WEMA tank sensors S3 for fuel and water | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	model	length (mm)	version	Price (unit)	Delivery time	Note list	Buy

Very reliable tank sensors for water and fuels.
Measurement of the fill level is carried out contact less with the help of a swimmer with a ring magnet on reed contacts. The electronics are sealed and therefore absolutely unsusceptible.
Mounting is done with a 1 1/4" BSP thread and fitting adapters. Hence the sensors are simple to dismount and clean.

Additional lengths of up to 1200mm are available upon request.

Description

Very reliable tank sensors for water and fuels.
Measurement of the fill level is carried out contact less with the help of a swimmer with a ring magnet on reed contacts. The electronics are sealed and therefore absolutely unsusceptible.
Mounting is done with a 1 1/4" BSP thread and fitting adapters. Hence the sensors are simple to dismount and clean.

Additional lengths of up to 1200mm are available upon request.

Questions about the product?

Similar products

Adaptors for WEMA tank sensors

Adaptors for WEMA tank sensors

Accessories for the WEMA tank sensors for fuels and water and grey and black waters.The adaptors provide a 1 1/4" BSP thread which fits WEMA tank sensors.3470-100: Adaptor with 1 1/1" threads for the sensor, with 6 screws and threaded counterplate. Allows installation of the sensor in every plastic or steel tank. With gasket.3470-101: Flange with 1 1/4" threads, can be welded to a steel tank. Made from V4A inox steel.3470-102: Plasic adaptor which may be used if a VDO sensor (with flange SAE 5-hole 54mm) is to be replaced by WEMA sensor. 1 1/4" threads, 5-screw fixation as VDO sensors have. With gasket.3470-104: Counterplate with 5 threads for 3470-102. Can be used if the holes (for flange SAE 5-hole 54mm) in the tank are not threaded.

From €9.81 *

Inspection port for S3 tank sensors by WEMA

Inspection port for S3 tank sensors by WEMA

A robust flange assembly made from plastic with an integrated thread (1 1/4" BSP) for mounting a WEMA indicator.Simple fitting because of the cleverly devised construction: only a hole of 115 to 120mm has to be drilled.The central mounting bolt, a guiding pin and the O ring enable a quick opening, whereby the flange can also be used as an inspection cover.For installation you need not cutting precise holes or threads.

€36.90 *

Last seen products

More articles from this category

Adaptors for WEMA tank sensors

Adaptors for WEMA tank sensors

Accessories for the WEMA tank sensors for fuels and water and grey and black waters.The adaptors provide a 1 1/4" BSP thread which fits WEMA tank sensors.3470-100: Adaptor with 1 1/1" threads for the sensor, with 6 screws and threaded counterplate. Allows installation of the sensor in every plastic or steel tank. With gasket.3470-101: Flange with 1 1/4" threads, can be welded to a steel tank. Made from V4A inox steel.3470-102: Plasic adaptor which may be used if a VDO sensor (with flange SAE 5-hole 54mm) is to be replaced by WEMA sensor. 1 1/4" threads, 5-screw fixation as VDO sensors have. With gasket.3470-104: Counterplate with 5 threads for 3470-102. Can be used if the holes (for flange SAE 5-hole 54mm) in the tank are not threaded.

From €9.81 *

WEMA tank sensors S3H for wastewater

WEMA tank sensors S3H for wastewater

Very reliable tank sensors for grey and black waters.Measurement of the fill level is carried out contact less with the help of a swimmer with a ring magnet on reed contacts. The electronics are sealed and therefore absolutely unsusceptible.Mounting is done with a 1 1/4" BSP thread and fitting adapters. Hence the sensors are simple to dismount and clean.

From €45.90 *

WEMA tank sensors S3 for fuel and water

WEMA tank sensors S3 for fuel and water

Very reliable tank sensors for water and fuels.Measurement of the fill level is carried out contact less with the help of a swimmer with a ring magnet on reed contacts. The electronics are sealed and therefore absolutely unsusceptible.Mounting is done with a 1 1/4" BSP thread and fitting adapters. Hence the sensors are simple to dismount and clean. Additional lengths of up to 1200mm are available upon request.

