- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Cleats
Brass cleat with curved base for direct attachment to the spar (bearing radius 41 mm). In addition to being used as a mast cleat for halyards, it can also be used on the main boom to attach reefing tackles and stretchers or on the jib boom to attach the jib ringhaul or the water stay. The elegant cleat is produced by WILMEX and is designed for rope diameters of 10-14 mm.
WILMEX Cleat. Heavy design with massive mounting plate and strong foot.Polished cast bronze.
Well designed cleat with angular, arched legs especially suited as mast cleat.Made from bronze with a glossy finish.
Typical American solid bronze cleat.Cast bronze, tumbled matte finish.This strong design with straight bar and four appropriately-sized countersunk screw holes ensures exceptional strength on deck.A quality product from SPARTAN, the American manufacturer of traditional equipment.
The classic motorboat cleat: Two-footed torpedo-cleat. Slender design.Complete with two stainless steel bolts and nuts.Polished or chromed brass finish.
Strong cleat, based on a British design from the 30s.With round mounting plate and beautifully formed arms.Can also be used as an extravagant door handle.Made from hand-polished heavy cast bronze.
Strong cleat, based on a British design dating from the thirties.With round mounting plate and beautifully formed horns.Made from cast iron, hot-dip galvanized.
The classic American deck cleat, designed by Nat Herreshoff and proven for over a century.Round, tapered profile.Cast bronze, polished.
Bar cleat with round teak bar and mounting bolts M10, 45 mm lenght. Available in polished or chromed brass with teak bar. Replacement parts are available.
Spare bars made of Kebony, a teak-like thermowood, for dock cleats, mooring cleats, and bollard cleats. The 30-mm-diameter rods are available in lengths of 150 and 250 mm, while the 40-mm-diameter rods are available in a length of 350 mm. Neatly finished round wood.Properties of KebonyDurableDimensionally stable (minimal swelling or shrinkage)Low-maintenance: can be adequately maintained with saltwater or with grease soap or green soapResistant to rot, mold, and insect infestationNatural wood appearance. Initially a chocolate-like brown tone; after about 1 year, it weathers to a silver-gray color like teakIf the wood is sanded, sawed, or planed (all of which can be done without any problems), the brownoriginal brown hueTreatment with varnish or (teak) oil is possibleFully recyclable or can be disposed of like “regular” woodYou can find detailed information about KEBONY wood here.
Typical motorboat cleat, made from cast bronze, hand-polished. The cleat is delicate but of robust quality.
Functional cleat made of polished brass with a large, solid base plate. The smaller cleat has four holes, the two larger ones have six holes. Thanks to the heavy design and the base plate, this beautifully shaped cleat can withstand high loads. Well suited as a centre cleat on the foredeck.
Functional cleat with solid mounting plate and large countersunk mounting holes.Robust cleat.Heavy-duty design, made from polished bronze.
Classic straight cleat from England. Very British!The base is slightly countersunk into the deck under the mounting plate, to give the cleat a good horizontal holding.Made of hand-polished cast bronze.
Very beautiful base piece for a heavy bar cleat, designed for an oval bar.The fitting, made of cast bronze is built from two polished stands with bronze bolts and a strong and polished-bronze mounting plate. Comes complete with nuts and washers but without bar.
Small, very British cleat, with open top.Made from hand-polished cast bronze.
Bar cleat with oval teak bar.Polished- or chromed-brass mounting plate with tapped holes and stainless steel bolts M8 x 60 mm.
Thin cleat, similar to classic Herreshoff cleats.Tapered cleat with flat, oval profile.Polished cast stainless steel.
A slim designer cleat with slightly curved top.Mounting with bolts.Made from polished A4 stainless steel (AISI 316).
Functional cleat made of polished cast stainless steel (AISI316). The sides are brushed.
The authentic original Herreshoff cleat: Very robust design with hollow tapered stock and round bases (D = 58 mm). Cast bronze, hand-polished. Mounting is done by blind holes with M16 threads in the feet.Delivery without mounting bolts.
Large, heavy pillar cleat made of polished bronze, manufactured in the sand casting process by traditional manufacturer DAVEY from London. This traditional cleat was designed for larger vessels. Two M16 blind holes are provided on the underside of the cleat for attachment.
