-
Rigg & sail
- Blocks & sheaves
- Low friction thimbles & softrigging
- Shackles, carbine hooks & hooks
- Hanks
- Belaying pins
- Mast & boom
- Wind indicators
- Wire rope, thimbles & turnbuckles
- Pins & bolts
- Bosun's chair
- Rigging tools & accessories
- Sailcloth
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Filter products now
from
112 €
to
459 €
from
700 daN
to
2500 daN
Filter products now
from
112 €
to
459 €
from
700 daN
to
2500 daN
Yacht block BARTON
3 products
Single sheave wooden ball bearing block by BARTON
From
€112.00 *
Modern ball bearing blocks with a wooden housing made from varnished ash wood for lightly running halyards and sheets.BARTON sheaves made from ACETAL have large ball bearings made from DELRIN running in the outer ring, whereby the loads are distributed onto a large number of balls in all directions. These lightly running blocks have 23% less friction than those with friction bearings. The wooden chassis is firmly bolted to the core of the exchangeable sheave, which is how the design is able to obtain its large strength.The fittings are made from stainless steel, the sheaves are bronze coloured. Differing to this the 14mm block for lightly running heavy loads is equipped with a needle bearing including an inner ring from TORLON and has ball bearings made from DELRIN running in the outer ring, in order to minimise the lateral friction.


Double sheave wooden ball bearing block by BARTON
From
€136.00 *
Modern ball bearing blocks with a wooden housing made from varnished ash wood for lightly running halyards and sheets.BARTON sheaves made from ACETAL have large ball bearings made from DELRIN running in the outer ring, whereby the loads are distributed onto a large number of balls in all directions. These lightly running blocks have 23% less friction than those with friction bearings. The wooden chassis is firmly bolted to the core of the exchangeable sheave, which is how the design is able to obtain its large strength.The fittings are made from stainless steel, the sheaves are bronze coloured.


Triple sheave wooden ball bearing block by BARTON
From
€147.00 *
Modern ball bearing blocks with a wooden housing made from varnished ash wood for lightly running halyards and sheets.BARTON sheaves made from ACETAL have large ball bearings made from DELRIN running in the outer ring, whereby the loads are distributed onto a large number of balls in all directions. These lightly running blocks have 23% less friction than those with friction bearings. The wooden chassis is firmly bolted to the core of the exchangeable sheave, which is how the design is able to obtain its large strength.The fittings are made from stainless steel, the sheaves are bronze coloured.

