Brass portlight | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	version	D1 (inch)	D1 (mm)	D2 (mm)	D3 (mm)	S (mm)	M (mm)	weight (kg)	Price (unit)	Delivery time	Note list	Buy

Fixed port. Mid quality. Brass, attaches with screws.
Available with two surface options:
Cleanly turned polished brass or matte chromed brass.
Hardened single-pane safety glass, depth 8 mm.
CE-certified.

Also available with deadlight.

Description

Fixed port. Mid quality. Brass, attaches with screws.
Available with two surface options:
Cleanly turned polished brass or matte chromed brass.
Hardened single-pane safety glass, depth 8 mm.
CE-certified.

Also available with deadlight.

Questions about the product?

Similar products

Brass portlight frame

Brass portlight frame

Brass portlight frame for portlight art.-no. 1873-.... accurate drilled, not polished.

From €121.00 *

More products from the category Portholes

Brass bull´s eye polished or chromed

Brass bull´s eye polished or chromed

Light brass design, with a polished or chromed finish.The ports come ready for installation: drilled, with outer ring and sleeve bolts M4 x 16 mm.Glass depth 4 mm.Weight approx. 750 g.Comes with a glass pane.The glass pane version is not CE certified, may be used in certain areas of boatbuilding (not in areas of the boat exposed to the direct brunt of the sea), appropriate for decoration and for interior applications.Also available as CE certified version with PMMA pane.

From €98.00 *

Brass bull´s eye polished or chromed PLEXIGLAS

Brass bull´s eye polished or chromed PLEXIGLAS

Round brass port, polished or chromed finish. Equipped with Plexiglas (PMMA glass).These ports are not only useful in boatbuilding - the Plexiglas design is CE certified - but also for many other applications in decoration and interior design.A simple and inexpensive port with high functionality.Comes ready to install and drilled, with matching backing ring for the outside.Spare parts, such as gaskets, bow nuts, etc., are available.CE certification: catagory A to D, area I, III, IV.

From €121.00 *

Brass bull´s eye polished/chromed PLEXIGLAS (CE)

Brass bull´s eye polished/chromed PLEXIGLAS (CE)

Small, polished or chromed porthole. Plexiglass design (with CE certification). Comes with sealing ring and concealed screws. Weight approx. 1.7 kg.

From €229.00 *

Brass bull´s eye polished/chromed PLEXIGLAS (CE) 100x230mm

Brass bull´s eye polished/chromed PLEXIGLAS (CE) 100x230mm

Midweight design of brass or chromed brass with Plexiglas. For installation from the inside, with soft rubber sealant. Comes with a backing ring (outer ring). Good seal thanks to adjustable hinge bolts and snap-in, adjustable toggle fastening. These ports have a CE certification (Category A-D, Areas I, III and IV). Thickness of glass: 6 mm,40/50 mm ligament. It's large thickness makes it well suited for all-wood walls.

From €339.00 *

Brass bull´s eye polsihed/chromed PLEXIGLAS (CE)

Brass bull´s eye polsihed/chromed PLEXIGLAS (CE)

Portlights of light design, made from polished or chromed brass.These ports come pre-drilled and ready to mount with outer ring and sleeved screws M4 x 16 mm, glass thickness 4 mm.Approximate weight 750 g.Comes with CE-certified Plexiglas (PMMA-glass)(Design Category A-D, Areas I, II, III, IV).Intended for use in boatbuilding (in protected areas of the boat), as decorative pieces and in the cabin.

From €98.00 *

Brass bull's eye elliptical

Brass bull's eye elliptical

Portlights of (ellipsoidal) oval shape. Polished or chromed brass. Installation from outside.The frame for this port is installed in the cabintop from the outside, which gives it a smooth look.A good seal is achieved through the port's adjustable hinge bolts, as well as adjustable snap-in locking knobs.Comes complete with matching backing ring and sleeved screws.Ideally suited to cabintop thicknesses of about 18 mm.

From €239.00 *

Brass bull's eye oval

Brass bull's eye oval

Small polished or chromed-brass port.Design comes with glass.Weight: approx. 1.7 kg.Shipment with backing ring and sleeve bolts.Also comes in a CE-certified design (CE-category A to D, areas I, III, IV) with Plexiglas.

