Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Replacement set for sea cook BLAKES POPULAR Plus.
The kit comes with bolts and nuts.

Description

Replacement set for sea cook BLAKES POPULAR Plus.
The kit comes with bolts and nuts.

Questions about the product?

Similar products

Bronze seacock BLAKES
Bronze seacock BLAKES
The BLAKES seacocks made of bronze (seawater-resistant bronze alloy CC491K - CuSn5Zn5Pb5) are characterised by a very robust, easy-to-maintain design that enables decades of use. The passage is opened and closed by means of a cone that does not require a seal and can be lubricated from the inside via a grease nipple. The valve body, the nozzle for the hose connection and the through-hull are made from a single casting, the assembly is carried out by screwing it to the hull using the enclosed bolts and a pressure plate. On the smaller valve, the enclosed pressure plate (4615-119) is designed as a sieve.Exceptionally well suited for inlets and outlets of toilets. Whether the seacock is open or closed can be immediately identified by the location of the handle.Lloyds Register Type approved. Available for a hose of 3/4" (19 mm) or 1 1/2" 38 mm).

From €229.00 *
Details

More products from the category sea cocks and valves made from bronze

Bronze ball valve with stainless steel ball
Bronze ball valve with stainless steel ball
Branded ball valve made of seawater-resistant bronze alloy CC490K with full bore and female thread on both sides. Ball and shaft are made of A4 stainless steel (AISI 316), the sealing shells are made of PTFE. Valve lever made of A2 stainless steel (AISI 304) with blue vinyl coating.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €29.00 *
Details
Bronze gate valve GUIDI
Bronze gate valve GUIDI
Sleeve gate valve with a housing of seawater-resistant bronze, heavy design with full run-through on both sides and inner threads. Hand wheel of painted steel, the shaft ist made of brass.Max. working pressure, 16 bar.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €16.51 *
Details
Bronze non-stick valve "Alex" GUIDI
Bronze non-stick valve "Alex" GUIDI
These valves, specially developed by the manufacturer GUIDI to meet the requirements of the marine industry, are an alternative to conventional ball valves or gate valves. Their design minimises the risk of corrosion and sticking or adhesion of the moving components and ensures long-term smooth operation.The housing is made of the seawater-resistant bronze alloy CC491K, chemically CuSn5Zn5Pb5-C. The passage is closed by a slightly flexible but rigid neoprene ball body that is moved into a guide. It is operated in a similar way to a gate valve by turning the compact blue plastic rotary cap. This has an open and closed indicator window so that the status of the valve can be recognised at a glance.The valve can be mounted in any position and offers full flow in both directions.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €77.00 *
Details
Bronze seacock BLAKES
Bronze seacock BLAKES
The BLAKES seacocks made of bronze (seawater-resistant bronze alloy CC491K - CuSn5Zn5Pb5) are characterised by a very robust, easy-to-maintain design that enables decades of use. The passage is opened and closed by means of a cone that does not require a seal and can be lubricated from the inside via a grease nipple. The valve body, the nozzle for the hose connection and the through-hull are made from a single casting, the assembly is carried out by screwing it to the hull using the enclosed bolts and a pressure plate. On the smaller valve, the enclosed pressure plate (4615-119) is designed as a sieve.Exceptionally well suited for inlets and outlets of toilets. Whether the seacock is open or closed can be immediately identified by the location of the handle.Lloyds Register Type approved. Available for a hose of 3/4" (19 mm) or 1 1/2" 38 mm).

From €229.00 *
Details
Bronze seacock SPARTAN
Bronze seacock SPARTAN
High-quality seacock with conical plug, the design is also known as tapered cone seacock. With hose connection on board.Made of bronze (seawater-resistant bronze alloy CB491K - CuSn5Zn5Pb5-B). Proven in classic yachting for decades.The seacock can be easily dismantled and reassembled for maintenance, cleaning and lubrication work, and two screws on the body allow the valve to be drained to protect it against freezing.Made by the American manufacturer SPARTAN, the valve is bolted with two screws directly to the hull or on a backing plate. A standard red bronze through-hull (not included) can then be screwed into the valve from the outside, ensuring a very safe and secure mount.The bottom of the valve is ground flat, cast gutters ensure good adhesion of the sealing material and a perfect seal.The bronze handle can turn 180°, which ensures that the seacock is fully closed. The closed position is visible on the handle.UL-Marine-Listing (USA).The matching through-hull must be ordered separately.

From €79.90 *
Details
GUIDI Ball Valve Bronze with hard chrome plated brass ball
GUIDI Ball Valve Bronze with hard chrome plated brass ball
Ball valve made of the seawater-resistant bronze alloy CC499K (CuSn5Zn5Pb2-C), specially developed for marine applications.The ball is made of hard chrome-plated brass CW617N, an additional special surface treatment prevents the adhesion of dirt and incrustations. The shaft is made of seawater-resistant brass CW625N, the lever and fixing nut are made of stainless steel 304.The lever is coated with PVC (the colour may differ from the one in the photo).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €39.00 *
Details
GUIDI Ball Valve Bronze with PPS-Ball
GUIDI Ball Valve Bronze with PPS-Ball
Ball valve made of seawater resistant bronze CC491K. The stainless steel handle (AISI 304) is covered with PVC (the colour may differ from the one in the photo).The ball is made of PPS plastic, a semi-crystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained at high temperatures. The special surface of the ball prevents the adhesion of dirt and incrustations.A special surface treatment of the ball, improves its encrustation-resistant properties.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

€199.00 *
Details
Lockable handle for ball valve VIR
Lockable handle for ball valve VIR
This valve lever can be blocked in open or closed position by means of a sliding latch. A drill hole in the lever allows a padlock to be inserted or a lead seal to be applied.That way, the latch cannot be moved and the ball valve is secured against unauthorised operation. Suitable for VIR ball valves made of gunmetal (bronze).Some near shore areas and inland areas are designated as "No-Discharge Zones" where the discharge of any onboard waste is strictly prohibited. Many of these areas require a secured waste retention system. This demand can be met with a lockable ball valve.This article fits to our bronze ball valves VIR.

From €7.90 *
Details
Spare Kit for seacock BLAKES
Spare Kit for seacock BLAKES
Replacement set for sea cook BLAKES POPULAR Plus. The kit comes with bolts and nuts.

From €115.00 *
Details
VIR bronze ball valve
VIR bronze ball valve
Branded ball valve made of seawater-resistant bronze alloy CB491K CuSn5Zn5Pb5-B with full bore. Female thread to ISO 228/1 on both sides, the ball is made of hard chrome-plated brass CW617N with PTFE sealing shells. The lever is made of steel with a special GEOMET corrosion coating, with red PVC coating. Nominal working pressure PN40.A lockable lever is available (see accessories).Gewindeart: BSPGewindeform: zylindrisch, bzw. parallelDie Gewindegrößen sind Nenngrößen, sie bezeichnen nicht den Gewindedurchmesser.

From €19.94 *
Details
VIR Bronze ball valve with A4 stainless steel ball
VIR Bronze ball valve with A4 stainless steel ball
Brand name ball valve made from seawater resistant copper alloy CB491K CuSn5Zn5Pb5-B, fully opening. Inner threads according to ISO 228/1 on both sides, the ball and the shaft are made from stainless steel A4 (AISI 316) for exceptionally high corrosion consistency. Steel handle with special GEOMET-corrosion protection and red PVC coating, the nominal rated pressure is PN40.A lockable handle ist deliverable (see accesories).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

€126.00 *
Details

Zuletzt angesehene Artikel