1430*03 Bilge-Tauchpumpen RULE AUTOMATIC
1430*02 Bilge-Tauchpumpen RULE MATE - Bild 2
1430*03 Bilge-Tauchpumpen RULE AUTOMATIC
RULE-AUTOMATIC RA500/12V electronic control
The tried-and-tested RULE-AUTOMATIC (RA) bilge pumps feature a built-in microprocessor which checks for the presence of water every 150 seconds by briefly activating the pump (without a mechanical switch). Power consumption for the test run is low at approx. 0.2–0.5 Ah per day. Whilst conventional bilge pumps with float switches typically activate at a water level of around 5 cm, the RULE-AUTOMATIC switches on at around 1.6 cm and pumps the bilge water down to a residual water level of around 0.6 cm.
The series features a plastic housing, an easily removable strainer base plate and a quiet-running, fully enclosed motor. The non-return valve reduces the backflow of water into the bilge, whilst concealed vents in the pump housing prevent air pockets in the hose installations. The threaded outlet allows the use of different hose connectors, depending on the specific model and connection diameter.
Technical features
- Automatic bilge pump for 12-volt on-board electrical systems
- Electronic water level control without a mechanical float switch
- Test run every 150 seconds
- Activation level approx. 1.6 cm
- Pumps down to approx. 0.6 cm residual water level
- Plastic housing with removable strainer base plate
- Fully enclosed motor
- Non-return valve to reduce backflow of water
- Concealed vents in the housing to prevent air pockets
from €135.01*
€135.01*
Prices incl. VAT plus shipping costs
Description
The tried-and-tested RULE-AUTOMATIC (RA) bilge pumps feature a built-in microprocessor which checks for the presence of water every 150 seconds by briefly activating the pump (without a mechanical switch). Power consumption for the test run is low at approx. 0.2–0.5 Ah per day. Whilst conventional bilge pumps with float switches typically activate at a water level of around 5 cm, the RULE-AUTOMATIC switches on at around 1.6 cm and pumps the bilge water down to a residual water level of around 0.6 cm.
The series features a plastic housing, an easily removable strainer base plate and a quiet-running, fully enclosed motor. The non-return valve reduces the backflow of water into the bilge, whilst concealed vents in the pump housing prevent air pockets in the hose installations. The threaded outlet allows the use of different hose connectors, depending on the specific model and connection diameter.
Technical features
- Automatic bilge pump for 12-volt on-board electrical systems
- Electronic water level control without a mechanical float switch
- Test run every 150 seconds
- Activation level approx. 1.6 cm
- Pumps down to approx. 0.6 cm residual water level
- Plastic housing with removable strainer base plate
- Fully enclosed motor
- Non-return valve to reduce backflow of water
- Concealed vents in the housing to prevent air pockets
Downloads
