even to microscopically small surface irregularities and thus ensure a reduction in static, sliding and rolling friction and protect against dirt and dust adhesion.Suitable for durable and long-lasting lubrication of rollers and bearings, slideways and guide rails, cable pulls and telescopic guides, gears and gear wheels as well as plastics of all kinds.Application: Shake well before use. Spray onto the surfaces and parts to be treated at a distance of 10-25 cm and leave to dry for a few minutes. A barely visible, dry film remains.Safety warning: Extremely flammable aerosol. Pressurized container: may burst if heated above 50°C. Causes severe eye irritation. Further information can be found below under "Downloads & Information".

€12.90 *
Details
EPIFANES EASY-FLOW Paint Conditioner
EPIFANES EASY-FLOW Paint Conditioner
EPIFANES EASY FLOW penetrating oil is a multi-purpose additive made of natural oils to improve the impregnating ability of one-component primers or undercoats.This product can be added to all conventional and semi-synthetic paints, even under difficult conditions, a favorable result is achieved. By adding 5-10% to the paint, visible brush strokes are avoided, thus creating a closed and smooth surface. Can also be used as an impregnating oil for wood and as a preservative oil for rusted steel surfaces freed from loose rust.This product can be reworked with conventional paints.

From €17.90 *
Details
FLUID-FILM lanolin spray
FLUID-FILM lanolin spray
FLUID FILM LIQUID A is a transparent, solvent-free, oil-based corrosion protection based on lanolin (wool grease) for soft coating of steel surfaces in above and underwater areas.The product displaces water, penetrates existing rust, and forms an elastic, adhesive protective film. It was originally intended for flooding repair-needed ballast water tanks on ships, floating docks, offshore units, for flooding coating of cavities, ballast water tanks, offshore structures, and hard-to-reach areas. The protective film lasts up to two years in enclosed cavities. Additionally, it is suitable for loosening seized rust or making rusted metal parts movable. Application on damp or slightly corroded surfaces is also possible.The product contains no solvents, is environmentally friendly, and easy to apply. Available as spray, in cans or containers (for dipping, spraying, or brushing).Application: Application is carried out depending on the area of use by flooding, brushing, rolling, or spraying. The material should be homogenized before use. After application, the gel time when flooding is about 3–4 hours. Application is possible at any temperature. Ensure adequate ventilation and personal protective equipment.Technical DataField of application: Single-layer corrosion protection on steel surfacesSubstrate: Steel (bare, rusty or damp); no special pretreatment necessaryPrimer: not requiredCoverage: approx. 12 m²/l at 80 µm wet film (roller, brush application)Thinning: not necessaryApplication method: Brush, roller, spraygun, flooding (professional users)Drying times: none; forms a non-drying, oily protective filmFor more information on application, refer to the technical data sheet under 'Downloads'.

From €19.50 *
Details
HANSALUX U Longstrip Oil - Penetrating Marine Oil
HANSALUX U Longstrip Oil - Penetrating Marine Oil
Penetrating oil for the preservation of steel used traditionally in the shipping industry. The firm drying liquid on a linseed stand-oil basis is especially suited for manually derusted steel surfaces.This aromatic free preservation will be used primarily where sandblasting or the use of power-tool cleaners is not possible, like for instance inboards, in the bilge or in the chain locker. Colour: brownish transparent.Also useful for impregnating raw wood.Yield: approx.17 m²/l.

€83.90 *
Details
LE TONKINOIS Clear Oil Varnish
LE TONKINOIS Clear Oil Varnish
"TONKI" - the classic! Glossy, clear varnish oil for wood and metal. The formulation of LE TONKINOIS varnish oil is based on a special formula in which high-quality linseed oil and Chinese wood oil (tung oil) are cooked together. This creates a natural product without chemical additives. The varnish oil is suitable for indoor and outdoor use as well as for application under extreme weather conditions. It forms a resistant, elastic protective film with high UV resistance and highlights the natural grain of the wood.Application: LE TONKINOIS VARNISH is applied to untreated or cleanly sanded wood. Application is done with a brush or roller; for spray application, it can be diluted up to max. 10% with the appropriate LE TONKINOIS thinner. Only one thin coat should be applied per day. Stir well before use, do not apply below 12 °C.Technical DataArea of application: Wood and degreased metals indoors and outdoors, also under extreme weather conditionsSubstrate: Untreated wood, wood-based materials, limited use on corkCoverage: 20 m²/l Thinning: Max. 5–10% with LE TONKINOIS thinnerApplication method: Brush, flat brush, sprayingDrying times (at 20 °C): Dust dry after 6–8 h, reworkable after approx. 24 h, walkable after 3 days (with 2–3 coats)Further information on application can be found in the technical data sheet under 'Downloads'.