From €229.00 *

Brass bull's eye polished or chromed

Brass bull's eye polished or chromed

Mid-weight design of brass or chromed brass.Installed from inside, with soft-rubber seal. Comes compete with matching backing ring for the exterior. Good water-tightness through adjustable hinge bolts and snap-in, adjustable toggle locks.Because of its large depth, well suited to wood cabintops.Thickness of glass: 6 mm.

From €339.00 *

Brass portlight

Brass portlight

Fixed port. Mid quality. Brass, attaches with screws.Available with two surface options:Cleanly turned polished brass or matte chromed brass.Hardened single-pane safety glass, depth 8 mm.CE-certified.Also available with deadlight.

From €166.01 *

Brass portlight frame

Brass portlight frame

Brass portlight frame for portlight art.-no. 1873-.... accurate drilled, not polished.

From €121.00 *

Brass portlight frame heavy

Brass portlight frame heavy

Counter frame for portlight (Article-No. 1815-...), brass drilled, without screw holes.

From €139.00 *

Brass portlight frames

Brass portlight frames

Polished brass portlight frames, oval design, drilled, without glass.

From €96.00 *

Brass portlight frames FORESTI

Brass portlight frames FORESTI

Polished brass porthole frames.With round, narrow design and drilled holes. FORESTI & SUARDI Coming from a crafts business, established in 1961, the north Italian brass foundry FORESTI &SUARDI Has become a modern industrial company that hasn't forgot about its traditional roots. Nowadays FORESTI manufactures all kinds of boat fittings, ship windows, sanitary accessories, interior fittings And especially a wide range of high quality lights for the use on ships but also on land.

From €26.00 *

Brass rectangular bull's eye polished or chromed

Brass rectangular bull's eye polished or chromed

Light-quality port of brass or chromed brass to be installed from inside.Comes complete with matching outer ring, drilled.With soft-rubber seal.Comes with glass window.Weight: 5 kg.Also available in CE-certified (CE-category A to D, Areas I, III, IV) design with plexiglass (PMMA-Glass).

From €389.00 *

Brass round bull´s eye polished or chromed

Brass round bull´s eye polished or chromed

Round brass port with polished or chromed finish. Equipped with hardened glass.The brass pieces are precisely machine cast, the hinges are made of stainless steel and the seal is neoprene rubber.These ports are not only used in boatbuilding, but also in many other areas of interior decoration. A light and inexpensive port with high functionality.Comes completely ready for installation and drilled, with a matching backing ring for the exterior.Such spare parts as seals, turning nuts, etc. are available.These bullseye ports with glass panes are not CE certified. For that, choose the same ports with Plexiglas panes (Article-No. 1740-...).

From €121.00 *

Brass window CE polished or chromed PLEXIGLAS

Brass window CE polished or chromed PLEXIGLAS

Light-quality port of brass or chromed brass to be installed from inside.Comes complete with matching outer ring, drilled.With soft-rubber seal.Weight: 5 kg.CE-certified design (CE-category A to D, Areas I, III, IV) with plexiglass (PMMA-Glass).

From €389.00 *

Bronze bull's eye SPARTAN

Bronze bull's eye SPARTAN

High quality port of cast marine bronze,tumbled matte finish.Clasic short-oval shape.The ports are intended to be installed from the inside.Frame and outer ring are pre-drilled with countersunk holes D = 5 mm.Comes complete with matching outer ring.The large depth of the port allows installation in all-wood cabintops. The neoprene - soft rubber gasket - around the rim ensures a perfect seal.The hardened safety glass is sealed to the frame with silicone. Excellent detail: Drainage channels are built into the frame. Thus even when the ports get opened, no saltwater can get in. All ports come complete with removeable bronze-coloured-plasic screens. Replacement parts for these quality ports, including seals, screws and bronze turning nuts, available. Matching are the oval fixed ports. Made by the American traditional manufacturer SPARTAN.