From €39.90 *

Resistance converter by WEMA

Resistance converter by WEMA

This unit converts the resistance value of one indicator or sensor from 0-190 Ohm (european stadard) to 240-30 Ohm (american standard) or reversed.This device allows the combination of instruments with sensors of different manufacturer.The minimum and maximum value displayed can be adjusted.

€49.94 *

WEMA sensors

The WEMA sensors for temperature, oil pressure and rudder indicators are compatible with the gauges of different manufacturers.The bodies of the temperature sensors are made from brass, water-proof according to IP67.Some sensors are fitted with an alarm, the tolerance for temperature alarm is 3°C, the oil pressure alarm is at 0,8 bar.The rudder indicator can, without modification, serve single or double gauges with 0 - 190 Ohm.Suitable for 12 or 24V.A link to adaptors for WEMA and KUS indicators can be found under Suitable Items below.

From €23.90 *

Thread adaptors for WEMA sensors

Thread adaptors for WEMA sensors

Adaptors for indicators with 1/8" NPT connecting thread.

From €14.49 *

Inspection port for S3 tank sensors by WEMA

Inspection port for S3 tank sensors by WEMA

A robust flange assembly made from plastic with an integrated thread (1 1/4" BSP) for mounting a WEMA indicator.Simple fitting because of the cleverly devised construction: only a hole of 115 to 120mm has to be drilled.The central mounting bolt, a guiding pin and the O ring enable a quick opening, whereby the flange can also be used as an inspection cover.For installation you need not cutting precise holes or threads.

€36.90 *

Lever arm sensor for fuel tanks

Lever arm sensor for fuel tanks

Lever arm sensor with a SAE-5-hole flange.Flange diameter: 54mm.Adjustable for tanks from 200 to 600mm height.180 Ohm = full3 Ohm = empty

€79.90 *

Tank sensor TGT for fuel or waste water TUROTEST

Tank sensor TGT for fuel or waste water TUROTEST

Mechanical tank sensor TGT for diesel and wastewater tanks. Works with the tank gauges of the TUROTEST instrument series. The stainless steel tube sensors are a German product.High resolution (a switching point every 17mm).5 (empty) to 180 (full) ohms.Thread 1.1/4".Comes with a plastic flange and gasket.Lengths of up to 800mm are available on request.

From €115.89 *

PHILIPPI TGW tank sensor for water tanks

PHILIPPI TGW tank sensor for water tanks

Mechanical tank sensor TGW for fresh water.For gauges of TUROTEST series. The stainless steel tube sensors are made in Germany.High resolution (a switch point every 17mm), thread 1 1/4".5 (empty) to 180 (full) ohms.Comes with mounting flange and gasket.

From €122.90 *

Temperature sensors for marine gauges

Temperature sensors for marine gauges

Temperature sensors for marine gauges. These sensors can be used with a variety of instrument gauges, particularly those made by VDO (VIEWLINE) or Kienzle (KIENZLE CLASSIC).Other sensors are available on request.

From €29.90 *

Pressure sensor (oil) for marine gauges

Pressure sensor (oil) for marine gauges

Oil pressure sensor for VDO compatible display instruments. These sensors can be used for various instrument series, including those from the manufacturers VDO (VIEWLINE) or KIENZLE (KIENZLE CLASSIC).Specifications:Thread: M10 x 1 conical shortResistance values: 10 - 184 OhmOutput: 2-pole mass-freeNo warning contactOther sensors are available on request.

From €89.95 *

Rudder sensor for marine instruments

Rudder sensor for marine instruments

Rudder angle sensor for marine gauges. Available for a single gauge or two gauges.These sensors can be used with a variety of instrument gauges, particularly those made by VDO (VIEWLINE) or Kienzle (KIENZLE CLASSIC).Other sensors are available on request.

From €97.50 *

Lever type sensor for fuel tank gauges

Lever type sensor for fuel tank gauges

Lever type sensor for fuel tank. For marine gauges. For tanks 150 to 605 mm deep. Can be adjusted for different tank depths..These sensors can be used with a variety of instrument gauges, particularly those made by VDO (VIEWLINE) or Kienzle (KIENZLE CLASSIC).Other sensors are available on request.

