- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Cleats
Heavy, robust jam cleat of cast gunmetal from the traditional DAVEY London company.The cleat is cleanly polished and has two holes for screwing on.Straight underside.Suitable for ropes with a diameter of 12 to 16 mm.
Pfeiffer Marine cleat made of aluminium, silver anodised.Classic mooring cleat / mooring cleat used on many yachts. Available in various sizes.The cleat is mounted from above with countersunk screws through four mounting holes in two bases (feet).Alternatively, this cleat shape is also available for mounting with two countersunk screws from above through the cleat - see "Similar products".
Beautiful designed bar cleat for cruisers and small yachts with solid bronze stands and an oval teak bar (L 250 mm).The bollard stands were designed in the 30s and have an extended lower flap through which the bar is fixed by a screw. The extension also protects the wood when a line is veered.The stands are also available separately, for example for a hand rail.
Strong, beautifully designed bar cleat with solid bronze stands and an oval teak bar, designed for large classic yachts.The bollard stands from tumbled bronze with matt finish have extended lower flaps on both sides, which protect the wood when a line is veered.
Very strong bronze cleat with a bar in the typical Herreshoff design and with very long studs, in order to be able to belay a couple of thick mooring lines on the cleat.This cleat was designed with a large classic cutter yacht in mind.Solid cast bronze without bore holes, surface: tumbled matt finish.
Beautiful, slim design of the classic deck cleat. The high legs allow several lines to be laid at the same time. The dark cast bronze fitting is of European manufacture. The strong design and four well-dimensioned countersunk holes ensure sufficient strength on deck.Surface: fine matt tumbled.
In the classic design of deck cleats, though with higher studs so that thicker lines can also be belayed.Solid cast bronze, surface tumbled matt finish. Made in Europe.
Deck cleat with a lowered centre in the bar, so that the crossing ropes do not come up too high.Made from very strong cast bronze and solid legs.Surface: tumbled matt finish.Shipping without bore holes.
Solid bronze jam cleat for 8-10 mm strong lines. The centre part of the cleat forms a fairlead eye in between the studs. The jammed line does not create a chocking effect on the screws and does not chafe the varnish. Surface: tumbled with matt finish.
Inexpensive, robust jam cleat made from black plastic.Particularly suitable for sheets.
Scandinavian bollard cleat in a classic design. Features a round wooden bar made of Kebony, a teak-like thermowood, and a high-quality, authentic brass base manufactured in Sweden, available with either a polished or chrome-plated finish.The fitting is 67 mm high and the base has a diameter of 44 mm. Includes M10 stainless steel fixing bolts, 45 mm long.The bar and fitting are shipped separately. Replacement posts are available as accessories.Features of KebonyDurableDimensionally stable (minimal swelling/shrinkage)Low-maintenance: can be adequately maintained with saltwater or lubricating soap or green soapResistant to rot, mold, and insect infestationNatural wood appearance. Initially a chocolate-like brown tone; after about 1 year, it weathers to a silver-gray color like teakIf the wood is sanded, sawed, or planed (all of which can be done without any problems), the brownoriginal brown hueTreatment with varnish or (teak) oil is possibleFully recyclable or can be disposed of like “regular” woodYou can find detailed information about KEBONY wood here.