From €790.01 *

Bronze bull's eye SPARTAN oval

Bronze bull's eye SPARTAN oval

High-quality yacht window made of cast marine bronze. Matt tumbled surface. Long oval classic shape. Made by the traditional American manufacturer SPARTAN.The window can be opened. It is closed with strong bronze knurled nuts.The windows are intended for installation from the inside. Frame and outer ring are already provided with countersunk holes (D = 5 mm). Supplied complete with matching outer ring. The large web depth also allows installation in solid wood structures.The neoprene soft rubber cord glued into the frame ensures perfect tightness. The tempered safety glass is sealed into the frame with silicone.A special design feature of SPARTAN windows: drainage channels are incorporated into the web of the frame. Therefore, when the window is opened, no (salty) dripping water can get inside.Each window comes with a removable insect screen made of bronze-coloured plastic.The long-oval fixed windows (see "similar products" below) from SPARTAN have the same glass and external dimensions and fit these ship windows exactly.

€913.00 *

Bronze bull's eye SPARTAN oval long

Bronze bull's eye SPARTAN oval long

Solid non-opening port.Classic long-oval shape.Cast bronze frame, tumbled matt finish.The pane, made of hardened safety glass, is installed from the outside and sealed with silicone. Thus this port is also appropriate for horizontal applications because water cannot collect in the frame.The frame comes drilled with 5 mm countersunk fastener holes.Glass depth 6 mm.Matches the long-oval opening ports from the American manufacturer SPARTAN.

€499.00 *

Bronze bull's eye SPARTAN rectangular

Bronze bull's eye SPARTAN rectangular

High quality port of cast marine bronze.Tumbled matt finish. Classic rectangular shape.Opens. Locks with a strong bronze turning nuts.The ports are intended to be installed from the inside.Frame and outer ring are pre-drilled with countersunk holes D = 5 mm.Comes complete with matching outer ring.The large depth of the port allows installation in all-wood cabintops. The neoprene - soft rubber gasket - around the rim ensures a perfect seal.The hardened safety glass is sealed to the frame with silicone. Excellent detail: Drainage channels are built into the frame. Thus even when the ports are open, no saltwater can get in. All ports come complete with removeable bronze-coloured-plasic screens. Replacement parts for these quality ports, including seals, screws and bronze turning nuts, available.Made by the American traditional manufacturer SPARTAN.

From €975.00 *

Bronze oval portlight frame

Bronze oval portlight frame

Polished bronze portlight frames, oval design, drilled, without glass.

From €103.90 *

Bronze portlight

Bronze portlight

Round bronze fixed port, chrome plated. Frame drilled with countersunk fastener holes. Sand-cast bronze, polished on the visible side.The glass is held in place with a ring nut and is sealed with silicone.Not CE-ceritified.

€149.00 *

Bronze portlight frame

Bronze portlight frame

Polished-bronze backing ring.

€47.90 *

Bronze portlight SPARTAN

Bronze portlight SPARTAN

Solid non-opening round port.Cast bronze frame, tumbled matt finish.The pane, made of hardened safety glass, is installed from the outside and sealed with silicone. Thus this port is also appropriate for horizontal applications because water cannot collect in the frame.The frame comes drilled with 5 mm countersunk fastener holes.Glass depth 5 mm.

From €256.00 *

Bronze portlights

Bronze portlights

CE-certified fixed portlights of medium strenght from the British manufacturer DAVEY.Molded from seawater-resistant bronze and hand-polished.Break-resistant, strengthened glass. Comes complete with the appropriate outside finishing rings. The frame and ring come pre-drilled.All visible parts are polished.It is possible to install fixed and opening ports (Article-No. 1035-...) next to each other without compromising appearance. These fixed ports are CE certified (Design category A through D, areas II, III, IV).

From €425.00 *

Bull's eye oval brass

Bull's eye oval brass

Mid-weight quality to be installed from inside.Polished brass.Design comes with glass window. Comes compete with matching backing ring for the exterior and sleeve bolts. Available in two depths (S). CE-certified version with plexiglass available on request.