From €15.95 *
Details
Marine multi spray LIQUI MOLY
Marine multi spray LIQUI MOLY
Universal marine grease for the many lubricating points on board, water-repellent, saltwater resistant and stable to ageing and liquefying.

€14.90 *
Details
OWATROL CIP antikorrosive primer
OWATROL CIP antikorrosive primer
Premium primer that combines the properties of a rust protection primer and an air-drying natural oil with high solids content and exceptional penetrating properties. Thanks to the formulation with OWATROL oil, OWATROL CIP has a low surface tension and is three times "wetter" than water. This allows it to optimally wet surfaces and penetrate even hard-to-reach corners that may not be mechanically derusted. It penetrates thick rust layers down to the "sound" metal and displaces moisture and air.The oil dries completely, even in thick layers given sufficient drying time. After drying, it remains elastic but is hard enough due to the added primer to be coated with a subsequent one- or two-component system such as an epoxy or chlorinated rubber primer. Suitable for all areas exposed to extreme climatic conditions, such as ballast tanks. Active ingredients: water-displacing penetrating oil and iron oxide.Technical DataSubstrate: Iron, steel, cast iron, stainless steel, light metals (bare or rusted)Surface preparation:Remove loose paint and rustFirm rust may remainSurface must be dry, grease-free and cleanFor chemically exposed surfaces: thorough cleaning with water or steamTopcoat: All one- or two-component systems including epoxy, polyurethane, chlorinated rubber etc.Coverage: up to 15 m²/l (depending on substrate and rust depth)Thinner: noneApplication method: Brush, lambskin roller, spray gun (professional use)Drying times at 20 °C: Touch dry after approx. 6 hrs; recoatable after 48 hrs.Further information on applying this product can be found in the technical data sheet under “Downloads”.Safety note: Cloths soaked with drying oils can self-ignite, therefore always spread out to dry before disposal or collect in sealed metal containers.

From €39.90 *
Details
OWATROL GELCOAT RESTORER (POLYTROL)
OWATROL GELCOAT RESTORER (POLYTROL)
OWATROL GELCOAT RESTORER, also known as POLYTROL, is a tried and tested color refresher for metals, plastics, paints and gelcoats.The product refreshes faded colors of plastic or gelcoat surfaces, regenerates faded surfaces of marble, tiles or slate and restores shine to dull surfaces without leaving a greasy or oily film.The product is acid- and silicone-free, extremely penetrating and penetrates deep and sealing into microporous surfaces.Also suitable for the care of brass, bronze and stainless steel fittings.Application: Apply and spread evenly with a brush or clean cloth, spray from a distance of approx. 30 cm. After a maximum of 10 minutes, rub the surface dry with a absorbent, lint-free cloth, removing any excess product.Technical DataApplication area: Restores color and gloss on weathered plastic, gelcoat, paint, metal, plastic partsSubstrate: dry, clean, grease-freeApplication: cloth or lint-free rag; remove excess within 20 minCoverage: approx. 18 m²/l (depending on porosity and surface)Thinner: noneApplication temperature: +5 °C to +35 °CDrying (20 °C): fully dry after 24 hrs; no buffing requiredFurther information on application can be found in the Technical Data Sheet under "Downloads".

From €18.90 *
Details
2504*01 OWATROL Öl / MARINE OIL Spraydose
OWATROL oil aerosol can
OWATROL OIL, which is based on natural oils and has exceptionally good penetration properties, is the basic product for many applications.It is three times wetter than water, i.e. it even creeps upwards. On rusty metal, it creeps deep into the rust pores and displaces the air and moisture (i.e. the actual cause of corrosion) even from inaccessible areas. After drying, the leaf rust can be removed more easily and the soaked residual rust is consolidated, preserved and sealed for the long term and can be painted with all turpentine-substitute thinnable paints.For use on larger surfaces or as a paint additive, OWATROL is suitable for painting from the can.Technical dataSubstrates: Rusty and bare metals (iron, steel, aluminum), new and weathered woodPre-treatment: depending on the material: remove loose rust, non-adherent old paint, oil and grease