€74.95 *

Capacitive sensor for waste tank VDO N02-240-902

Capacitive sensor for waste tank VDO N02-240-902

Capacitive sensor for waste tank and black water tank. For marine gauges which work with a capacitive sensor.. For tanks 200 - 600 mm deep.Measures the tank without any moving parts.Signal 4-20 mA.Thread 1 1/4" BSP, with matching plasic flange SAE-5-hole and seal.These sensors can only be used with gauges for capacitive sensors, particularly those made by VDO (VIEWLINE) or Kienzle (KIENZLE CLASSIC).The gauge must beordered separately (please check "Suitable items").

€309.95 *

Capacitive sensor for fresh water tank gauge

Capacitive sensor for fresh water tank gauge

Capacitive sensor for fresh water tank. For tanks 80 - 600 mm deep.This sensor may only be used with gauges for capacitive sensors, particularly those made by VDO (VIEWLINE) or Kienzle (KIENZLE CLASSIC).

€205.00 *

Rudder angle feedback unit KOBELT 7168

Rudder angle feedback unit KOBELT 7168

Sturdy feedback unit KOBELT 7168, e.g. for the electronic rudder indicators KOBELT 7175 or 7180. This feedback unit is used to transmit rudder angle positions to a rudder angle indicator,an autopilot or to electronic steering components. Its compact design and watertight construction will allow it to be installed in tight quarters. With its all bronze and stainless steel construction it is well suitable for operation in rough environment. Comes as: 7168-P: 1 potentiometer to transmit data to one device (e.g. rudder indicator) 7168-PP: 2 potis to transmit data to two devices (e.g. rudder indicator and autopilot). Standard potentiometer is 1 kOhm.Operating voltage 12 V / 24 V.Weight: 1 kg.Comes with connection rod 250 mm with ball joint terminals.

From €725.00 *

Ultrasonic tanksensor TUROTEST UTV

Ultrasonic tanksensor TUROTEST UTV

Non-contact tank sensor for ultrasonic tank gauge. For water, diesel, grey water or waste tanks. The use of ultrasonic technology means that there are no moving parts required in the tank.Works perfectly in plastic tanks. Not suitable for metal tanks.The sender is mounted in top of the tank (bolt circle diameter of 53 mm per SAE with 5 holes) and can even replace a mechanic sensor (with appropiate gauge). Sensors are available for tank depths up to 800 mm.The distance washer has a height of 25 mm; the height can be varied by using several washers.Voltage 10-30 volts,Power draw 50 mA,Output signal 0.5 - 2.5 volts.The matching gauges please find listed at "Suitable items" below.

From €109.00 *

VERATRON tubular type sensor for tank gauges

VERATRON tubular type sensor for tank gauges

The DEEP-PIPE immersion tube sensor is the ideal sensor for fuel tanks. The level is measured by a float enclosed in a vertical tube (diameter 38 mm). Small holes at the top and bottom of the tube compensate for the surge of fuel in the tank so that the float position remains stable in any sea state.Measuring range 90-4 Ohm matched to VERATRON VDO VIEWLINE marine instruments for immersion tube transducers. (see accessories)An optionally available 6 m long connection cable with TE Superseal plug can be used to make a watertight plug-in connection to the tank sensor in accordance with IP67.Other sensors are available in various lengths from 150 mm to 1200 mm.When dimensioning the corresponding length, a minimum distance to the tank bottom of 4 mm must be taken into account.

From €49.90 *

WEMA Leakage Alarm

WEMA Leakage Alarm

The WEMA water level alarm gives you an acoustic warning when the water level rises above the normal level, e.g. in the bilge.The robust switch for the alarm is mounted in the bilge at a height where there is normally no water and connected to the buzzer included. If the water inside the sensor tube rises to 80 mm, the warning buzzer switches on.Jamming of the float by foreign objects is impossible due to the surrounding V4A tube. The switching unit can be easily pulled out of the holder and cleaned. The durable design also includes the encapsulated electronics and a 3 m long connection cable with a cable cross-section of 2 x 0.75mm².The switch can also be optionally connected to a signal lamp.The maximum load capacity is 0.3 amps at 12 volts and 0.15 amps at 24 volts.The water alarm is suitable for 12 and 24 volts.

€54.95 *

Request sent successfully

Request wasn't send - a error occured. Please try again.