From €559.00 *

CE certified oval fixed bronze portlight

CE certified oval fixed bronze portlight

Manufactured from seawater-resistant cast bronze.All visible surfaces are hand-polished.Resistant strengthened glass.The windows come complete with the appropriate outside finishing rings.These fixed ports look like the opening ports Article-No. 1033-.... and can be installed in combination with them. CE certification (Design category A through D, areas IIb, III, IV).

From €432.01 *

Fixed portlights, weld-in

Fixed portlights, weld-in

Fixed port, heavy-duty quality. The brass port ring comes with hinge bolts (D = 10 mm) on a tapering frame made from ship-building steel St. 37 (depth 10 mm)Gasket: Neoprene rubber.Glass: Hardened single-pane safety glass (thickness 8 mm).Manufactured to ISO (maritime) and CE standards.Steel deadlingts are also available for these ports.

From €546.00 *

Heavy brass portlight

Heavy brass portlight

Solid brass design for screwing in from the inside.Pins and hinge bolts made of V4A steel, hardened toughened safety glass (up to 8" portholes 8 mm thick, from 10" portholes 10 mm thick), special neoprene rubber seal.The window complies with the CE standard. A CE certificate is available.Standard delivery: sandblasted brass, undrilled.The counter-ring for the window is also available, as is the window with additional sea defences. You will find both further down on this page under "Similar products".

From €589.00 *

Heavy brass portlight with deadlight

Heavy brass portlight with deadlight

Solid brass design for screwing in from the inside.Pins and hinge bolts made of V4A steel, hardened toughened safety glass (up to 8" portholes 8 mm thick, from 10" portholes 10 mm thick), special neoprene rubber seal.The window complies with the CE standard. A CE certificate is available.Standard delivery: sandblasted brass, undrilled.The window is fitted on the inside with an additional deadlight, which is folded upwards for opening. The deadlight is made of shipbuilding steel, primed and fitted with welded-on hinge parts. A hard rubber seal is inserted into the panel.The window frame can be hinged on the top, right or left. Select your desired combination from the table below.The delivery time for the window with deadlight in your desired combination is 6 to 8 weeks.The counter-ring to the window is also available, as is the window without additional deadlight. You will find both further down on this page under "Similar products".

From €920.00 *

Large rectangular brass portlight

Large rectangular brass portlight

Robust rectangular brass ship windows ready to open, made according to ISO3903 with the frame as a brass hinged frame for mounting from the inside (Code IRB), tightened to the main frame by 2 bolt nuts M20 (or 4 for the bigger sizes).The Rubber sealing is made from neoprene, with stainless steel spindles, the window pane is made from 12 mm thick single security glass. Many separate designs are available on request, like for example with hinges on the left or with window panes made from insulation glass.

From €1,629.00 *

Large rectangular brass portlight with steel frame

Large rectangular brass portlight with steel frame

Robust rectangular brass ship windows ready to open, made according to ISO3903 with the frame as a frame for welding made from 10 mm shipbuilding steel (Code IRW).The Rubber sealing made from neoprene, with stainless steel spindles, window pane made from 12 mm thick single security glass. Many separate designs are available on request, like for example with hinges on the left or with window panes made from insulation glass.

From €1,439.00 *

Opening portlights with deadlight, weld-in

Opening portlights with deadlight, weld-in

Opening portlights with steel deadlight. Steel flange to weld in.Heavy-duty, also intended for installation in the transom.Brass window frame and steel deadlight are attached with hinge bolts (D = 10 mm) on a tapering frame made from ship-building steel St. 37 (10 mm thick).Gasket: Neoprene rubber.Glass: Hardened single-pane safety glass (depth 8 mm).Manufactured to ISO (maritime) and CE standards.

From €1,009.00 *

Opening portlights, weld-in

Opening portlights, weld-in

Opening port. Heavy duty, also intended for installation in the hull. On the tapered frame of shipbuilding steel, (St 37 material thickness, 10 mm) is a brass window ring with hinge pins (D = 10 mm). Seal: Neoprene rubber profile. Glass: hardened single-pane safety glass (thickness 8 mm). Made pursuant to ISO (maritime) regulations and CE norms. Steel screens are available for these ports.

