DICKINSON exhaust hood

A stainless steel flue pipe T-piece with integrated draught regulator. The draught regulator is used as the first or second piece of pipe from the top of the stove or oven. The draught regulator helps to reduce the draught in long chimneys and allows the user to operate the appliance at a lower fuel setting.The draught reduction is adjustable. For this purpose, the pendulum damper is adapted to the respective chimney installation via an adjustable counterweight.Recommended for all installations and especially for chimneys with a height of 6 feet or more.As a Dickinson general importer and specialist wholesaler, we stock almost all original spare parts and accessories. Parts not listed here are available on request.

As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

Exhaust hood for DICKINSON stove pipes.H - shaped, for difficult ventilation situations.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

Exhaust hood for DICKINSON stove pipes.Rain-proof standard hood, made of stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

We offer a suitable adapter so that the REFLEKS gas flue system can be used with DICKINSON ovens or stoves without any problems.Installation is very simple:The original flue gas connector is replaced by a REFLEKS adapter. This is attached with just two screws and can be replaced in just a few minutes. The REFLEKS pipes can then be fitted directly and securely.Under the following link, DICKINSON offers various interesting videos to assist with the maintenance, repair and installation of ovens and stoves:https://www.youtube.com/@DickinsonMarine-since1932As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

Pipe elbow for DICKINSON stove pipes.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

DICKINSON deck sleeve made from stainless steel, fits DICKINSON stove pipes. delivery with inner ring (the inner ring can also be orderd seperatly). Matching covers (for when the pipe or hood is put below) are available. As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

Stove pipe for DICKINSON stoves and ovens.Stainless steel.As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

Heater with which radiant heat from the exhaust pipe system is diverted to other rooms.Instead of a 550 mm stove pipe, HEATEX is used in the pipe system. It consists of a 550mm tube jacketed by a heat exchanger. On the back there is a flange with which DICKINSON pipes or flexible exhaust hoses are connected to the fan. When the fan is switched on, the heat is sucked in through the connecting line and distributed in the room.The scope of delivery includes the heat exchanger, the fan (12 or 24 volts) and a pipe angle.All parts are made of stainless steel.

Replacement fire grate for the DICKINSON NEWPORT solid fuel stove. Material: A4 stainless steelAfter several years of heating operation, the fire grate may need to be replaced.Original DICKINSON spare part.

DICKINSON uses WALBRO pumps from the FRD series to reliably supply diesel ovens and stoves with diesel. They enable the safe operation of heating appliances, even under demanding installation conditions.Various models are available depending on the delivery head and climatic conditions:the standard pump FRD-2 (20-000) for simple installations and the more powerful heavy-duty versions FRD-3 (20-002A) and FRD-4 (20-002) with adjustable pressure regulator for longer delivery distances or use in very cold temperatures.

Diesel heaters and stoves that burn fuel in a bowl burner are dependent on an uninterrupted, coordinated fuel supply to ensure that the flame does not go out or start to blacken.The task of the oil regulator is to constantly supply the correct amount of oil to the heater or stove.The adjustable oil regulator from DICKINSON regulates the correct oil supply to the burner bowl and ensures a safety shutdown via a float if the flame goes out unintentionally.It works without fault-prone electrics or electronics and is therefore particularly reliable. The regulator has a safety cut-out integrated into the control knob, which permanently interrupts the oil supply at temperatures above 75 °C.Dickinson offers a variety of interesting videos at the following link to help with the maintenance, repair and installation of stoves and ranges:https://www.youtube.com/@DickinsonMarine-since1932As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory. 

As a Dickinson importer and wholesaler, we carry just about every original spare part and accessory.

Small reflector plate for heat protection behind flue pipes.Plate stainless steel.Measurements:50cm high, 15cm wide.Available as flat or recessed version.The flat plate must be mounted with spacers or insulation behind, the recessed plate can be mounted directly on the wall.