€19.90 *
Details
OWATROL oil paint conditioner
OWATROL oil paint conditioner
OWATROL OIL, which is based on natural oils and has exceptionally good penetration properties, is the basic product for many applications.It is three times wetter than water, i.e. it even creeps upwards. On rusty metal, it creeps deep into the rust pores and displaces the air and moisture (i.e. the actual cause of corrosion) even from inaccessible areas. After drying (24 hours at 20°C), the leaf rust can be removed more easily and the soaked residual rust is consolidated, preserved, sealed and can be painted with all turpentine substitute thinnable paints.OWATROL-OIL is also ideal as an additive (color additive) for 1-component paints. Instead of using turpentine substitute as a thinner, it significantly improves the coating and flow properties and ensures optimized adhesion without compromising the quality of the paint. On the contrary, the addition of 10-15% OWATROL OIL makes paints and varnishes even more porous and durable on the surface.OWATROL spray is suitable for minor touch-ups.Technical dataSubstrates: Rusty and bare metals (iron, steel, aluminum), new and weathered woodPre-treatment: depending on the material: remove loose rust, non-adherent old paint, oil and grease

From €13.90 *
Details
OWATROL TRANSYL Rust Remover
OWATROL TRANSYL Rust Remover
Highly penetrating, acid-free universal oil in a practical spray bottle for precise dosing.OWATROL TRANSYL is an excellent screw remover, displaces moisture, breaks down rust and prevents new rust formation. A good lubricant that does not attack substrates such as metals, plastics and paints.Application: Shake spray thoroughly before use. Do not spray on hot surfaces. Cover adjacent areas. Spray the product onto the areas to be treated, either selectively or over the entire surface &nbspTechnical DataApplication area: Metal connections, bolts, hinges, bearings, guidesSubstrate: rusty or bare metal, plastics, paintApplication: spray canCoverage: depends on usage (spot or area-wide)Thinner: noneApplication temperature: –30 °C to +50 °CDrying (20 °C): very slow evaporation, leaves lasting lubricating filmFurther information on application can be found in the Technical Data Sheet under "Downloads".

€19.90 *
Details
Penetrating epoxy zink coating HANSAZINC ST
Penetrating epoxy zink coating HANSAZINC ST
Zinc dust-containing (67%), surface-tolerant 2-component epoxy primer with high penetration properties, even on steel surfaces that have only been derusted by hand or water-blasted. The pigment-rich formulation results in a very well adhering and robust cathodic corrosion protection layer for use above and below water.HANSAZINC ST tolerates residual moisture (no wetness) and slight flash rust formation. Can be painted over with two-component paints as well as with bitumen, vinyl and chlorinated rubber primers, but not with alkyd resin-based paints and paints containing zinc phosphate. Not suitable for use on galvanized, stainless, light or non-ferrous metals, wood, mineral substrates or plastics.Application: The mixing ratio is 93:7 (base:hardener) by volume. The pot life is 3-4 hours. Depending on the substrate, the product can be applied by spraying, brushing or rolling. On hand-rusted surfaces, the coating must be worked in intensively; a bristle brush is best suited for this. Ideal processing and surface temperatures are between 15 °C and 25 °C and at least 5 °C above the dew point.&nbsp

€115.00 *
Details
WICHARD WICHINOX Stainles Steel Passivating Paste
WICHARD WICHINOX Stainles Steel Passivating Paste
WICHINOX PASSIVATION GEL from french manufacturer WICHARD is a cleaning and passivation agent for the maintenance of stainless steel parts in maritime and industrial environments. The gel formulation makes application easier even in hard-to-reach areas and ensures effective restoration of the protective passive layer on stainless steel.The product helps to remove tarnished surfaces and light corrosion marks on stainless steel fittings from Wichard, as well as other stainless steel components such as stanchions, handrails, or fenders. Application: Dismantle the parts to be treated if possible to avoid damaging adjacent surfaces. Ensure adequate ventilation and appropriate protective measures (e.g. gloves, safety goggles) during use. Stir before use. Apply the gel to the stainless steel surfaces to be treated with a brush and allow to act for 5–15 minutes. After the exposure time, rinse thoroughly. Do not apply to galvanized, painted, or anodized surfaces. Safety Note: Contains phosphoric acid. Harmful if swallowed. Causes severe skin burns and serious eye damage.Further information can be found in the Technical Data Sheet under 'Downloads'.

€27.91 *
Details

Zuletzt angesehene Artikel