From €714.00 *

Oval bronze opening portlights

Oval bronze opening portlights

Built from solid seawater-resistant cast bronze.All visible parts are hand polished.These opening ports can be screwed in from the inside and come complete with the appropriate outside finishing rings. Break-resistant, strengthened glass.CE certification is for use in the upper hull and cabin sides (Design category A through D, areas IIb, III, IV).Matching fixed ports, whose glass and total thickness are equal to those of these DAVEY ports, are also available.Thus it is possible to position opening and fixed ports next to each other without compromising appearance (See Article-No. 1039-...). Also available are fitting fly screens, where the form fits exactly to the shape of the ports.

From €770.00 *

Oval bull´s eye bronze

Oval bull´s eye bronze

Heavy-duty port made from seawater-resistant bronze for installation from inside.Comes complete with matching drilled outer ring.Soft-rubber seal.

€339.99 *

Portlight frame

Portlight frame

Brass portlight frame, polished or chromed, round design, with screw holes, without glass.

From €42.00 *

Portlight frame round / oval

Portlight frame round / oval

Brass portlight frame, polished or chromed, round design, with screw holes, without glass.

From €90.00 *

Rectangular bull´s eye bronze

Rectangular bull´s eye bronze

Heavy-duty bronze port for installation from inside.Comes complete with matching drilled outer ring.Soft-rubber seal.Tapered outward so rainwater won't flow into the boat.Not CE-certified.

€469.00 *

Round opening portlights with glass

Round opening portlights with glass

Brass port, polished or chromed finish, with a mounting depth of 50 mm.Comes ready for installation, complete with matching sleeve screws and outer ring.Use: boatbuilding (only in protected areas of the boat, see CE certificate), decoration and interior building - not intended for the outer hull of a seagoing boat.An inexpensive, but nevertheless functional port! Design with hardened glass.Not CE certified.

From €229.00 *

Round opening portlights with perspex (CE)

Round opening portlights with perspex (CE)

Polished or chromed brass port, with a mounting depth of 50 mm.Comes ready for installation, with matching sleeve bolts and outer ring.Use: boatbuilding (only in protected areas of the boat, see CE certificate), decoration and interior building - not accredited for the outer hull of a seagoing boat.An inexpensive, but nevertheless functional port!Design with plexiglass (PMMA).CE certificate: category A to D, area III.

From €229.00 *

Round portlight stainless steel, CE certified

Round portlight stainless steel, CE certified

CE-certified fixed portlights.Stamped and drawn stainless steel-plate port, polished finish.The frame has countersunk holes.Comes compete with matching backing ring for the exterior.Pane of hardened safety glass, 6 mm. These windows are CE certified (Category A, Areas III and IV). Manufactured in Holland.Fits for various wall depths, because of its flexible backing ring.Also appropriate for interior uses (in doors or decoration).

From €88.90 *

Round portlights bronze CE certified

Round portlights bronze CE certified

CE-certified portlights (bulls eyes), anufactured from solid seawater-resistant cast bronze. All visible surfaces are hand-polished. The glass is break-resistant and strengthened tempered.These opening ports can be screwed in from the inside and come complete with the appropriate outside finishing rings. The frames and finishing rings are pre-drilled and can be through-bolted or screwed into place.The matching DAVEY fixed ports (Article-No. 1036-...) are also available and have the same glass and total thickness. Thus it's possible to mount them next to each other without compromising appearance. (see similar products).These opening ports are CE certified (Design category A through D, areas II, III, IV).

From €544.00 *

Stainless steel opening portlight, CE certified

Stainless steel opening portlight, CE certified

Opening bullseye with patented stainless steel closure.Stamped and drawn A2 stainless steel-plate window, polished finish.The frame has countersunk holes. Comes complete with matching outside ring.Pane of hardened safety glass, 6 mm.Inexpensive top-quality port. These windows are CE certified (Category A, Areas III and IV). Manufactured in Holland.Fits for various wall depths, because of its flexible backing ring.Also appropriate for interior uses (in doors or decoration).

From €113.89 *

Zuletzt angesehene Artikel

Request sent successfully

Request wasn't send - a error occured. Please try again.