Tank hookup set - spare part for WALLAS heaters

Double exhaust tube: Combines the ehaust tube for conbustion gas and the fresh air inlet for combusting air. Flexible double tube, stainless steel.Diameter 28 / 45mm.To put together the installation material for your heating system, you can also use the online support atwww.wallas.fi/accessories/

On-board grommet for double hose 28/45mm.The double hose consists of the inner exhaust hose 28mm diameter and the outer fresh air hose 45mm diameter. Through the double hose, the exhaust gases are led outboard and at the same time the fresh air necessary for the combustion process is sucked in.There is a bracket on the on-board duct to which the double hose can be fixed with a hose clamp.

On-board grommet for double hose 28/45mm.The double hose consists of the inner exhaust hose 28mm diameter and the outer fresh air hose 45mm diameter. Through the double hose, the exhaust gases are led outboard and at the same time the fresh air necessary for the combustion process is sucked in.There is a bracket on the on-board duct to which the double hose can be fixed with a hose clamp.

Flexible ribbed hose, D=60mm or D=75mm, for the warm air system of WALLAS heaters.The hose is connected to the intake connection of the heater for the fresh air intake and another hose is attached to the outlet connection of the heater for the transfer of the heated air.To put together the installation material for your heating system, you can also use the online support atwww.wallas.fi/accessories/

Insulation stocking made of fibreglass, suitable for the 28/45mm double hose.

Fresh-air outlet for WALLAS heating systems. To find the best configuration for your boat, please also use the online support at www.wallas.fi/accessories/

Outlet cover with adjustable throttle flap for the 75mm or 60mm hot air system of WALLAS heaters. Made of black plastic. Heat, impact and UV resistant.When installing the warm air system, the throttle flap in the housing can be adjusted so that the desired amount of warm air is discharged at the respective orifice.The ventilation grille must be removed to correct the setting of the throttle valve later. Alternatively, the damper can also be adjusted using a long, narrow object (e.g. a screwdriver) between the grille blades.Scope of delivery:1x housing1x outlet grille (black or white)3x screws 4x15 mm1x hose clipTo assemble your installation material, please also use the online support at www.wallas.fi/accessories/

Stainless steel air inlet grille for WALLAS heaters, d = 75 mm.Is inserted into the intake connection of the heaters if no intake hose is used. The air to be heated is then drawn in directly from the area around the heater.The grille protects the heater from the ingress of small parts.

Tank hookup set for WALLAS heating systems. To find the best configuration for your boat, please also use the online support at www.wallas.fi/accessories/

Through deck exhaust for WALLAS heating systems. To find the best configuration for your boat, please also use the online support at www.wallas.fi/accessories/

Thru-bulkhead for WALLAS heating systems. To find the best configuration for your boat, please also use the online support at www.wallas.fi/accessories/

On/off switch available as an accessory for the small WALLAS 1300 paraffin heater.Useful when installing the heater behind a bulkhead or in a cupboard, for example. The switch is supplied with a 6 metre cable.

Hot air hose 1m, diameter 75mm, with outlet orifice and 2 hose clamps.Accessory for WALLAS 1300 paraffin heater.This hot air hose extension can be fitted to the WALLAS 1300 paraffin heater instead of the hot air outlet panel. To do this, the outlet panel on the heater must be removed and the outlet nozzle behind it must be turned round.Necessary when installing the heater behind a bulkhead or in a cabinet.

Small fuel tank with small footprint for diesel or paraffin, 5 litres

WALLAS No. 3419 - The THERMO TWIN PRO insulated air duct from WALLAS is used to conduct warm air in on-board heating systems.The hose is designed for use with hot air heating systems and its insulated design enables low-loss air routing, even over longer distances. compared to a standard hose, heat losses are reduced by 40 %.With an internal diameter of 75 mm and a length of 4 m, the air duct is suitable for distributing heating air in cabins and adjoining rooms. The outer diameter is 90 mm.The construction consists of a flexible air hose with integrated insulation. This reduces the heat dissipation along the hose and at the same time lowers the surface temperature. This supports efficient heat distribution in the system and minimizes condensation.The air duct is designed for connection to corresponding heaters and air distributors with a 75 mm connection diameter.Please note! The product is sold per piece, one piece is 4 meters long.

WALLAS warm air hose connector made of aluminium with two matching hose clamps.

Y splitter for WALLAS heating systems. To find the best configuration for your boat, please also use the online support at www.wallas.fi/accessories/